hlr53

Here are my settings.

I'll fire up my cab tomorrow and post my settings.

Forgot to mention I'm running v1.3 beta 2. I've got to start updating stuff including PBX. Running 2.29.

Not sure if I can help but I have a DMDv3 and use dmdext. When I fire up PBX the first time all the pixels turn a dimmed red. I fire up any FX2 game and the DMD starts after the table loads. When I ESC back to the PBX wheel menu the DMD goes off. ESC always works. Here are my PBX settings:

Ahhh... OK, my bad. Never knew the different video modes in VPX existed. I just did a default install. I can understand the timing issue problems with the different number of PC monitors, type of TV monitors (Mine has a gaming mode), OS type, mobo type, GPU type and GPU driver type, etc, etc...... I typically way over-spec my PCs for the tasks at hand, which tend to minimize a lot of problems, albeit making it more expensive than it has to be. I learned this over 30 years of gaming. Doing a knowledge search this AM for my own edification. This was discussed back in the middle of 2016. http://www.vpforums.org/index.php?showtopic=34672&hl=focus&page=4 Thanks! Harry

i haven't had any of these issues, that am aware of? Still on v2.29 Win 10 pro, i7-6700, 500gig Toshiba SSD, 2TB Toshiba 7200rpm, GTX1080. 40/28/DMDv3. I'll test more thoroughly on the next PBX release. In VPX I am running "disable desktop composition", whatever the hell that means?

OK. I will try it today and see what happens? Have Honey-DO things this AM

Is it this table? South Park (Sega)(1999)(Knorr)(FS-DT)(VP10) 1.2 I can download and see if it works on my system.

Hey dude, just trying to help. I have no idea what your skill set is?

It's working fine for me. I used Taxi (Williams 1988).VPX. Did you download Taxi (Williams 1988).directb2s and put it into the table directory? I haven't done this stuff in 6 months and forgot to grab the ROM. The table crashed on me the first time

I'm running a 2 monitor system with a DMDv3. I don't have that many VPX tables loaded yet but B2S works fine. Give me a link to download a table you are having problems with and I will see if it works for me. I can try it later today.

It is the dsplay It is the 2D/3D API that Windows has installed.

Check in the nVidia control panel and make sure the 1070 is assigned to FX2. Even if it shows assigned, reassign it again. This happens when WIndoze 10 grabs a generic video driver to the card.

Yep, give credit where credit is due. They look sweet in that interface. I have everything working in PBX but haven't done the wheel images for FX2. These are a MUST! Beautiful work! Thanks!

Well, they will if you are Arcooda Pinball in Australia and build your cabinets with 42" LCD touchscreen displays. Why you would want to slop up your display with fingerprints is baffling to me? Bad enough keeping my iPhone clean. Arcooda Pinball When I get a chance I will have to install CameraMod.

I'm using FileZilla 3.23.02 and the site is working for me.

Did you bring any tables in via game manager? IIRC, I had to add tables manually. FX2 was automatic.

I used what Tom built into PBX. I only tested the first few rows. However, I could not get it to call up the DX11 version which is what I need to use my pinDMD3. Plus, the PBX scripting was very slow in table selection. Problem is Far Sight built the new interface code mainly for mobile touchscreen use. (Their Stern launch has been an epic fail. Just unbelievable! It's not like they don't have good programmers. Just lousy leadership and project management). I've put PBA on the back burner for now because I've been concentrating on adding FP and VPX tables. I tried adding PBA as a custom entry but it loads all the tables to the wheel menu, even without giving it a tables path. Perhaps, someone can tell me how to stop that? I just want it to call PBA DX11 and I will do table selection inside it. I haven't had time to try out the CameraMod yet.

From PBX I launched various J P Salas VP tables and held either flipper at least 10 secs and could not produce an overflow. i7-6700 16 gig Windows 10 Pro GTX1080 Using keyboard because my cab buttons are not wired up yet. Logitech wireless.

I've been doing my Future Pinball tables and for table videos I load the FP table in PinballX but don't start it. I press the Windows key + G and do a video grab that lasts for 7 sec or so. It saves them to the Videos/Captures folder. I then put it into Windows Movie Maker and rotate 90 deg.Then into the appropriate Future Pinball Media folders. PBX loops them automatically.

PinballX which is marked Application 971KB if you have Details selected in File Explorer

Expired for me also. Tom needs to fix. http://www.howtogeek.com/227093/how-to-block-an-application-from-accessing-the-internet-with-windows-firewall/ works. Thanks arngrim! I will leave the rule in place until fixed.

Good to know. I am still in the process of adding VPX tables and haven't played any VP9 yet. I think I will make custom lists and keep each in different directories when I get to that point.

Do the grid X Y positions in the XML file look correct? Ever since PBA redid their menu interface to also work as a touch screen for mobile devices, it has been a PITA for all involved.

Interesting. I don't have compatibility mode enabled for FP because it caused me problems. Using Win 10 Pro. I was getting some weird behavior on Slamt1ilt's tables and noticed I had to check Vertical Sync in Preferences. Fixed everything. Man, I love his tables! The Multimedia is insane. Running pinDMD3 and everything is smooth as silk in PBX. For now.....