Future Pinball script

[PcTeknic]

Thanks, tomorrow i can test

[Mike_da_Spike]

Good one @scutters!

Didn't think of that.

You can check in the log.txt file what parameter pbx give to your batch file

[PcTeknic]

Anithing Open with [TABLEFILEWOEXT] parameter

Attach .ini, log, and bats

LaunchAfter.bat LaunchBefore.bat PinballX.ini log.txt

[scutters]

Ahh, sorry.. settings for launch before in ini file might need to be;

LaunchBeforeParameters="[TABLEFILEWOEXT]"

 

[PcTeknic]

Yes, i set to this in ini and dont work

[FuturePinball]
Enabled=True
WorkingPath=C:\Future Pinball\BAM
TablePath=C:\Future Pinball\Tables
Executable=FPLoader.exe
Parameters=/open "[TABLEPATH]\[TABLEFILE]" /play /exit /arcaderender /STAYINRAM
LaunchBeforeEnabled=True
LaunchBeforeWorkingPath=C:\Future Pinball\Scripts
LaunchBeforeExecutable=LaunchBefore.bat
LaunchBeforeHideWindow=True
LaunchBeforeWaitForExit=False
LaunchAfterEnabled=True
LaunchAfterWorkingPath=C:\Future Pinball\Scripts
LaunchAfterExecutable=LaunchAfter.bat
LaunchAfterHideWindow=False
LaunchAfterWaitForExit=False
MouseClickFocus=True
FPRAMPath=C:\Future Pinball\fpRAM
LaunchBeforeParameters=[TABLEFILEWOEXT]

 

[PcTeknic]

if a script type tablefile name works, no problem, like this but correct commands:

if tablefile="Avatar" start "FutureDMD.exe"

Each table with dmd the same line

if tablefile="Ali" start "image_Monitor_View.exe" 2 "C:\PinballX\Media\Future Pinball\DMD Images\Ali.png"

One script based on DMD Video is better, don´t need a lot of command lines and don´t need modify if you add one table, but if not works, one script based on tablename is valid (if work)

[scutters]

2 hours ago, PcTeknic said:

Yes, i set to this in ini and dont work

[FuturePinball]
Enabled=True
WorkingPath=C:\Future Pinball\BAM
TablePath=C:\Future Pinball\Tables
Executable=FPLoader.exe
Parameters=/open "[TABLEPATH]\[TABLEFILE]" /play /exit /arcaderender /STAYINRAM
LaunchBeforeEnabled=True
LaunchBeforeWorkingPath=C:\Future Pinball\Scripts
LaunchBeforeExecutable=LaunchBefore.bat
LaunchBeforeHideWindow=True
LaunchBeforeWaitForExit=False
LaunchAfterEnabled=True
LaunchAfterWorkingPath=C:\Future Pinball\Scripts
LaunchAfterExecutable=LaunchAfter.bat
LaunchAfterHideWindow=False
LaunchAfterWaitForExit=False
MouseClickFocus=True
FPRAMPath=C:\Future Pinball\fpRAM
LaunchBeforeParameters=[TABLEFILEWOEXT]

 

I meant with the quotes around it,

LaunchBeforeParameters="[TABLEFILEWOEXT]"

[PcTeknic]

GREAT!!!!! Now work!!!!!!!!

LaunchBeforeParameters="[TABLEFILEWOEXT]"

Comandline for Image_Monitor needs modifi to:

cmd /c ("C:\Future Pinball\Scripts\Image_Monitor_View.exe" 2 "C:\PinballX\Media\Future Pinball\DMD Images\%strCheck%.png")

Attach final files

A lot of thanks to Mike and Scutters

Today is a great day, Future Pinball its alive!!!

Image_Monitor_View.exe LaunchAfter.bat LaunchBefore.bat

[Mike_da_Spike]

nice one ! Good job !

For some reasons fp isn't working on my cab correctly, thats why I skipped it

[PcTeknic]

With New BAM and new SLAMT1LT and Terry Red Tables It is the first time in many years that I have seen it work decently.

Last Week y only have 10 Future Pinball Tables, now arround 75, I add new tables and no DMD tables

[Mike_da_Spike]

Well... I will try again. When all setting to full screen, it became very slow. And have a pretty decent system ( not according to @scutters)

[PcTeknic]

80% of all old Future Pinball tables are very slow, the ball go to bad directivos, etc

The best place for old Future Pinball is the recicle bin.

I only don't unnistall for Gremlins and other 10 tables that no have in Visual Pinball.

Your PC work fine, its Old Future that not work.

New Slamt1lt and Terry Red tables made for BAM 2.5 and physics 2.7 is different, 80% better.

This new tables and new soft are at 30% of possibilities of Visual Pinball, old tables only at 1%

Now Future Pinball, as a Game, can be rated with 6 points over 10, before 2 or 3 points 

[Mike_da_Spike]

Ok.  Well. Tested it indeed with old tables (i thought knight rider) and in full screen it took ages before something happend. Running non fs worked.

I will give it a change in a few week. Holiday starts in september for me, and I have a lot to do on arcade and pinball cabinet !

[PcTeknic]

Knight Rider is an old table, i have it. Dont have upgrades with new BAM, when table make updated for new BAM yes, now no.

You need install and update BAM 2.5 the installer is 2 in 1, BAM and Future Pinball.

You need configure Future Pinball fine.

You need launch tables with FPLoader.

View the Terry Red Guide for setup and files for update after install.

[Mike_da_Spike]

I did all that stuff, but properly with old tables. I will check wit a terry red table

[PcTeknic]

https://speak1970.wixsite.com/slamspinballemporium

New Slamt1lt tables