Jump to content

All my products and services are free. All my costs are met by donations I receive from my users. If you enjoy using any of my products, please donate to support me. Thank you for your support. Tom Speirs

Patreon

GameEx NetPlay - Client/Server MAME/Mess


Recommended Posts

OK - I am confuzzled. Previously I was not able to participate in Netplay. Now, I am! I haven't made any recent changes (other than upgrading the ClientServerMAME app). No changes to previous port forwarding setting or previously setup exclusions in Norton. I have to say that it is pretty frickin' awesome! Just played a short round of Gigawing with chrisqc and was flawless on my end as player 2. I have to agree with him about a general user guide for this. Maybe I will scour DG's blog to see if I can piece some basics together along with the info from this thread. This would be GameEx facing.

Link to comment
Share on other sites

  • Replies 232
  • Created
  • Last Reply

Top Posters In This Topic

i don't want to annoy annybody here but is this a gameex feature ? or a mame feature ? i know its a mame derived stuff but the way gameex temper with it is not the same way than with the command line ... so that part (at least) should be explain better ..see all the emulation world now know that this cs exist but whats the point if its too complikated to use ? see somewhere i read that you need a mame.ini... and now you don't need it annymore. again i don't want to annoy anybody i can help built that guide and you may correct it later

Link to comment
Share on other sites

i don't want to annoy annybody here but is this a gameex feature ? or a mame feature ? i know its a mame derived stuff but the way gameex temper with it is not the same way than with the command line ... so that part (at least) should be explain better ..see all the emulation world now know that this cs exist but whats the point if its too complikated to use ? see somewhere i read that you need a mame.ini... and now you don't need it annymore. again i don't want to annoy anybody i can help built that guide and you may correct it later

I think it is safe to say that it is not needed if it is being run through GameEx. GameEx will handle the UPnP updating of the firewall in most cases (in some, may require additional tweaking of port forwarding if it doesn't or adding exceptions to anti-malware software - unfortunately, those tweaks cannot all be documented because of the many different combinations of routers, firewalls, anti-malware software, so this will require a certain amount of diligence of the end-user to become better acquainted with these segments of their setups.

The Mame.ini -cs apparently is only required if you are using a MAME build outside of GameEx.

Link to comment
Share on other sites

I think it is safe to say that it is not needed if it is being run through GameEx. GameEx will handle the UPnP updating of the firewall in most cases (in some, may require additional tweaking of port forwarding if it doesn't or adding exceptions to anti-malware software - unfortunately, those tweaks cannot all be documented because of the many different combinations of routers, firewalls, anti-malware software, so this will require a certain amount of diligence of the end-user to become better acquainted with these segments of their setups.

The Mame.ini -cs apparently is only required if you are using a MAME build outside of GameEx.

ok thanks now i understand better i will still work on some guide for gameex use and submit it ,about the gigawing game the ping was 115 ms here no lag at all in either control or main game ,it was a perfect test

Link to comment
Share on other sites

ok thanks now i understand better i will still work on some guide for gameex use and submit it ,about the gigawing game the ping was 115 ms here no lag at all in either control or main game ,it was a perfect test

I was showing 113-121 ms and experienced no lag at all.

Link to comment
Share on other sites

i don't want to annoy annybody here but is this a gameex feature ? or a mame feature ? i know its a mame derived stuff but the way gameex temper with it is not the same way than with the command line ... so that part (at least) should be explain better ..see all the emulation world now know that this cs exist but whats the point if its too complikated to use ? see somewhere i read that you need a mame.ini... and now you don't need it annymore. again i don't want to annoy anybody i can help built that guide and you may correct it later

Your not annoying anyone :) As Draco says GameEx tries to take the work out of it where possible rather than add to it. Router and firewall setup is really beyond the scope but you shouldnt have to worry about setting up cs mame itself other than downloading and setting the paths.

Link to comment
Share on other sites

Your not annoying anyone :) As Draco says GameEx tries to take the work out of it where possible rather than add to it. Router and firewall setup is really beyond the scope but you shouldnt have to worry about setting up cs mame itself other than downloading and setting the paths.

One point to note though is if you run GameEx as admin and do a netplay once GameEx WILL configure windows firewall for you.

If you have uPnP setup on your router, GameEx will also create the port mapping.

So really it tries to take the work out of it.

Link to comment
Share on other sites

OK nice to see all this... I'll try and run it without the mame.ini and see if I have any more luck with it. So far I've only seen Draco once and bobross once... maybe more people will start using it.

What would be rad is if we were sending a notification popup to users that a game has been located/started that makes a sound if the cab is in attract mode. I bought a new switch to wire the game room and this would be a great way to utilize it!

Link to comment
Share on other sites

OK nice to see all this... I'll try and run it without the mame.ini and see if I have any more luck with it. So far I've only seen Draco once and bobross once... maybe more people will start using it.

What would be rad is if we were sending a notification popup to users that a game has been located/started that makes a sound if the cab is in attract mode. I bought a new switch to wire the game room and this would be a great way to utilize it!

Feature request?

Link to comment
Share on other sites

The video is great! Funny thing is the WWF music ic too loud to hear what he's tweaking to make it run. Is this step needed for a bunch of games or just the occasional crazy one?

.:EDIT:. Ahh, so I hooked onto someone, may cab asked me if we would like to play a game, the CP came up, I waited, then the host disappeared and the list said "No Games Found". So... Who's end is the problem on? Anyone know?

Also, if I hook up to someone, and it just falls back to the game list with that game removed, does that mean the host didn't accept my invite? Is this normal GameEx behaviour?

Link to comment
Share on other sites

The video is great! Funny thing is the WWF music ic too loud to hear what he's tweaking to make it run. Is this step needed for a bunch of games or just the occasional crazy one?

.:EDIT:. Ahh, so I hooked onto someone, may cab asked me if we would like to play a game, the CP came up, I waited, then the host disappeared and the list said "No Games Found". So... Who's end is the problem on? Anyone know?

Also, if I hook up to someone, and it just falls back to the game list with that game removed, does that mean the host didn't accept my invite? Is this normal GameEx behaviour?

it was me dude ...are you using the latest client/server ? the latest version is 0.7c get that and it will probably work

Link to comment
Share on other sites

it was me dude ...are you using the latest client/server ? the latest version is 0.7c get that and it will probably work

sorry after 3 shot i was pissed off and did not reply anymore lol update your client/server to 0.7c and we will test again

also check if your 5805 port is open on both router and windows firewall or else it won't ever work

Link to comment
Share on other sites

My ports are open and listening. My router shows the port as open too. I ping'd it and evenchecked it on a port checking web site. All is well as far as that goes. I also have the latest version. I fear that this has something to do with my inability to generate a config file.

Do our command line options need to be the same? I see mine runs the same switches as my MAME build does.

Link to comment
Share on other sites

My ports are open and listening. My router shows the port as open too. I ping'd it and evenchecked it on a port checking web site. All is well as far as that goes. I also have the latest version. I fear that this has something to do with my inability to generate a config file.

Do our command line options need to be the same? I see mine runs the same switches as my MAME build does.

some say that you don't need a config file

Link to comment
Share on other sites

some say that you don't need a config file

last test didn't work too ... wich windows are you using ? if its vista or seven try to make your mame.ini

open a command prompt "in administrator mode" and your file should be created using the command vmame.exe -cc

Link to comment
Share on other sites

Ahh hell... I give up. I just can't get this to work. Maybe I should turn off uTorrent...

3. Enable Client/Server MAME in the "SETUP WIZARD" under "custom" option. then make sure your path and exe are correct in the "Advance MAME" setup in Advanced Config.

5. To start serving a game make sure you have port 5805 UDP allowed on your ROUTER and Windows Firewall or use upnp ( vista and windows 7 run GameEx in Admin mode one time so it will configure windows firewall all by itself )

6. once in GameEx select "MAME" from the main menu you should now see a new option "MAME NetPlay" this is the list of hosted online game that you can connect to as a Client

7. to Host a game choose "All MAME Games", select a game from the list, then in the Game Info screen select "Request NetPlay".

Link to comment
Share on other sites

It's XP... I have a port open and working on uTorrent too so I don't see why I can't get this one to open. I have to be doing something wrong here... It's not like I'm a networking noob, but this is just frustrating.

I'll try one more thing quick before I say screw it entirely. If Tom has uPNP working (which he does), even without the firewall exception it should be working fine. Damn!!!

uPNP on in router, port forwarded... I'm running out of things to try.

Link to comment
Share on other sites

I wonder if I can launch a game through the command line even using this exe? Hmm...

.:EDIT:. I can't even run games from it. I get a memory access violation. WTF...

Link to comment
Share on other sites

I wonder if I can launch a game through the command line even using this exe? Hmm...

.:EDIT:. I can't even run games from it. I get a memory access violation. WTF...

thats propably why it does not work

direcX update maybe or try to reinstall vmame or...a fresh format ?

Link to comment
Share on other sites

I wonder if I can launch a game through the command line even using this exe? Hmm...

.:EDIT:. I can't even run games from it. I get a memory access violation. WTF...

That would definitely explain it! now to figure out why it does that for you. :(

Link to comment
Share on other sites

What could be in there that the EXE is coded for but can't find? If I understand anything about coding, a MAV violation only happens when your porgram calls for something that isn't there. If that were the case, everyone would be having the same problem. I would worry more if this was happening to other proggys as well... It's gotta have something to do with the inability to write the config file... Or my chipset... Damn, I don't want to have to reinstall my OS and start GameEx over yet again...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...