Mike_da_Spike

Odd. Your 2nd screenshot, is that pinballx or fx3 ? I can't see it correctly. And as Scutters says, please attach your files

If you bought a pre build cabinet with games, why not asking your supplier ? Your supplier receives money for front end software and tables that are free to download and you properly still has warrenty on the cab. I hope that Tom is in a good mood when he reads this, because he really doesn't like suppliers that sell a cabinet with his software. Btw. Did you checked this post ? https://www.vpforums.org/index.php?showtopic=45797

Well, you should as you are going to be European football champion this year !

PinballX Databasemanager takes care of the old.png/.gif files and put them into your recycle bin if you add another wheel image (with same or other extension) Just a small feature from Databasemanager

Your welcome. I hope this is a good workaround for you

For exiting tables with pup packs (I try to avoid to have them, but some tables really need them), I use pupcloser.exe : Pupcloser is created by Nailbuster. See : emulator_vpx_legacy [PinUP Virtual Pinball System] (nailbuster.com) Maybe it can help you as well PuPCloser.zip

I was able to test it on my test machine that has a I5 9500 CPU in it (and UEFI enabled). I don't dare to install it on the cab, but was just curious if it was compatible

Nothing to do with PinballX, but I was curious if my Pinball machine could run Windows 11 But my I7 7700 CPU is not able to run Windows 11 ? I think a missed change for Microsoft to only support gen 8 or higher ...

Good catch Scutters and sorry Tom I didn't check it yet. (-shame-) I have some ideas to use this, but limited time because of work and private life. Thanks for updating this already

Contact DnaDisturber via https://www.vpforums.org/index.php?showtopic=44580

Isnt device setup manager to be used to check, update and download devicce drivers ?

If you pipe the command line (with your old regional settings) to a text file ( > pinemhi.txt), do you see the non printable characters in the text file ? If so, ask as @scuttersmentioned DNA for a modification for your language settings

You can tey to boot the "last known good configuration" My cabinet is internet connected. I always update monthly security updates and the major Windows 10 releases. No issues

Please post your log.txt and your pinballx.ini after the issue occurs. Check also your eventlog for application errors and post the complete error as well. That will probably mention the app that is crashing

Version 21.06.23.0 released. Small update to align to PinballX 5.15 that supports now 60 systems instead of 40.

Searching a bit further, I found this option : I will try to uncheck this and see what is happning.

This doesn't have anything to do with PinballX, but it is driving me crazy, I have this issue on my normal (test) PC, arcade cabinet and pinball cabinet. On all these devices, I shutdown Windows 10 via start button, power icon, shutdown (sometimes on the cabinet, I use the shutdown option of PinballX. Not sure if that causes the same issue. To be investigated). After that, I always power off the complete PC/cabinet I think with upgrading to version 21H1, Microsoft changed something in th epower off behaviour. I see that most of the times, the PC is not going in shutdown , but it is in sleep/hibernation mode. My PC shows : (that's almost 3 days uptime) Checking eventlog : I shutdown my PC (and turned it off at 16:10 instead of shutdown (that's the command I gave), it is going into sleep mode and after powering up : and the clock changes to the correct time : In power management I see that "allow hybrid sleep" is set to "On" But even set it to to "Off" give this behavior this behavior causes me sometimes issues on my cab, as PinballX thinks it was not a cold restart (and I know, this is not a PinballX issue !) Anyone has an idea when I hot the "shut down" option that the machine is actually going to shutdown, instead of sleep/hibernating ? (Sorry. I know that this should be on a Windows forum, but first try to get an answer from my pinball friends)

Maximum ammount of systems is set to 40 (was less) Maybe do a feature request to increase this

confirmed ! thanks Tom ! Take some rest now

93% ??

Thanks Tom ! Should you not sleep at this time ?

I now get the following message via Filezilla : Status: Resolving address of ftp.gameex.com Status: Connecting to 185.177.125.137:21... Status: Connection established, waiting for welcome message... Status: Initializing TLS... Status: Verifying certificate... Status: TLS connection established. Command: USER Mike_da_Spike Response: 331 Password required Command: PASS *************** Response: 530 User cannot log in. Error: Critical error: The remote server returned an error: (530) Not logged in. Something changed to login ?

Thanks Tom !

To add some additional input to draco: PinballX will use all the controllers and uses the input as controller 1. This is for people with multiple joysticks and remove and add them to windows. So for example joy2 button2 will be used in pinballx as button2. All your joysticks button 2, will do the same actions as what is defined in pinballx button2 (although it says joy1). And an example I had myself multiple time. When my grandkids are playing with y coin chute, one of the witch that will make contact when a coin is dropping, will sometimes give a constant contact as the switch will not release it. This causes in pinballx also a fast wheel rotation. Just un releasing the switch fix it for me (and yes, that took a couple of weeks to figure it out) Also an extra device like my stream deck caused issues when I put it behind an usb hub. This was caused by my teensy controller that was also on the same hub. When activation the teensy driver (Dof), the stream deck did key presses a lot of times. So a lot of things can happen with input device

Do you have your GeeekPi USB Encoder behind an usb hub or directly attached to your main board?