al4carat Posted March 31, 2020 Share Posted March 31, 2020 Hello, I'm hoping you can help me. I am building a new virtual pinball cabinet, and have 3 screens. My graphics card only handles two hdmi connections, so my third connection for the dmd is vga through the motherboard. I have all three running with windows 10. After I turn on the computer and run pinballx, pinball x does not recognize display 3. Only after I unplug the vga cord, wait for windows to recognize that it is unplugged, I re-plug in the screen and pinballx will finally display to display 3. In other words, I have to disconnect and reconnect my vga screen to view the dmd. Otherwise it shows up on screen 2 behind the directb2s. I have an i5-3470 with an AMD Radeon HD 7700. Any help would be appreciated. Link to comment Share on other sites More sharing options...
joyrider3774 Posted March 31, 2020 Share Posted March 31, 2020 When you disable pinballx autostart at windows start, is your dmd display detected and if so is it immediately detected? If not immediatly but after some time try starting pinballx through a batch files which uses a delay before starting pinballx.exe from the batch file. I would consider this to be a windows problem and not a pinballx problem as you have to physically detach your screen and reconnect it. So pinballx probably can't detect your dmd screen and there is nothing programmatically pinballx can do to fix this. Only thing i can think off is adding a delay to launching pinballx but that will only work if windows actually detects your dmd vga screen without disconnecting it. Does your videocard have other connections for exampke dvi or displayport as for both exists adaptors to hdmi which might give you the option to use all 3 screens with your videocard and nothing onboard it might also fix the problem Link to comment Share on other sites More sharing options...
al4carat Posted March 31, 2020 Author Share Posted March 31, 2020 Thanks for your response. Yes, my screen immediately turns on with windows. It shows the desktop as pinballx loads on the other two screens. And no, there are only two displayports on my video card. Link to comment Share on other sites More sharing options...
joyrider3774 Posted April 1, 2020 Share Posted April 1, 2020 Can you disable pinballx autostart, so windows only loads to desktop wait a minute and start pinballx manually does it still fail then? Or exit pinballx and start pinballx again Also you mention b2s you are certain the problem is inside pinballx not showing your dmd video and not in visual pinball when actually launching a game? Just to be sure we know the problem is visual pinball or pinballx as there is a difference Link to comment Share on other sites More sharing options...
al4carat Posted April 1, 2020 Author Share Posted April 1, 2020 Thanks for your reply. Pinballx autostart is disabled, and I can run visual pinball and have the dmd show up in display 3. It is only pinballx that needs the display unplugged. Link to comment Share on other sites More sharing options...
Mike_da_Spike Posted April 1, 2020 Share Posted April 1, 2020 Can you post your logfile and settingsfile as attachment? Link to comment Share on other sites More sharing options...
al4carat Posted April 2, 2020 Author Share Posted April 2, 2020 Here are the files. I hope the setupwizard.log is the one you are asking for. Al log.txt SetupWizard.log Link to comment Share on other sites More sharing options...
Draco1962 Posted April 3, 2020 Share Posted April 3, 2020 Actually please attach your pinballx.ini file. Thanks. Link to comment Share on other sites More sharing options...
al4carat Posted April 3, 2020 Author Share Posted April 3, 2020 Here is the Pinballx.ini file. PinballX.ini Link to comment Share on other sites More sharing options...
Mike_da_Spike Posted April 3, 2020 Share Posted April 3, 2020 Thanks for the logfile. Is this before or after you unplug the vga cable ? Because the logfile shows that it is finding 3 screens. If this is after, can you post a log file where the screen is not working in pbx, but working in windows ? Link to comment Share on other sites More sharing options...
al4carat Posted April 4, 2020 Author Share Posted April 4, 2020 Here is the logfile before I unplug the VGA cord. I have confirmed that Visual Pinball works and displays on screen 3, and PinballX does not. Thanks, Al PinballX.ini Link to comment Share on other sites More sharing options...
Mike_da_Spike Posted April 5, 2020 Share Posted April 5, 2020 5 hours ago, al4carat said: Here is the logfile before I unplug the VGA cord. I have confirmed that Visual Pinball works and displays on screen 3, and PinballX does not. Thanks, Al PinballX.ini 11.69 kB · 0 downloads Lol. This is the config file not the log file Link to comment Share on other sites More sharing options...
Draco1962 Posted April 5, 2020 Share Posted April 5, 2020 Kinda need to see the log.txt file. Look for it in the \pinballx\logs path. Link to comment Share on other sites More sharing options...
al4carat Posted April 6, 2020 Author Share Posted April 6, 2020 Sorry about that, here is the log file. log.txt Link to comment Share on other sites More sharing options...
scutters Posted April 6, 2020 Share Posted April 6, 2020 Still shows finding 3 screens, weird. I'd be tempted in Settings.exe to try changing the DMD screen to the same screen as the backglass deliberately, but then adjust the DMD x and y positions to move it off the backglass to the dmd screen. Don't know how your screens are setup in windows but maybe x = 1950 (backglass width + your current offset of 30)? Link to comment Share on other sites More sharing options...
al4carat Posted April 6, 2020 Author Share Posted April 6, 2020 Scutters, that worked!! Thanks for your help. I was racking my brain trying to figure it out, all I needed was a work around. Al 1 Link to comment Share on other sites More sharing options...
Recommended Posts