susoarkangel Posted October 12, 2019 Posted October 12, 2019 (edited) Pinball fx3 does not open in PinballX he devidotocar something because it does not make sense that it worked for me and regrets it does not load me Pinball FX3, this one does load out of PinballX but if I select a table from Pinball X it opens Pinball FX3 steam I don't know if I have to copy a steam file in pinball FX3 or Pinball FX3 to Steam They can help me, I don't know what else to do he desistalado and installed repeatedly Steam, Pinball X but I have no way. Edited October 12, 2019 by susoarkangel
Mike_da_Spike Posted October 12, 2019 Posted October 12, 2019 I don't understanding your exact problem, but can you post your pbx log and ini file and your fx3 database xml as an attachment, we can have a closer look. Pkease post your log after the issue happen
susoarkangel Posted October 13, 2019 Author Posted October 13, 2019 I pass the files you tell me, formatted the entire PC again but nothing remains the same I did these steps again. 1. install STEAM 2. Install Pinball FX3 3. You install PinballX And I have pinball FX3 installed in c: / Games / Pinball FX3 In case it helps thanks for your help log.txt Pinball FX3.xml PinballX.ini
BrandonLaw Posted October 13, 2019 Posted October 13, 2019 I do not believe this is directly related to PinballX. The process is trying to start correctly but exits immediately upon trying to start FX3. I see you have a GT630...benchmarks show the minimum card to run FX3 is gt450. Benchmarks show the GT630 is less than that? Have you actually had FX3 running correctly from steam launch? Also, make sure you launch through steam at least once after initial install.
Mike_da_Spike Posted October 13, 2019 Posted October 13, 2019 Can you try to run PinballX as admin and retry ?
Draco1962 Posted October 13, 2019 Posted October 13, 2019 Let's back up a minute. Is this a standalone version of Pinball FX3 or the Steam Version? If it is the Steam version, then the install directory being noted does not look correct to me.
susoarkangel Posted October 13, 2019 Author Posted October 13, 2019 2 hours ago, Draco1962 said: Let's back up a minute. Is this a standalone version of Pinball FX3 or the Steam Version? If it is the Steam version, then the install directory being noted does not look correct to me. It is the independent version but Steam, I mean that I have not downloaded it from steam but it is a version that has up to volume 3 of williams and is steam since I have had it running until boomb stopped working and just wants to connect steam
susoarkangel Posted October 13, 2019 Author Posted October 13, 2019 4 hours ago, BrandonLaw said: I do not believe this is directly related to PinballX. The process is trying to start correctly but exits immediately upon trying to start FX3. I see you have a GT630...benchmarks show the minimum card to run FX3 is gt450. Benchmarks show the GT630 is less than that? Have you actually had FX3 running correctly from steam launch? Also, make sure you launch through steam at least once after initial install. It's not that it closes, it's that you want to open the Steam and search to download steam pinball FX3. The version that I have even installs steam_emu.ini steam_api.cdx steamclinet.dll in the pinball fx3 directory
Mike_da_Spike Posted October 14, 2019 Posted October 14, 2019 Good catch @Draco1962! That this was not the steam version. I didn't noticed that. Normally the steam games are under the steam directory, but you have a "standalone" version. Right now you want to launch steam.exe but the path doesn't match to fx3 game. First try it if you can launch it from the command line (outside pinballx). Try instead of steam.exe the path to pinball fx3.exe with the parameters. This also works for the original steam version and loads a coupke of seconds faster.
susoarkangel Posted October 17, 2019 Author Posted October 17, 2019 I do not know what else to do, I have reinstalled everything for 3 times, installed Pinball FX 3 of an iso that I have with the Williams 4 pack this works all tables and active cabinet mode from windows. I install STEAM Install PinballX I configure Pinball FX3 I put the socks and everything ok but when I tell him to play a table I get a STEAM screen to download Pinball FX3, I download it although I have my full version of 91 tables in windows installed. I ask you for help please to be able to play with the 91 FX3 pinball tables since if under Steam there is only one available the others are paid Attached .ini files in case they can help thank you log.txt Pinball FX3.xml PinballX.ini PinballX-fx3windows.ini
Draco1962 Posted October 17, 2019 Posted October 17, 2019 I merged your latest topic in with the one you started for the very same issue a few days ago. I am not sure that what your asking for is possible as the integrated Pinball FX3 support is geared towards launching the Steam version. You may need to setup your non-Steam version to run as another program and any tables purchased via Steam through the integrated Pinball FX3 support only. Not an ideal solution but may be the only way this works for your situation.
scutters Posted October 17, 2019 Posted October 17, 2019 Did you try launching FX3 directly instead of via steam, maybe also adding the offline flag? So ini file entries like; WorkingPath=C:\Games\Pinball FX3 Executable=Pinball FX3.exe Parameters=-applaunch 442120 "-table_[TABLEFILE]" -offline
susoarkangel Posted October 17, 2019 Author Posted October 17, 2019 7 hours ago, scutters said: Did you try launching FX3 directly instead of via steam, maybe also adding the offline flag? So ini file entries like; WorkingPath=C:\Games\Pinball FX3 Executable=Pinball FX3.exe Parameters=-applaunch 442120 "-table_[TABLEFILE]" -offline The sleepy table opens and I can play thanks a lot, but I found another big problem when I want to leave that table to return to the selection menu of pinballX ignores. I say that Pinball FX3 once entered with these parameters does not return to pinballX any solution?
joyrider3774 Posted October 17, 2019 Posted October 17, 2019 This is only a guess but verify that process to monitor is correct set to "Pinball FX3.exe" to return to pinballx
susoarkangel Posted October 18, 2019 Author Posted October 18, 2019 23 minutes ago, joyrider3774 said: This is only a guess but verify that process to monitor is correct set to "Pinball FX3.exe" to return to pinballx If I configure the process to monitor "Pinball FX3.exe" as it loads, the Pinball FX3 logo closes and returns to PinballX to select a table. I don't know if anything could exist so that if I select the Q key, it will close Pinball FX3 completely and return to the PinballX selection menu I think his name is Killtask but I have no idea to do it. I am sincere newbie. I am not a newbie.
susoarkangel Posted October 18, 2019 Author Posted October 18, 2019 57 minutes ago, susoarkangel said: If I configure the process to monitor "Pinball FX3.exe" as it loads, the Pinball FX3 logo closes and returns to PinballX to select a table. I don't know if anything could exist so that if I select the Q key, it will close Pinball FX3 completely and return to the PinballX selection menu I think his name is Killtask but I have no idea to do it. I am sincere newbie. I am not a newbie. I am trying to make an .ahk file to close pinball fx3 when I leave the table but the key that I put Q does not work for me and it also remains open as many times as I have tried the file ahk.exe Know how to help me since this would work
Mike_da_Spike Posted October 18, 2019 Posted October 18, 2019 7 hours ago, susoarkangel said: The sleepy table opens and I can play thanks a lot, but I found another big problem when I want to leave that table to return to the selection menu of pinballX ignores. I say that Pinball FX3 once entered with these parameters does not return to pinballX any solution? Try to run pinballx as admin, run a table, play an hit the exit button. This should work
susoarkangel Posted October 18, 2019 Author Posted October 18, 2019 2 hours ago, Mike_da_Spike said: Try to run pinballx as admin, run a table, play an hit the exit button. This should work Thank you very much, now it works
Draco1962 Posted October 18, 2019 Posted October 18, 2019 So all issues reported in this thread are resolved? If so, as there were several option offered, would you mind noting which fixed the launching issue first reported?
Mike_da_Spike Posted October 18, 2019 Posted October 18, 2019 2 hours ago, Draco1962 said: So all issues reported in this thread are resolved? If so, as there were several option offered, would you mind noting which fixed the launching issue first reported? the launching issue was fixed by using Pinball fx3.exe as launch instead of using steam.exe
susoarkangel Posted October 18, 2019 Author Posted October 18, 2019 6 hours ago, Draco1962 said: So all issues reported in this thread are resolved? If so, as there were several option offered, would you mind noting which fixed the launching issue first reported? run as administrator WorkingPath = C: \ Games \ Pinball FX3 Executable = Pinball FX3.exe Parameters = -applaunch 442120 "-table_ [TABLEFILE]" -offline
Draco1962 Posted October 18, 2019 Posted October 18, 2019 Perfect! This will probably help someone else if they have the same issue down the line. Thanks!
Recommended Posts