hlr53 Posted July 26, 2018 Share Posted July 26, 2018 Building a new cab and working on software for it. Question: In the wheel menu the table images (I do not want videos this time around) are all rotated 90 deg to the right. How do I fix this? AND WHY IN THE WORLD ARE THEY DEFAULTED TO THIS ROTATION??? EDIT: I am going to NUKE PBX and uninstall with Revo Uninstaller (removes all remnants of registry items) and reinstall to fix the stuck loading problem. log.txt PinballX.ini Link to comment Share on other sites More sharing options...
tthurman Posted July 27, 2018 Share Posted July 27, 2018 Please let us know if aa fresh install. Thanks Link to comment Share on other sites More sharing options...
hlr53 Posted July 27, 2018 Author Share Posted July 27, 2018 Fresh install (32 bit forced) and the table images are rotated to the right. I thought in the past you could set Display to no rotation? That option is gone. Now, when I load Future Pinball via FPloader the table is not displaying in the playfield. Works perfectly outside PBX. when I launch direct. I have FP set up in Settings the way I always did using TerryRed's 2016 directions in the FAQ here. Am is missing something else obvious? Hate setting up new systems. Giving my old cab to my son. PinballX.ini log.txt Link to comment Share on other sites More sharing options...
Draco1962 Posted July 27, 2018 Share Posted July 27, 2018 Open your pinballx.ini [Display] Monitor=0 rotate=90 Change it to rotate=0 then save and relaunch. EDIT: Installed forced 32-bit and rotate settings show in Setup Wizard: 1 Link to comment Share on other sites More sharing options...
hlr53 Posted July 27, 2018 Author Share Posted July 27, 2018 I tried both earlier and no change. Still rotated to the right. It started doing this with version 3. Link to comment Share on other sites More sharing options...
Draco1962 Posted July 27, 2018 Share Posted July 27, 2018 2 hours ago, hlr53 said: I tried both earlier and no change. Still rotated to the right. It started doing this with version 3. Did you try it before you attached your pinballx.ini? Also, you said that you did not see where you could set rotation. Were you able to find it now with my instruction? Have you tried copying your pinballx.ini from your other system and tweaking the settings to match the new one? Link to comment Share on other sites More sharing options...
hlr53 Posted July 27, 2018 Author Share Posted July 27, 2018 Correct and I set to horizontal in Settings. Just to double check I pulled up an FP image outside PBX. I dunno? PinballX.ini Link to comment Share on other sites More sharing options...
hlr53 Posted July 27, 2018 Author Share Posted July 27, 2018 This is how they are coming up on my portrait TV monitor. Sorry so small I resized the print screen. Link to comment Share on other sites More sharing options...
Draco1962 Posted July 27, 2018 Share Posted July 27, 2018 In your nvidia settings fir your playfield, do you have your monitor set to 1080x1920? I had a quite a few issues getting my display issues sorted between Windows 10 updates and v3.x changes, although I believe Win 10 to be the true culprit. Link to comment Share on other sites More sharing options...
hlr53 Posted July 27, 2018 Author Share Posted July 27, 2018 Yep, it is all set ok. What is interesting is the table videos for VP and FP all display correctly. It is the images that are rotated. Maybe Tom can take a look? Link to comment Share on other sites More sharing options...
BrandonLaw Posted July 31, 2018 Share Posted July 31, 2018 This was the case for me. I was almost FORCED to run this (pic) setup as it was becoming too many changes to PBX to get it to maneuver between systems. Windows is what speaks to the program. If you use Teamviewer to edit your cab, this is the only downfall I see in going this route as my 'main' display is ultra tall and I scroll constantly. Link to comment Share on other sites More sharing options...
Draco1962 Posted July 31, 2018 Share Posted July 31, 2018 On 7/27/2018 at 7:40 PM, hlr53 said: Yep, it is all set ok. What is interesting is the table videos for VP and FP all display correctly. It is the images that are rotated. Maybe Tom can take a look? @hlr53 - Just for gits and shiggles can you provide a screen capture of your Windows Display settings directly from your pincab (not via TeamViewer or other remote app)? Orientation for the playfield should be set to Portrait. Link to comment Share on other sites More sharing options...
hlr53 Posted July 31, 2018 Author Share Posted July 31, 2018 Sure thing Done from the cab. I can log into the cab via Windows Remote Desktop Protocol because it has Windows 10 Pro installed. You cannot adjust the displays remotely via RDP. I guess I could make attract videos for my Future Pinball tables. The videos in attract mode have lust their luster for me after 2 years - LOL. Bigly FUN when I started out but they get old after awhile. Link to comment Share on other sites More sharing options...
Draco1962 Posted July 31, 2018 Share Posted July 31, 2018 Have you tried dragging the backglass monitor resting atop the playfield monitor? Link to comment Share on other sites More sharing options...
hlr53 Posted July 31, 2018 Author Share Posted July 31, 2018 No, didn't know you could do that. I just shut down for the evening. Wife and I have some DVR stuff to watch. Can try tomorrow after work. Link to comment Share on other sites More sharing options...
Draco1962 Posted August 1, 2018 Share Posted August 1, 2018 I actually had to do that to fix my problem. Link to comment Share on other sites More sharing options...
Tom Speirs Posted August 6, 2018 Share Posted August 6, 2018 Pinballx requires images that are rotated. Looks like they are not. It goes back to Hyperpin and keeping compatibility. Link to comment Share on other sites More sharing options...
Recommended Posts