Jump to content

All my products and services are free. All my costs are met by donations I receive from my users. If you enjoy using any of my products, please donate to support me. Thank you for your support. Tom Speirs

Patreon

PinballX Enhancements/Features Requests


Recommended Posts

55 minutes ago, Tom Speirs said:

It just draws it to fit the size of the display. So you can simply make the image smaller to stretch it,

That would be perfect for me! Just make a 1080x1920 image with transparency where you want to see the table image / video.

You might need a check box to turn this feature on / off because of the backward compatibilty. Default = Off (old style squeezed)

Link to comment
Share on other sites

On 7/14/2020 at 11:46 AM, Schreibi34 said:

That would be perfect for me! Just make a 1080x1920 image with transparency where you want to see the table image / video.

You might need a check box to turn this feature on / off because of the backward compatibilty. Default = Off (old style squeezed)

Yes will do. Hopefully for the next release.

  • Like 2
Link to comment
Share on other sites

  • 2 weeks later...

Default Filters and Custom Databases separte for each System.

I think when we load a default filter, Stern Tables, Gottlieb Tables, 80's Tablets, etc.

PinballX should generate the results only on the system we are on.

Instead, it shows the Stern Tables or 90's tables of all the systems.

I think you should only do that if we are in view of all the tables.

If we are in a specific system, you should apply the filters to that system.

Similarly, Custom Databases should only be seen on the selected system.

For example in my case, if I am in Visual Pinball, when I go to listings, it should show the default filters plus the custom databases that I have in that system, Spanish Pinball, VPOriginal, Sega / Data East, etc, because I have created those databases in Visual Pinball.

And when I'm in Pinball FX3 I should do the same, showing the default filters plus the custom databases of that system, such as Marvel, Star Wars, etc.

Currently I only put custom databases for Visual Pinball because you are on the system you are on, all custom databases on all systems will appear and exceed the menu limit.

But if I only read those of the selected system, I would put for all the systems their corresponding custom databases, Zaccaria with their Retro, Remake ..., FX2 as FX2 but without Williams / Bally, etc.

Link to comment
Share on other sites

I wish magnasave buttons jumped wheel to next letter in alphabet. A,B,C,D,E.....

Holding flipper button for scroll is a guessing game !

 

Edit:  Thanks Mike_da_Spike.  I didn't realize that magnasave would page up and down a letter (as i run to the cab to give it a try)!  

I set up PinVol today so I was switching some graphics settings around in PinballX and going from fullscreen to windowed.  Also had to switch some button assignments so PinVol didn't conflict with anything when a shifted button is pressed.  

Link to comment
Share on other sites

30 minutes ago, bushav said:

I wish magnasave buttons jumped wheel to next letter in alphabet. A,B,C,D,E.....

Holding flipper button for scroll is a guessing game !

Magnasave button is already jumping to next/previous letter

  • Like 1
Link to comment
Share on other sites

  • 4 weeks later...

As I could see, PinballX now allows creating custom filters for each system or in general from Game Manager.

However, I have created some exclusive ones for Visual Pinball and supposedly they should only appear in Visual Pinball, however, they appear in the rest of the systems also when I go to lists, along with custom databases that are in any system.

This is for example a Sega.ini that should only be displayed in Visual Pinball.


[filter]
System = Visual Pinball
description =
year_from = 0
year_to = 0
category =
manufacturer = Sega
file =

 

This option is fantastic, but only if it works correctly and in Pinball FX3 we can have Marvel, Star Wars, Zen Studios, Universal, etc as filters, in Visual Pinball have Stern, Sega, Gottlieb, etc, in Zaccaria have EM, Retro, Deluxe , etc.
If you mix them all when entering lists, we are in the same situation as with custom databases.

Link to comment
Share on other sites

6 hours ago, PcTeknic said:

If you mix them all when entering lists, we are in the same situation as with custom databases.

Not exactly true that we are in the same situation as custom database.  A custom database was static. The filter is dynamic. Adding a table now that meets the filter is directly visible in the list.

I was thinking for weeks how to create this with custom files (and I had the idea), but Tom just implemented it.

For me a filter is fine to show system independent,  maybe an user option in settings to toggle it ?

Link to comment
Share on other sites

Indeed, now it is better because they are automatic.

But we are supposed to have the option to create them for all systems or for a specific system.

However, if we create filters for one system, they appear in all.

That is why we are in the same situation, we cannot create filters for Visual with manufacturers and decades, filters for TPA with Stern, Gottlieb, Williams, etc, filters for FX2 and FX3 with Marvel, Star Wars, etc, filters for Zaccaria with EM , RT, etc.

We can't because they will appear on all systems and because the list would exceed the menu maximum.

Link to comment
Share on other sites

I suppose the problem arises for Tom because PinballX can work with or without the systems menu, and this can complicate programming.

But you have to look for the formula, when we are in Visual Pinball, only the filters created for Visual Pinball should appear, it does not make sense that filters from other systems appear there, Marvel, Zen, Universal, Deluxe, RT ...

Link to comment
Share on other sites

21 hours ago, PcTeknic said:

Indeed, now it is better because they are automatic.

But we are supposed to have the option to create them for all systems or for a specific system.

However, if we create filters for one system, they appear in all.

That is why we are in the same situation, we cannot create filters for Visual with manufacturers and decades, filters for TPA with Stern, Gottlieb, Williams, etc, filters for FX2 and FX3 with Marvel, Star Wars, etc, filters for Zaccaria with EM , RT, etc.

We can't because they will appear on all systems and because the list would exceed the menu maximum.

FWIW, i'm happy with the current implementation. I now run VPX exclusively and have two custom systems set up for VPX. Whichever one of them i'm using i'd want to see the lists of the other. I do have the system menu disabled though so maybe there's an option to use that setting as a flag, i.e. if system menu disabled show all filtered lists, if system menu enabled show only filtered lists for the current system.. Just a thought.

  • Like 2
Link to comment
Share on other sites

Exact.
It's about finding a way to make it work well in both cases.
Currently, it does not matter if you do the filter for all systems or that you do it for a specific one, it will be seen in all.
In your case, it may not matter if the systems are Visual Pinball, Visual Pinball X and VPM5.
But remember that there are many other systems, currently I have the following:

Arcooda Pinball Arcade

Future Pinball

Malzbies Pinball Collection

MAME

Pinball Arcade

Pinball FX2

Pinball FX3

Pinball Wicked

Pro-Pinball

SlamIt Pinball

Taito Pinball (Visual)

Visual Pinball (DMD)

VPinball Classics (No DMD)

VPinball Fantasy (Originals)

VPinball Kids

VPinball PinUp

VPinball Spanish

Zaccaria Pinball

Each system requires different filters, which makes no sense to see when you are on other systems.

Zaccaria based in Type (EM, RT, AW, Deluxe)

FX in Type (Marvell, Star Wars, Zen, etc)

Spanish (Inder, Sonic, Peyper, Playmatic, Recreativos Franco, Juegos Populares)

When View FX3, need View FX3 Filters, not other system Filters.

Link to comment
Share on other sites

Names that contains () in the name (before the manufacturer with year), will not be displayed
For example I have a table called "Metallica (Premium Monsters) (Stern 2013)"
but the Premium monsters part will not be displayed
image.thumb.png.66147800785e5cb2b2760ef86a056d6c.png
There are a bunch of names that contains (according to IPDB) extra text, like "(limited edition)" or in this example (Premium monsters)
Is it possible to only filter out the last part between the () instead of the all in the text ?

  • Like 1
Link to comment
Share on other sites

Correct names are 

Ghostbusters LE (Stern 2016)

Ghostbusters Premium (Stern 2016)

Ghostbusters Pro (Stern 2016)

If you put in () versión, PinballX hide of description all works ()

Just need rename databases and files.

When you download files generalment the name is Ghostbusters LE (Stern 2016)

Don't rename this with (LE)

Link to comment
Share on other sites

On 3/23/2020 at 6:11 AM, joyrider3774 said:

@Mike_da_Spike i always close teamviewer when recording but will only work if you have keyboard / mouse attached to cabinet as it's possible teamviewer pops up a nag screen when closing and you need to be able to close it on the cabinet. I have no problem with that

I also use TeamViewer...and have noticed that you get about a minute where you do not get a popup after any initial login.  Example: I start the video recording session for a table after a long session and I know I'm going to get the popup and immediately X out.  You get 20 seconds before the table starts recording on the cab.  I log back in, close the popup, and X out.  No popup.

  • Thanks 1
Link to comment
Share on other sites

  • 2 weeks later...

Pinballx Feature request:

I would love 3 options in attract mode 

1) random (current)

2) alphabetical 

3) release date

It would be awesome to watch the abbreviated history of pinball on my cab!

Thx

Edited by Draco1962
Moved from GameEx Feature Requests to PinballX Feature Requests thread
Link to comment
Share on other sites

If Filters only show in Select System, don't have this problem.

But whith Filters showing in all systems is a Big problem.

I think the principal problem is this, one time solved this, scrolling can be god too for systems with a lot of Filters or all systems View.

Link to comment
Share on other sites

On 4/28/2018 at 12:54 PM, Draxonic said:

Feature Request: Put in a switch for ignoring "The" at the beginning of a table name for alphabetical sorting.

Eg. "The Lord of The Rings" would be sorted by "Lord" instead of "The"

 

I'd like to re-raise this request (It's been over two years, so I reckon that's long enough to warrant asking again).    :D

  • Like 1
Link to comment
Share on other sites

While we are re-asking years later, I would still really LOVE to have 3 options in attract mode.

1. Random (current) 

2. Alphabetical 

3. Chronological by release date.

My interest in my cabinet is pretty much in thirds. 1/3 playing it, 1/3 maintaining and updating and 1/3 just having it on in attract mode. Unfortunately, random like most music shuffles isn't very random and is pretty repetitive. In fact, if I were really dreaming I'd ask that random doesn't repeat until ALL on the list have been seen.

Fingers crossed. Thanks for PBX either way!

Link to comment
Share on other sites

  • 3 weeks later...

But I do not know if it is used to make a pcgames system and in the database put in the alternateexe the paths to the different executables or if it serves so that single table systems, such as Pro-Pinball, Wicked or SlamIt can be executed directly from the systems menu without accessing the menu with a single table to launch it.

I guess when I install it I'll see.
But sometimes, I think that the information when publishing a new release is very brief.

An explanation of what a feature is for and how to use it, never hurts.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...