Speeddemon1 Posted May 28, 2020 Share Posted May 28, 2020 Hi, i have a pinball with 3 screens , THE playfield is a 42 inch backglass 23 inch and THE screen for dmd 19 inch now THE problem ,playfield is playing good no issues backglass Some tables good and Some tables to small the dmd is way to big full screen and a little bit in THE playfield how can i get this working good , i have try THE y and x but dont no what that do or means Link to comment Share on other sites More sharing options...
Draco1962 Posted May 28, 2020 Share Posted May 28, 2020 When reporting an issue or requesting assistance, please attach copies of your pinballx.ini and log.txt files. Thanks. Link to comment Share on other sites More sharing options...
Speeddemon1 Posted May 28, 2020 Author Share Posted May 28, 2020 Hi ,Oke is that THE pinballx setup copie or somthing else Link to comment Share on other sites More sharing options...
scutters Posted May 28, 2020 Share Posted May 28, 2020 It's the \pinballx\log\log.txt and \pinballx\config\pinballx.ini files that should be attached. If you want to change the size of the DMD and backglass areas it's the width and height you should change, and then position that area using the x and y Link to comment Share on other sites More sharing options...
Speeddemon1 Posted May 28, 2020 Author Share Posted May 28, 2020 Oke Thanks i Will look in to that Tomorrow Link to comment Share on other sites More sharing options...
Speeddemon1 Posted May 29, 2020 Author Share Posted May 29, 2020 hi guys i have try THE to get THE log but dont no how but i have THE vpx working with 3 screen dmd but THE vpt tables is THE dmd to big its over almost 2 screens , how do i get this dmd work good Link to comment Share on other sites More sharing options...
scutters Posted May 30, 2020 Share Posted May 30, 2020 Sorry, i'm not sure what you mean. Is the DMD area too big while playing a game (vpx and vpt?), or is it the wrong size in pinballx? Link to comment Share on other sites More sharing options...
Speeddemon1 Posted May 30, 2020 Author Share Posted May 30, 2020 Hi , THE problem was that iTS to big in pinballx ,but not in ddraw , i sloved it i think , with setdmd i pickt iT up THE dmd test screen and put iT in THE right screen with THE good resolution and save iT to all my roms ,and in pinballx i have THE same resolution ,when i select a game IT goes first to THE wrong screen and i most Press F1 and i select anthor dmd Dll demension And now iT stays in place even when i turn THE pc off ,i most do this with all my tables (selecting Dll dmd) so THE problem is sloved ,now all my software is good and running finnaly Link to comment Share on other sites More sharing options...
Recommended Posts