Jump to content

All my products and services are free. All my costs are met by donations I receive from my users. If you enjoy using any of my products, please donate to support me. Thank you for your support. Tom Speirs

Patreon

3 screen problem


Speeddemon1

Recommended Posts

Hi, i have a pinball with 3 screens , THE playfield is a 42 inch backglass 23 inch and THE screen for dmd 19 inch 

now THE problem ,playfield is playing good no issues backglass Some tables good and Some tables to small 

the dmd is way to big full screen and a little bit in THE playfield 

how can i get this working good  , i have try THE y and x  but dont no what that do or means 

 

 

Link to comment
Share on other sites

It's the \pinballx\log\log.txt and \pinballx\config\pinballx.ini files that should be attached.

If you want to change the size of the DMD and backglass areas it's the width and height you should change, and then position that area using the x and y

Link to comment
Share on other sites

Hi , THE problem was that iTS to big in pinballx ,but not in ddraw , i sloved it i think ,

with setdmd i pickt iT up THE dmd test screen and put iT in THE right screen with THE good resolution 

and save iT to all my roms ,and in pinballx i have THE same resolution ,when i select a game 

IT goes  first to THE wrong screen and i most Press F1 and i select anthor dmd Dll demension  

And  now iT stays in place even when i turn THE pc off ,i most do this with all my tables (selecting Dll dmd) 

so THE problem is sloved ,now all my software is good and running finnaly B)

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...