Mayhem

Still a hell of a lot of work to do on it though ...

erm it is possible but doesn't work properly. i have game ex still showing on the bottom screen now but it does not work. as in you cannot do much with it. it shows games ex on the bottom screen and game on main screen but its just for looks that all. I need to get around to working on it again but been to bissy lately. What i what to see is game ex having the ability to span across two screen with the ability to have the menus on my lower screen and the videos and pics and info on the top screen. Now i figured out a way of making my own customised set up and not having it full screen but stretched across both screen's but again its not perfect and needs work or coding that i cannot do..

I have touch screen but its only a 67.5" version and no good for game ex. What i need is to be able to split game ex or extend it across two screen with the menu on the bottom half and the info on the top half ...

Ive done some some xml's for trackball and spinner and 48 way joystick games http://homepage.ntlworld.com/sylvia.rungie...l/exconfigs.zip hope this are oky

the Cp comes off in 30 seconds . 2 screws to undo and 2 cables that is it. I would say by the times its complete if it just had a PC inside it would weigh the same if less than a normal cab. All so it is easy to move around due to it having wheels 2 x underneath. The back box once complete all so lifts off after releasing a few screws. So in essence this cab can be stripped down and built back fast. But what's the point of that, its not as if you going to be taking it round a mates house every day !!!!! lol

thks ill not get ill then.

First we start with karaoke .. Sun fly disks playing -> Then we have Album Player with Mini Lyric's running on main screen and Album Player o the touch screen. Then we have Mame running ... And then kids testing out the system ... I've still not finished the back box due to money limitations and having to get new hardware. I will do that later on when i can afford to buy the electronics that i need to fit. Im all so going to work up a 2 player none Touch screen CP without the keyboard just to show how you can change the system to your own needs of the system. This will be 2 x thinner than the current cp. All so i can show how it only takes 1 min to swap out the control panels. The possibilities are endless to what i can do to this frame work.. But the question would be "Would you have one of these in your home ?"

No one knows about this then ........

i dont what to say to much but i have figured a way to use auto rotate but this is for another project. Im holding my cards near my chest for the moment. The only thing we cannot do is rotate any thing above a 42" due to sheer size. but yes its possible and yes its possible on this frame. up to 42" I would put my hand on my hart and say this is the most configurable cab to date companied to old style cabs. A lot of work has gone into being able and having the ability to do nearly every thing. But like every thing else in this world there is room for improvement.

You can see the shelf will hold a full pc with out any problems. This is fully retractable so it has easy access to the pc no messing around ... It will take a full size keybord and still enough room for the mouse as well. has a 15 degrees tilt system so the TV can be tilted and can hold up to a 60" plasma screen

Im running it on a quad core q6600 oced to 3.6 ghz with 8800 GT and 6 gb ram and it runs fine. Allso tested on a e5200 oced to 3.6 Ghz and runs fine on that.

Does the plugin have support for logitech G15 lcd keyboard before i buy it.

No there has been some major developments over here one of the being ive been contacted by a arcade developer that's coming to my home this weekend and all so im going to see there factory. !!!! Sort of i have to get as much working asap so im rushing to at least get it showcased Problem is its going to be near imposable to do it all. there is a window for the side but its not pictured here cos its no ware near finished. Pic below of back box

This is called rushing to meet demands !!!!!!! No back box fitted just yet nothing i can do to get that ready in time ... 32" Samsung TV fitted 1/2 complete assembly ... Blew Up PC while rushing around and dropped screw driver on a live mother board haha. Not a problem though stolen one of the kids for the moment. Cables from TV to System hidden for now with twist ties later on this will be done with plastic square tubing. At least you get the idea were its heading ....

yeh joe when doing over a few games that's fine but when hammering out over 1000+ is a total micky take. Fraps isnt that good.

ah right cool. was wondering there is a small problem with tack ball lighting and the ipac. on the menus you only allow for pac drive to do mono yet when used in conjunction with U-track and the RGB lighting for U-track and the pac drive the 1 player track ball only allows for 1 light set to it. we need a option were u say have trackball 1a / 1b / 1c so we can set the RGB lighting up properly to the single trackball under the pac drive. atm i have to use player 1 2 and 3 each with 1 led assigned to them to give me the RGB effect under the track ball 1 player. Its not perfect but it does work. sorry if acting like a thorn in you side but im trying to get the most out of game ex and all the plug ins i can and completely utilise what game ex can realy do. I have my arcade system up on a major modding community and every ones loving what it can do yet all the effects are down to your plug ins and Game ex it self oh and tempest as well.....

waite of money for lcd / plasma screens. better off spending you money on a decent gaming card instead.

cp wizard already works on second monitor at the start of the game and through pause as well as from the Game ex menu .... !!!! Wish it would work with the led / lcd software as well showing each button lit and track ball lit up lol ...

yeh your right. when i first set up i set it correctly. the problem was i lost my hard drives and had to by new ones and moved name to another place. Its now fully working. Funny how you miss the small things. thks for the heads up.

first thing ive noticed is the before under name it listed my games under the profile editor. it hasn't done it this time ...

Yeh will do thks for this ...

Yeh it is i cannot get it to work properly - you can see in the vid below its working to music ect ect but not the cp. Ive done some thing wrong can u take a pic and show me how yours is setup by any chance ...

When i used to run game ex on my old system i got it to Flash and talk the buttons when you clicked on each game in mame and selected control panel view. How ever i cannot seem to get it to work. What are the basic setting with in the LCD/LED plugin that allows this to work now ...

Working on cab etchings now as i type this (just having a rest) These are quite close up so it looks a little wobbly but then again i haven\\\'t cleaned it up yet neither. ........ 15 min later lol ------- Oky first alien finished on the CP ... Need to do more work but you\\\'ll get the jist of what im up to ... The alien is approx 2\\\" in hight and 3.5\\\" in length so as you can see its really quite small but i think there is a lot of detail in it for such a small picture. Took about 1/2 to create My lighting is rubbish atm , but to give you a idea with some bad red cold cathode tubes here you. they don\\\'t relay give it enough effect and it took 50 pics before i got a few to look oky ... Ill be getting some much strong Leds later on to test it out better. this shot came out really wired but looks unreal ...

Yeh i think through UK day time its fine but on the night time it went a bit dogy .. still a fun little game all though im getting my ass kicked left right and centre lol ...