joyrider3774 Posted August 21, 2021 Share Posted August 21, 2021 19 hours ago, Mike_da_Spike said: , I uploaded your wheel images as well and adeed your name to it. Now they are easily to access via gamemanager and database manager : Thanks, i was not aware i could append stuff Quote Link to comment Share on other sites More sharing options...
Mike_da_Spike Posted August 22, 2021 Share Posted August 22, 2021 5 hours ago, joyrider3774 said: Try "The" not "the" i will verify my guide and pinballx database Correct tablenames are "Shooting The Rapids" not "Shooting the Rapids" edit: yup my guide had the typo's i correct it, will verify the database tommorow, need some sleep now§ Hide joyrider3774's signature Hide all signatures Creator of Pinball (FX3) Launcher App Paypal if you feel like donating https://www.paypal.me/joyrider3774 that did "The" trick I tried a lot to get it to work, but not the capital T Thanks mate ! Not sure if you saw my question before : Quote Can I do a request for you PinballXlauncher program ?If a key is pressed for navigation (So not launching), can the timer be reset ?Maybe it's because of me, but the menu is too big to navigate trough it (I also have it with FX3 ...) Maybe because I'm getting too old and not too quick anymore Quote Link to comment Share on other sites More sharing options...
joyrider3774 Posted August 22, 2021 Share Posted August 22, 2021 2 hours ago, Mike_da_Spike said: Not sure if you saw my question before : Yes, I saw it, but the timer is actually there as a safety precaution. You see pinballx tries to detect "ZaccariaPinball.exe" running as we have written that inside the settings to be detected but if that process is not detected within a certain time limit Pinballx will return to it's menu's and you'll end up with the launcher still running and being in the menu's or Having zaccaria pinball launch just at the time when pinballx returns to the menu's. The timer was added to prevent this from happening and to make sure zaccaria pinball (or any other game) is launched on time before pinballx would return to its menu's Quote Link to comment Share on other sites More sharing options...
joyrider3774 Posted August 22, 2021 Share Posted August 22, 2021 Uploaded the Zaccaria database to ftp again as well as replaced it in my previous post to fix Shooting The Rapids Quote Link to comment Share on other sites More sharing options...
Draco1962 Posted February 4, 2022 Share Posted February 4, 2022 Now pinned and moved. Lots of good information! Quote Link to comment Share on other sites More sharing options...
pazaman4 Posted July 19, 2022 Share Posted July 19, 2022 interesting information Quote Link to comment Share on other sites More sharing options...
roccodimarco Posted September 20, 2022 Share Posted September 20, 2022 Do you have table names for the postal 2 tables by any chance? Quote Link to comment Share on other sites More sharing options...
Mike_da_Spike Posted September 20, 2022 Share Posted September 20, 2022 3 minutes ago, roccodimarco said: Do you have table names for the postal 2 tables by any chance? You mean these : POSTAL Redux SS POSTAL Redux Deluxe POSTAL Redux Remake POSTAL Redux Retro Quote Link to comment Share on other sites More sharing options...
roccodimarco Posted September 20, 2022 Share Posted September 20, 2022 Not sure if I’m saying this right, so bare with me, but in the past, when I add a new table to my launcher, I go into notebook ++ and add in the new game, for example: <game name="robotdeluxe"> What im trying to find it the new game names (even The Whole xml) for the new postal tables. They just released a new four pack of tables, Postal 2. Quote Link to comment Share on other sites More sharing options...
Mike_da_Spike Posted September 20, 2022 Share Posted September 20, 2022 34 minutes ago, roccodimarco said: Not sure if I’m saying this right, so bare with me, but in the past, when I add a new table to my launcher, I go into notebook ++ and add in the new game, for example: <game name="robotdeluxe"> What im trying to find it the new game names (even The Whole xml) for the new postal tables. They just released a new four pack of tables, Postal 2. Gotcha, didn't check steam yet, and I didn't bought the postal packs, but isn't it just the names that Steam gave on the website ? Zaccaria Pinball - POSTAL 2 Table Pack on Steam (steampowered.com) I should try these names : POSTAL 2 Retro POSTAL 2 SS POSTAL 2 Remake POSTAL 2 Deluxe Quote Link to comment Share on other sites More sharing options...
padps Posted June 26 Share Posted June 26 Hi All, Any update on this topic as I cannot launch Postal Redux, Postal 2 Table Packs and Zombie Invasion from command prompt. Anyone with the Table Names, not Display Names, as for me only using the table name works? examples: works with "aerobatics" for Aerobatics (Magic Pixel 1977), same with "aerobaticsretro" for Retro Version. Thanks Quote Link to comment Share on other sites More sharing options...
Mike_da_Spike Posted June 27 Share Posted June 27 10 hours ago, padps said: Any update on this topic as I cannot launch Postal Redux, Postal 2 Table Packs and Zombie Invasion from command prompt. Not sure what update you expect in this post. all is working from command prompt 10 hours ago, padps said: Anyone with the Table Names, not Display Names, as for me only using the table name works? examples: works with "aerobatics" for Aerobatics (Magic Pixel 1977), same with "aerobaticsretro" for Retro Version. Thanks Tables names should be defined as noted in the following post : https://steamcommunity.com/sharedfiles/filedetails/?id=2545556227 The table name "aerobaticsretro" is incorrect; the correct usage is "Aerobatics Retro." If an incorrect table name is initiated, the screen will go black (loading Zaccaria) and directly closes itself, similar to the behavior when accessing a table you do not own. I have installed Zaccaria this morning on my test system, configured it swiftly, and everything was functioning properly. also from command line and from PinballX Make sure you have the latest version of Zaccaria from Steam as well and check if all The DLC's are installed To check the DLC's installed. click on the gear icon (1) in Steam and select properties(2) click on the DLC (3) tab and check if all the DLC you purchased are checked (4) Scroll (5) when needed Launching Zaccaria and you will see "Buy it now" will not do a direct launch Tables without the "buy it now" do a direct table launch I hope this help 1 Quote Link to comment Share on other sites More sharing options...
padps Posted June 27 Share Posted June 27 Can you please share your PinballX Zaccaria.xml? So I can use your database setup instead of manually change them all. Mostly appreciated. Quote Link to comment Share on other sites More sharing options...
Mike_da_Spike Posted June 27 Share Posted June 27 It's disappointing. I dedicated two hours to testing, installing, taking screenshots, and typing a post with all the necessary information because you mentioned it wasn't working. Yet, you request the XML, which had already ben posted. Nevertheless, being the nice person that I am (no comments, @scutters ), I've included it here once more. Zaccaria.xml Quote Link to comment Share on other sites More sharing options...
Draco1962 Posted June 27 Share Posted June 27 4 minutes ago, Mike_da_Spike said: It's disappointing. I dedicated two hours to testing, installing, taking screenshots, and typing a post with all the necessary information because you mentioned it wasn't working. Yet, you request the XML, which had already ben posted. Nevertheless, being the nice person that I am (no comments, @scutters ), I've included it here once more. Zaccaria.xml 74.75 kB · 0 downloads Has this been updated in the FTP? I found several with older dates on the FTP site under: /-PinballX-/Databases/Zaccaria /-PinballX-/Other Uploads/Joyrider3774/Zaccaria Pinball/Database/Zaccaria Pinball /-PinballX-/Other Uploads/Joyrider3774/Zaccaria Pinball official filenames/Database I think overwriting the one in /-PinballX-/Databases/Zaccaria would probably be best as a neutral reference going forward, but just a suggestion for the supporting folks for this endeavor. Quote Link to comment Share on other sites More sharing options...
Mike_da_Spike Posted June 27 Share Posted June 27 I still use joyriders his xml. I never bought the later tables, so mine is from2021 as well. Maybe a good idea to add a sub category with xmls for systems @Draco1962(as you mentioned before)? Quote Link to comment Share on other sites More sharing options...
Draco1962 Posted June 27 Share Posted June 27 /-PinballX-/Databases/Zaccaria would be a good default location then. That said, it is probably a good idea for @padpsand others to learn how to modify their xml data files via Notepad++ or other text editing apps so they can initiate their own triage for launching and media naming issues. This is essential. Quote Link to comment Share on other sites More sharing options...
Mike_da_Spike Posted June 27 Share Posted June 27 Thanks @Draco1962! Really appreciate it i will look tomorrow to ftp and if there are missing xmls, I will add them as wel Scutters and I have it on our 'future' list to add it into DBM as well, but it's hard to create the list dynamically. So it must be static , and as we are IT folks (read 'lazy people') we don't want to update a list every time. And it's been on our list for a couple of years already Quote Link to comment Share on other sites More sharing options...
padps Posted June 27 Share Posted June 27 2 hours ago, Mike_da_Spike said: It's disappointing. I dedicated two hours to testing, installing, taking screenshots, and typing a post with all the necessary information because you mentioned it wasn't working. Yet, you request the XML, which had already ben posted. Nevertheless, being the nice person that I am (no comments, @scutters ), I've included it here once more. Zaccaria.xml 74.75 kB · 0 downloads Thanks for the support and clear guidelines. Tried several self-made xml's and then all found here but nothing worked. Even tried several Settings Command lines. I figured that my issue is, for whatever reason my game is not updating to latest version, stuck in 2021 and there is a newer version... Will uninstall Steam and reinstall all again. Thanks again.... Quote Link to comment Share on other sites More sharing options...
Mike_da_Spike Posted June 28 Share Posted June 28 12 hours ago, padps said: Thanks for the support and clear guidelines. Tried several self-made xml's and then all found here but nothing worked. Even tried several Settings Command lines. I figured that my issue is, for whatever reason my game is not updating to latest version, stuck in 2021 and there is a newer version... Will uninstall Steam and reinstall all again. Thanks again.... I think it is not updated after 2021 anymore,but not sure. Start indeed with command line. If that is working, you can add it to pinballx. Joyrider made a good tutorial with all the command line parameters, so must work ! Quote Link to comment Share on other sites More sharing options...
AndyMcDandy Posted June 29 Author Share Posted June 29 Magic Pixel has, for the most part, abandoned the PC version to focus on the partnership with AtGames where they supply the Zaccaria tables, history collection tables and other custom-made tables. 1 Quote Link to comment Share on other sites More sharing options...
padps Posted Friday at 12:18 AM Share Posted Friday at 12:18 AM For those wanting a working PBX config away from Steam use: Using table Names from the great tutorial: https://steamcommunity.com/sharedfiles/filedetails/?id=2545556227 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.