Smiggedy Posted July 24, 2018 Share Posted July 24, 2018 Building my first cab and lovin it, made a million mistakes so far and figured most out using these threads. Thanks a ton for everyone's help setting these games up and discussing each issue. One nemesis remains that I haven't found the answer I need yet. Please help if you can. I have PBX running with both VPX and VPT tables enabled at this time. PBX scrolls through all the games fine and loads up both types and plays great. Exiting VPT tables works fine as well, it just pops back to the wheel to select the next table. When trying to exit a VPX table however, the only way to exit the game is to hit "Q" and close the VPX game. I can then hit ALT TAB and it will load back up PBX to select another table. I've read a ton of threads where people map a different key and resolve the issue, but I've tried em all with no luck. PBXRecorder also will not exit correctly (like VPT tables) after recording the vids on VPX tables. The game stays running after the video is captured until you click the tray icon and close all screens. Is there a setting I need to check for VPX that allows the game to close down or back out properly? I had 10.4 running and this issue, just loaded the 10.5 stuff and it's still happening. I apologize if the "fix" has been written somewhere and I missed it, please help here or direct me to a thread that addresses the issue I'm having. Thanks a bunch! Link to comment Share on other sites More sharing options...
scutters Posted July 24, 2018 Share Posted July 24, 2018 Are you running PBX as admin?... worth a shot if not. Link to comment Share on other sites More sharing options...
Smiggedy Posted July 24, 2018 Author Share Posted July 24, 2018 Checked it and I wasn't running as admin, but that didn't fix the problem. VPT tables back right out to PBX, and VPX tables still require me to hit Q and close VPX then it will reload PBX. Please let me know any other thoughts, I'll try Anything! Thanks! Link to comment Share on other sites More sharing options...
Draco1962 Posted July 24, 2018 Share Posted July 24, 2018 You may want to attach copies of your pinballx.ini and log.txt files when reporting an error to the files can be reviewed. Link to comment Share on other sites More sharing options...
Smiggedy Posted July 25, 2018 Author Share Posted July 25, 2018 Ok, here's the log, can't find the INI file though... Let me know where it's at and I can post it as well. The log shows below where I started PBX, opened South Park VPT and exited right back to PBX. I then opened South Park VPX and it would not exit back to PBX. I had to hit the Q button and it went to the VPX screen, I hit ALT TAB and it then loaded back up PBX. I then loaded Space Invaders VPX and had to do the same process. Finally I loaded Star Trek 25th VPT table and could back right out to PBX like I think It should work.... Such a simple thing it seems like, hopefully someone can see what I'm missing from the log below. Once again, any help appreciated! Thanks! Spoiler 01:24:38.2 7/25/2018: PinballX - Version 3.06 01:24:38.4 7/25/2018: Windows 10 Pro 64-bit (7.9GB) 01:24:38.4 7/25/2018: Loading Settings 01:24:38.4 7/25/2018: Launching Startup Program: notepad.exe 01:24:38.4 7/25/2018: \notepad.exe 01:24:38.5 7/25/2018: Initialize Component 01:24:38.5 7/25/2018: Initialize Display 01:24:40.0 7/25/2018: Loading PlugIns 01:24:41.4 7/25/2018: Created DirectX BackGlass Window 01:24:41.4 7/25/2018: Created DirectX DMD Window 01:24:41.4 7/25/2018: Looking for startup images 01:24:41.6 7/25/2018: Testing Flash engine. 01:24:41.7 7/25/2018: Hiding Cursor 01:24:41.7 7/25/2018: Hiding Taskbar 01:24:41.8 7/25/2018: Getting GPU Information 01:24:41.8 7/25/2018: CPU: AMD Athlon( tm ) X4 860K Quad Core Processor 01:24:41.8 7/25/2018: GPU 1: NVIDIA GeForce GTX 670 01:24:41.8 7/25/2018: Displays: 3 01:24:42.1 7/25/2018: Load Game List 01:24:42.1 7/25/2018: Loading Database: Visual Pinball 01:24:42.3 7/25/2018: Loading Database: VPinballX 01:24:42.3 7/25/2018: Finding and matching artwork and videos 01:24:43.1 7/25/2018: Loading Game Statistics and Scores 01:24:43.1 7/25/2018: Main display running full screen windowed. 01:24:43.2 7/25/2018: Loading Surfaces 01:24:43.4 7/25/2018: Finished Loading Surfaces 01:24:43.4 7/25/2018: Initialize Audio 01:24:43.7 7/25/2018: Set Keyboard Controls 01:24:43.7 7/25/2018: Initialize Joystick 01:24:43.7 7/25/2018: No Joysticks Attached 01:24:43.7 7/25/2018: Started 01:25:09.9 7/25/2018: Launch System 01:25:09.9 7/25/2018: Waiting for threads 01:25:10.0 7/25/2018: Disposing display 01:25:11.6 7/25/2018: Writing ScreenRes.txt 01:25:11.6 7/25/2018: C:\Visual Pinball\VPinball994.exe /play -"C:\Visual Pinball\Tables\South Park. vpt " 01:25:11.9 7/25/2018: C:\PinballX\vpauto.exe 01:25:19.2 7/25/2018: Hidden Visual Pinball Editor Window 01:25:20.9 7/25/2018: Found PinMAME ROM: sprk_103.nv 01:25:20.9 7/25/2018: Setting DMD position 01:25:54.5 7/25/2018: Exit System Control Pressed 01:26:03.4 7/25/2018: Created DirectX BackGlass Window 01:26:03.5 7/25/2018: Created DirectX DMD Window 01:26:03.5 7/25/2018: Main display running full screen windowed. 01:26:11.2 7/25/2018: Launch System 01:26:11.2 7/25/2018: Waiting for threads 01:26:11.4 7/25/2018: Disposing display 01:26:12.9 7/25/2018: Writing ScreenRes.txt 01:26:12.9 7/25/2018: C:\Visual Pinball\VPinballX.exe /play -"C:\Visual Pinball\Tables\South Park 1.1. vpx " 01:26:16.8 7/25/2018: C:\PinballX\vpauto.exe 01:26:30.9 7/25/2018: Hidden Visual Pinball Editor Window 01:26:32.4 7/25/2018: Found PinMAME ROM: sprk_103.nv 01:26:32.4 7/25/2018: Setting DMD position 01:28:13.5 7/25/2018: Exit System Control Pressed 01:28:20.1 7/25/2018: Created DirectX BackGlass Window 01:28:20.2 7/25/2018: Created DirectX DMD Window 01:28:20.2 7/25/2018: Main display running full screen windowed. 01:28:32.1 7/25/2018: Launch System 01:28:32.1 7/25/2018: Waiting for threads 01:28:32.2 7/25/2018: Disposing display 01:28:33.9 7/25/2018: Writing ScreenRes.txt 01:28:33.9 7/25/2018: C:\Visual Pinball\VPinballX.exe /play -"C:\Visual Pinball\Tables\Space Invaders (Bally 1979) VPX1. vpx " 01:28:34.4 7/25/2018: C:\PinballX\vpauto.exe 01:28:50.1 7/25/2018: Hidden Visual Pinball Editor Window 01:28:51.2 7/25/2018: Found PinMAME ROM: spaceinb.nv 01:28:51.2 7/25/2018: Setting DMD position 01:29:40.7 7/25/2018: Exit System Control Pressed 01:29:47.3 7/25/2018: Created DirectX BackGlass Window 01:29:47.3 7/25/2018: Created DirectX DMD Window 01:29:47.4 7/25/2018: Main display running full screen windowed. 01:30:10.6 7/25/2018: Launch System 01:30:10.6 7/25/2018: Waiting for threads 01:30:10.6 7/25/2018: Disposing display 01:30:11.9 7/25/2018: Writing ScreenRes.txt 01:30:11.9 7/25/2018: C:\Visual Pinball\VPinball994.exe /play -"C:\Visual Pinball\Tables\Star Trek 25th Anniversary (Data East 1991). vpt " 01:30:11.1 7/25/2018: C:\PinballX\vpauto.exe 01:30:18.3 7/25/2018: Found PinMAME ROM: trek_201.nv 01:30:18.3 7/25/2018: Setting DMD position 01:30:18.9 7/25/2018: Hidden Visual Pinball Editor Window 01:30:23.5 7/25/2018: Exit System Control Pressed 01:30:32.2 7/25/2018: Created DirectX BackGlass Window 01:30:32.3 7/25/2018: Created DirectX DMD Window 01:30:32.3 7/25/2018: Main display running full screen windowed. 01:30:37.9 7/25/2018: Exiting 01:30:37.9 7/25/2018: Showing Taskbar 01:30:37.9 7/25/2018: Unhiding Mouse Cursor 01:30:37.9 7/25/2018: Disposing Plugins 01:30:37.9 7/25/2018: Saving Settings 01:30:37.9 7/25/2018: Bye Link to comment Share on other sites More sharing options...
Smiggedy Posted July 25, 2018 Author Share Posted July 25, 2018 I think this might be the INI file, ( C:\Pinballx\Config ), hopefully somebody can see where I went wrong! Thanks Spoiler [Display] Monitor=0 rotate=270 windowed=False windowwidth=480 windowheight=270 windowx=461 windowy=207 PlayFieldBrightness=230 WheelTextColor=ffffffff WheelTextOutlineColor=ff000000 InfoTextColor=ffffffff InfoTextOutlineColor=ff000000 FilterTextColor=ffffffff FilterTextOutlineColor=ff000000 MenuColor=ffffa500 FullScreenWindowed=False WheelAutoCrop=False ShowExitImage=True [BackGlass] monitor=1 x=0 y=0 width=1366 height=768 UseB2S=False AutoPositionB2S=True [DMD] Enabled=True monitor=2 x=0 y=10 width=1440 height=400 AutoPositionPinMAME=True HidePinMAME=False UsePinMAME=True [FileSystem] EnableFileMatching=False [Interface] DesktopModeEnabled=False EnableAdditionalDetail=True ShowSystem=True ShowRatings=True WheelOverlay=3 EnableDefaultFilters=True [Audio] StreamVolume=90 SampleVolume=90 PlaySoundInVideos=True [Startup] playsound=True playvideo=True StartWithWindows=No [KeyCodes] quit=9 left=160 right=161 select=13 rotate=82 pageleft=90 pageright=191 exitemulator=9 ingame=80 screenshot=83 screenshotbackglass=66 instructions=73 volumedown=109 volumeup=107 credit=53 plunger=13 launch=96 capturevideos=86 [JoyCodes] quit=7 left=9 right=1 select=8 rotate=3 pageleft=4 pageright=5 exitemulator=7 ingame=13 instructions=14 Credit=11 Plunger=0 [Text] Line1=Free Play Line2=Press Start Featuring=Featuring Tables=Tables PlayGame=Play Ball Instructions=Instructions Information=Information Flyer=Flyer Gameplay=Gameplay Tutorial=Tutorial ExitGame=Exit Game ReturnToGame=Return to Game Return=Return Exit=Exit Shutdown=Shutdown [FuturePinball] Enabled=False WorkingPath=C:\PinballX\Future Pinball TablePath=C:\PinballX\Future Pinball\Tables Executable=Future Pinball.exe Parameters=/open "[TABLEPATH]\[TABLEFILE]" /play /exit /arcaderender LaunchBeforeEnabled=false LaunchBeforeWorkingPath= LaunchBeforeExecutable=notepad.exe LaunchBeforeHideWindow=False LaunchBeforeWaitForExit=True LaunchAfterEnabled=False LaunchAfterWorkingPath= LaunchAfterExecutable=notepad.exe LaunchAfterHideWindow=False LaunchAfterWaitForExit=True MouseClickFocus=True FPRAMPath=C:\PinballX\Future Pinball\fpRAM [VisualPinball] Enabled=True WorkingPath=C:\Visual Pinball TablePath=C:\Visual Pinball\Tables Executable=VPinball994.exe Parameters=/play -"[TABLEPATH]\[TABLEFILE]" LaunchBeforeEnabled=false LaunchBeforeWorkingPath= LaunchBeforeExecutable=notepad.exe LaunchBeforeHideWindow=False LaunchBeforeWaitForExit=True LaunchAfterEnabled=False LaunchAfterWorkingPath= LaunchAfterExecutable=notepad.exe LaunchAfterHideWindow=False LaunchAfterWaitForExit=True [ExitScreen] Enabled=True EnableExit=True EnableShutdown=True ConfirmExitGameTimer=False [StartupProgram] Enabled=True WorkingPath= Executable=notepad.exe Paramaters= HideWindow=true WaitForExit=false [ExitProgram] Enabled=False WorkingPath= Executable=notepad.exe Paramaters= HideWindow=False WaitForExit= [AttractMode] Enabled=True Timer=2 ShowFor=60 MuteAudio=False [System_1] Name=MAME Enabled=False WorkingPath=C:\- EMULATORS -\- MAME - TablePath=C:\ Executable=mamep64.exe Parameters=[TABLEFILE] SystemType=0 [AutoExit] Enabled=True Minutes=10 [Login] Enabled=False [PinballFX2] Enabled=False WorkingPath=C:\PinballX\Pinball FX2 Executable=Pinball FX2.exe Parameters=-applaunch 226980 [TABLEFILE] Process=Pinball FX2.exe Rotate=True WaitFor=11 [Internal] lastwheelcachematchsize=626423 lastselected=Star Trek Enterprise Limited Edition (Stern 2012) VPX GreatStar Trek Enterprise Limited Edition (Stern 2012) VPX GreatSystem_5 filter_year= filter_company= filter_custom= filtername=Tables lastwheelcachematchsize2=13309 filter_favorites=False filter_lastplayed=False filter_mostplayed=False [PinballArcade] WorkingPath=C:\Program Files (x86)\Steam Executable=steam.exe Parameters=-applaunch 238260 Process=PinballArcade.exe Enabled=False [GameListManager] onlinemode=false [SetupWizard] EmuPath1=C:\Emulators AssetPath1=C:\Assets RomPath1=C:\Roms DefaultPathPrompt=True DownloadDatabasePrompt=True DownloadEmulatorPrompt=True WizardMode=Advanced CustomArray= SearchArray= SavePosition=False SectionIndex=4 SearchText= EmulatorIndex=0 EmulatorGroupIndex=0 DaphneIndex=0 HTMLAppsIndex=0 ExternalAppsIndex=0 RadioStationsIndex=0 NewsFeedsIndex=0 MappedDrivesIndex=0 SystemIndex=4 ShowPanel=True FontSize=1 WindowState=Normal WindowSize=1168, 809 WindowLocation=378, 51 [System_2] Name=VPinball921 WorkingPath=C:\Program Files (x86)\Visual Pinball TablePath=C:\Program Files (x86)\Visual Pinball\Tables Executable=VPinball921.exe Parameters=/play -"[TABLEPATH]\[TABLEFILE]" Enabled=False SystemType=1 [System_3] Name=VPphysmod5 WorkingPath=C:\Visual Pinball TablePath=C:\Visual Pinball\Tables Executable=VPphysmod5.exe Enabled=False SystemType=0 Parameters=/play -"[TABLEPATH]\[TABLEFILE]" [System_4] Name=VPinball902 Enabled=False SystemType=1 WorkingPath=C:\Program Files (x86)\Visual Pinball TablePath=C:\Program Files (x86)\Visual Pinball\Tables Executable=VPinball902.exe Parameters=/play -"[TABLEPATH]\[TABLEFILE]" [System_5] Name=VPinballX Enabled=True SystemType=1 WorkingPath=C:\Visual Pinball TablePath=C:\Visual Pinball\Tables Executable=VPinballX.exe Parameters=/play -"[TABLEPATH]\[TABLEFILE]" LaunchAfterEnabled=False LaunchBeforeEnabled=False [System_6] Name=Physmod 5 updated WorkingPath=C:\Visual Pinball TablePath=C:\Visual Pinball\Tables Executable=VPinball99_PhysMod5_Updated.exe Parameters=/play -"[TABLEPATH]\[TABLEFILE]" Enabled=False SystemType=1 [RealDMD] EnableColor=False Color=ffff0000 [Plugin_1] Enabled=False Name=PlugInLED.dll [Plugin_2] Enabled=False Name=PlugInSpeech.dll [Plugin_3] Enabled=False Name=QuickLaunch (PinballX Edition).dll [Plugin_4] Enabled=False Name=Xpadder Plugin.dll [Topper] monitor=2 [System_7] Name=VP99 Physmod5 WorkingPath=C:\Visual Pinball TablePath=C:\Visual Pinball\Tables Executable=VPinball99_PhysMod5.exe Parameters= Enabled=False SystemType=1 [VideoCapture] Seconds=60 UseGPU=True KeysStartRecord=67 KeysEndRecord=88 SavePath=C:\Users\A person\Desktop\Wheel TBD [PinballFX3] Enabled=False [frmInfo] Size=378, 314 Location=510, 177 WindowState=Normal Link to comment Share on other sites More sharing options...
Smiggedy Posted September 22, 2018 Author Share Posted September 22, 2018 Problem solved, I've read it 100 times to run as administrator but it "wasn't" running as administrator... Ha Lay Lew Ya! Thanks for the help! Link to comment Share on other sites More sharing options...
Recommended Posts