Here is the Zaccaria Pinball database for May 2025

[DakotaPinball]

Could someone tell me where to find the Zaccaria Pinball database? The one I downloaded from here only has 118 tables out of the 155 I believe are currently available, including one that I think was recently added to Steam yesterday.
Yes, the Zaccaria database exists here with the latest or nearly latest releases from 2025.

[Draco1962]

I moved this to the correct PinballX subforum. Requests such as this belong in the General subforum (here). Thank you.

[Mike_da_Spike]

Check this : 

 

It has the link to steam, to add all the missing tables as well

[DakotaPinball]

5 hours ago, Mike_da_Spike said:

Mira esto : 

 

Tiene el enlace a Steam, para agregar también todas las tablas que faltan.

I followed the steps according to the tutorial, but the DLCs don't appear.
I also downloaded your XML, but when I put it in, I don't know what's happening, but the tables don't appear, and the screen stays black.

[DakotaPinball]

I managed to get Zaccaria to load, but it doesn't know how to choose the table I choose (this happens to me with Mike_da_Spike's zacaria.xml). With the one I have, the tables are very incomplete. It loads the table and starts, but without taking into account the number of players or any other method that I can't solve.
I'm attaching the LaunchZaccaria.ahk in case I have any incorrect parameters.
And I'm sorry to be a pain with each system, but this isn't easy to get working. If it weren't for the fact that I'm passionate about pinball, I would have thrown in the towel.

Zaccaria.xml Zaccaria_Dakota.xml ZaccariaLauncher.ini LaunchZaccaria.ahk

[Mike_da_Spike]

You don't need LaunchZaccatria.ahk as this was used for sending keystrokes, which isn't needed anymore
Just have the fx3launcher needed from JoyRider with your modified ini (you can rename the launcher to another name).
The INI should not contain 

PATH=P:\SteamLibrary\steamapps\common\Zaccaria Pinball\ZaccariaPinball.exe

as the launcher is always launch steam with the parameter path
I use the following start parameter :

STARTPARAMS=-applaunch 444930 -rotate right -skipmenu

PinballX should be pointed to the FX3launcher.exe (or the renamed exe file).
if yo uhave the parameters correct in the INI file , you can use it like I have : 

 

btw, I like your images your shared. I also used your Pinball Wicked images. Do you have them for other systems as well ?
maybe you can make a 'pack' for all the systems you have and put them in the download section

[DakotaPinball]

12 hours ago, Mike_da_Spike said:

You don't need LaunchZaccatria.ahk as this was used for sending keystrokes, which isn't needed anymore
Just have the fx3launcher needed from JoyRider with your modified ini (you can rename the launcher to another name).
The INI should not contain 

PATH=P:\SteamLibrary\steamapps\common\Zaccaria Pinball\ZaccariaPinball.exe

as the launcher is always launch steam with the parameter path
I use the following start parameter :

STARTPARAMS=-applaunch 444930 -rotate right -skipmenu

PinballX should be pointed to the FX3launcher.exe (or the renamed exe file).
if yo uhave the parameters correct in the INI file , you can use it like I have : 

 

btw, I like your images your shared. I also used your Pinball Wicked images. Do you have them for other systems as well ?
maybe you can make a 'pack' for all the systems you have and put them in the download section

I'll send you the launchers I have with the backgrounds, no problem (I don't know how to upload them, I'll send them to you and you can put them wherever you want, it's a pleasure for me that you like them).
With Zaccaria, there's no way. I followed your steps, but if I modify the ini as you tell me, Zaccaria doesn't start. I don't know why. If I use mine, yes, but I have no way to change the number of players or game mode. I don't know what else to do. I don't know if it's because I have it downloaded to the secondary drive since the primary one is almost full.
My routes are:

C:\Pinball_Lanzadores\Zaccaria.Launcher.App

P:\SteamLibrary\steamapps\common\Zaccaria Pinball\ZaccariaPinball.exe

 

The difference I see is that you have the Zaccaria in another system, I have it in the same pinballX that already turns the tables by itself.

 

The difference I see is that you have Zaccaria on another system. I have it on the same pinballX, which already rotates the tables on its own.

Where do I send you the backgrounds for the launchers I have right now? Until I configure them and they work correctly, I won't finish them. But I have 3. Tell me where and I'll send them to you.

 

 

 

ZaccariaLauncher.exe ZaccariaLauncher.ini

[Mike_da_Spike]

I am currently away from my computer and expect to be for the next couple of days. Following your post, I checked my Zaccaria system and I have configured 116 (or 118) tables.

I tested a few tables for one and two players in both arcade and classic modes, and they all functioned correctly.

I can't remember how I setup my zaccaria system, but it was configured as 'other system'. I  will gladly send you my files via private message once I have access to my computer again.

[DakotaPinball]

5 hours ago, Mike_da_Spike said:

Actualmente no estoy en la computadora y espero estarlo durante los próximos días. Después de tu publicación, revisé mi sistema Zaccaria y configuré 116 (o 118) tablas.

Probé algunas mesas para uno y dos jugadores en los modos arcade y clásico, y todas funcionaron correctamente.

No recuerdo cómo configuré mi sistema Zaccaria, pero estaba configurado como "otro sistema". Con gusto te enviaré mis archivos por mensaje privado cuando vuelva a tener acceso a mi computadora.

Thank you, I will look forward to it.

[crumols2k]

On 5/5/2025 at 6:30 PM, DakotaPinball said:

I'll send you the launchers I have with the backgrounds, no problem (I don't know how to upload them, I'll send them to you and you can put them wherever you want, it's a pleasure for me that you like them).
With Zaccaria, there's no way. I followed your steps, but if I modify the ini as you tell me, Zaccaria doesn't start. I don't know why. If I use mine, yes, but I have no way to change the number of players or game mode. I don't know what else to do. I don't know if it's because I have it downloaded to the secondary drive since the primary one is almost full.
My routes are:

C:\Pinball_Lanzadores\Zaccaria.Launcher.App

P:\SteamLibrary\steamapps\common\Zaccaria Pinball\ZaccariaPinball.exe

 

The difference I see is that you have the Zaccaria in another system, I have it in the same pinballX that already turns the tables by itself.

 

The difference I see is that you have Zaccaria on another system. I have it on the same pinballX, which already rotates the tables on its own.

Where do I send you the backgrounds for the launchers I have right now? Until I configure them and they work correctly, I won't finish them. But I have 3. Tell me where and I'll send them to you.

 

 

 

ZaccariaLauncher.exe 2.82 MB · 0 downloads ZaccariaLauncher.ini 1.9 kB · 0 downloads

where is this assembly of zaccaria's launcher i've looked on the ftp but can't find it
i like it a lot

[Mike_da_Spike]

Check this post nr 3 : https://forums.gameex.com/forums/topic/31319-here-is-the-zaccaria-pinball-database-for-may-2025/#findComment-225024

 

[DakotaPinball]

19 hours ago, crumols2k said:

where is this assembly of zaccaria's launcher i've looked on the ftp but can't find it
i like it a lot

I have already given up on Zaccaria Pinball, the only thing I can do is launch the selected table but with 1 player. I have given up now, I cannot get this system to work, I don't know if it is because I have Steam and Zaccaria Pinball with the latest updates and it just doesn't work. If I find the solution I will post it here in case it doesn't work for other people like us. But anyway, this website is the only one that has helped me configure systems in PinballX and if it works for them and not for me, I must have something wrong with my configuration or I am simply at my limit

[Mike_da_Spike]

On 5/14/2025 at 5:02 AM, DakotaPinball said:

I have already given up on Zaccaria Pinball, the only thing I can do is launch the selected table but with 1 player. I have given up now, I cannot get this system to work, I don't know if it is because I have Steam and Zaccaria Pinball with the latest updates and it just doesn't work. If I find the solution I will post it here in case it doesn't work for other people like us. But anyway, this website is the only one that has helped me configure systems in PinballX and if it works for them and not for me, I must have something wrong with my configuration or I am simply at my limit

Not sure what's going on for you. It should work with latest steam version.

You can test it by setting up an extra system which won't use the launcher, but directly starts steam, like @Draco1962dI'd in the following post : https://forums.gameex.com/forums/topic/26401-guide-zaccaria-finally-has-direct-table-launch/page/2/#findComment-225137

If this works, change -"skipmenu_player 1" to 2 and retest.

I tested this with latest version of zaccaria and worked. (And that's exactly what the launcher is doing as well)