grimworm Posted March 24, 2019 Share Posted March 24, 2019 I have recently redone my VP system. When I redid the system, I put the current then version PinballX in - ver 3.32. My backglass monitor was not showing backglasses. I do not use B2S in frontend. So I tried all monitors 1 to 5 (My windows display shows monitor 2 is my backglass) just to see if backglass would come up. It did not. I then tried Windowed mode and I see the backglass is sitting on the main monitor 1. It cannot be moved. I know it worked in Ver 3.28, so I reinstalled that version and all was good again. Since then, I've been playing with getting my pinDMD3 working with UltraDMD and full colour roms so I tried 3.35 and today 3.36. The backglass is still showing on the desktop and I've tried changing the monitor # to 1 - 5 again without success. I'll again downgrade to 3.28 but I wanted to share this to see if there is something obvious I've missed. Log and INI files included as well as a pic of my desktop. One last thing is I've connected the main playfield to my video card and the backglass to my on board GPU. I'm going to try switching this now to see if it resolves the issue.... Nope. I've included those ini and log files too. I'm reverting back to my original setup method and downgrading to 3.28 for now. I love this frontend though!!! Thank you Tom! PinballX.ini log.txt log - One video card.txt PinballX - One Video Card.ini Link to comment Share on other sites More sharing options...
Mike_da_Spike Posted March 24, 2019 Share Posted March 24, 2019 If you use the gtx 1060 for playfield and backglass. Is that working ? Link to comment Share on other sites More sharing options...
grimworm Posted March 24, 2019 Author Share Posted March 24, 2019 No, the one video card did not work. I included those files (ini and log) with the "One Video Card" suffix in my first post in case there is something there. Currently back on 3.28 and working properly. I've included my current ini and log files. Thanks PinballX.ini log.txt Link to comment Share on other sites More sharing options...
scutters Posted March 26, 2019 Share Posted March 26, 2019 No errors in the logs so i guess the backglass is showing somewhere just not visible (in fullscreen). Maybe you need to try the backglass on screen numbers higher than 5 (you'd have to edit pinballx.ini directly, [Backglass] section monitor=x, or reset the monitor numbers https://support.displaylink.com/knowledgebase/articles/736116-windows-display-properties-identify-numbers-are Link to comment Share on other sites More sharing options...
Mike_da_Spike Posted March 26, 2019 Share Posted March 26, 2019 Checking your ini file I see the following for your playfield windowwidth=480 windowheight=270 windowx=27 windowy=246 Do you have a small playfield, or is this because you use the windowd ? Not sure how your backglass is set in windows (you mentioned as monitor 2), but looks like the positioning of your backglass starts with 0,0. Isn't the backglass on the right side of your playfield? This looks over the playfield, but not sure [BackGlass] monitor=1 x=0 y=0 width=1360 height=768 Link to comment Share on other sites More sharing options...
Outhere Posted March 26, 2019 Share Posted March 26, 2019 Playfield monitor should be on the left with additional monitors to the right and align with the top of the Playfield monitor- Example Below Try this order Playfield, BackGlass, Dmd then Topper Not necessarily in the order of 1 2 3 Link to comment Share on other sites More sharing options...
Recommended Posts