smithsa3 Posted July 2, 2020 Share Posted July 2, 2020 I have pinball cabinet and running Visual Pinball v. 10 to run the .VPX tables downloaded from VPDB. My cabinet presently runs VP9 tables with B2S for back glass and these all work okay. This would work well on widescreen TV. Table shown in perspective, DMD to the left and general background image. However, I want to rotate the screen 270 degrees and run full screen, not perspective view. All of the tables I have downloaded from VPDB have the same default view. I have messed around trying to change mode from Desktop but this has made no difference. Is there an easy way to change the settings to run in cabinet mode ? Thanks. Link to comment Share on other sites More sharing options...
Mike_da_Spike Posted July 2, 2020 Share Posted July 2, 2020 If you have want to run visual pinball in full screen mode, you need to setup your monitor in landscape mode. And in visual pinball (video settings) you need to select FS mode ( just under the resolution select box) Hope this helps Link to comment Share on other sites More sharing options...
scutters Posted July 3, 2020 Share Posted July 3, 2020 22 hours ago, smithsa3 said: However, I want to rotate the screen 270 degrees and run full screen, not perspective view You may also need to adjust XY Rotation for the tables (set to 270 or 0 depending on you setup). Have a look at the first couple of BorgDogs posts here; http://vpuniverse.com/forums/topic/2989-newbie-needing-help/ Link to comment Share on other sites More sharing options...
Recommended Posts