[PinballX] Nukelauncher for Pinball Fx2 where is ?! It's web site is offline

[Animo79]

Hello to everyone.
I search nukepa for pinball Fx2 (plugin for pinballX) but in internet not found it.
Someone can help me?

Thank's

[scutters]

The author hasn't been online for a while by the looks of it so you might be out of luck.

Try messaging him (@time299 ) directly, depending on how his account is set up he'll get an email notification of your query and (hopefully) respond.

[Mike_da_Spike]

Im not using fx3 on my cab, but doesn't pinballx supports fx2 with grid size ? So you need to set the correct position in your xml that correspondents with the table ? 

[Draco1962]

The author fir Nukelauncher has not been seen for a few years. You will probably want to use the integrated support for Pinball FX2 instead.

[Animo79]

Thank's for your replies. I was contact the autor and i hope in a he answer.

@Draco1962 i tried all solution but without resolve the problem. i'm not able a convert fx2 in cabinet mode.

[Mike_da_Spike]

36 minutes ago, Animo79 said:

@Draco1962 i tried all solution but without resolve the problem. i'm not able a convert fx2 in cabinet mode.

What is not working for getting it in cabinet mode ?

Do you have contacted zen studios for a FX2 cabinet code ?

Pinball Cabinet Support Request | Zen Studios Ltd.

I did the same for Fx3 and received a code within a couple of days

[Animo79]

5 minutes ago, Mike_da_Spike said:

What is not working for getting it in cabinet mode ?

Do you have contacted zen studios for a FX2 cabinet code ?

Pinball Cabinet Support Request | Zen Studios Ltd.

I did the same for Fx3 and received a code within a couple of days

i can't contact zen studio because  fx2 is not in sale so it's a version not steam

[Mike_da_Spike]

46 minutes ago, Animo79 said:

i can't contact zen studio because  fx2 is not in sale so it's a version not steam

I think it is not only for the steam version, but for all saled versions to have the cabinet key

And the websit for zen is still up, so you can do a request.

Not sure of the nukelauncher will fix your issue to put it in cabinet mode. Thats only for selecting a table

[Draco1962]

While a little dated, please refer to section 4.3.12 Pinball FX2 and reference the non-Steam version area.

 

[Mike_da_Spike]

2 hours ago, Draco1962 said:

While a little dated, please refer to section 4.3.12 Pinball FX2 and reference the non-Steam version area.

 

Time for an update of documentation?@Draco1962

There are people overhere that are willing to help, to make an update documentation for PinballX

[Tom Speirs]

Hi,

Ive been meaning to fix the WIKI so people can contribute. Sorry, I will get on that.

Cheers.

Tom.

[Tom Speirs]

Is there anything else i need to do?

[Mike_da_Spike]

No nothing. Maybe wiki is a good start, or we need to update the manual, with all the new options since the manual was released

[Draco1962]

On 10/22/2021 at 6:25 AM, Mike_da_Spike said:

Time for an update of documentation?@Draco1962

There are people overhere that are willing to help, to make an update documentation for PinballX

Hi Mr. da_Spike  Please accept my apology for not responding sooner. Help is always welcome and you, Scutters, and a few others are cream of the crop for which I am thankful as I am certain the rest of the community will note.

There is a blank PinballX Start to Finish template found here:

 

It is in Word docx format and final submissions should be "printed" to Microsoft PDF for ease of use and limit editability. While others have used the template to cover the basics of setting up everything that was available at the time for the VPin PinballX users, the template is very flexibile and lends itstelf to being used to focus on specific setups for virtual pin configurations. I could see a library of "S2F PinballX" documents with specifics beyond the basic document to include:

- Pinball FX 2 and 3 (Steam and non-Steam)

- Pinball Arcade

- Zaccaria Pinball

- Future Pinball 

- Visual Pinball

- MAME

Additionally, the S2F template could be leveraged for various apps and plugin configuration steps for:

- PinballX Database Manager

- PinballX Statistics Display

- Zaccaria Direct Launch for PBX (could be included in the Zaccaria Pinball perhaps?)

- PinballX Pnemhi Challenge Table Launcher

- etc., etc.

 

Once completed, instead of sending to me or @nullPointer as noted, they can be sent directly to the FAQ section with a dedicated post and attached. I trust you!