Draco1962 Posted June 29, 2016 Share Posted June 29, 2016 I had manually changed it to 0. I have played all the way through from the default 12 seconds to 29 seconds and consistantly get the same results. Even tried it at the 5- 11seconds settings previously. IDK, but all was just fine prior to Farsight making the horrendous changes to the UI. Curse them. Link to comment Share on other sites More sharing options...
hlr53 Posted June 29, 2016 Share Posted June 29, 2016 I did a clean install of V2.21 and PBA works fine. I loaded and played a few tables and everything exited back to PBX gracefully. I just bought some PBA tables last night so I never saw the old interface. If I had a cab it would tee me off too! Link to comment Share on other sites More sharing options...
Drybonz Posted June 30, 2016 Author Share Posted June 30, 2016 2 hours ago, Draco1962 said: I had manually changed it to 0. I have played all the way through from the default 12 seconds to 29 seconds and consistantly get the same results. Even tried it at the 5- 11seconds settings previously. IDK, but all was just fine prior to Farsight making the horrendous changes to the UI. Curse them. I tried changing the default seconds also, but it was no good... always just hangs on the loading screen indefinitely. I tried it with and without the cam mod... same results. Mine was also working prior to the new interface. Everyone with problems should complain on the PBA Steam discussion, and downrate their reviews. Link to comment Share on other sites More sharing options...
rothbauerw Posted July 1, 2016 Share Posted July 1, 2016 Game selection isn't working for me either. When the PBA start screen pops-up, I can hear it trying to select, but it's like it can't find "Press to Start" to move to the next screen. This is a cabinet setup. My grid is 4 colums by 18 rows. PinballX.ini log.txt Pinball Arcade.xml Link to comment Share on other sites More sharing options...
Carny_Priest Posted July 2, 2016 Share Posted July 2, 2016 Yep, similar result to rothbauerw. I've only started getting TPA working with PinballX in any serious way today, so I don't have any history working with the integrated launcher. For your information, I typically run PinballX at 4K downsampled so that I do not lose video backglass support with FX 2. I use the display changer helper app (dc2.exe) to change screen resolutions to 1080p and rotate the playfield screen to portrait prior to launching the freecammod. And then change back to 4K when I close out of TPA. The display switching and the launching of TPA seem to be working fine. I get to the menu screen. I can see the cursor clicking default sort (A-Z) and scrolling down but it is settling on the wrong table My database is based on the one draco attached earlier in this thread with a fix and some edits to some description tags to more closely match IPDB. I launch these tables from a TEST sub-menu. PinballX.ini log.txt Pinball Arcade.xml TEST Pinball Arcade.xml Link to comment Share on other sites More sharing options...
robbennett34 Posted July 2, 2016 Share Posted July 2, 2016 On 6/27/2016 at 5:31 PM, Draco1962 said: At present, this is not working for me. Attached are my .xml, log.txt and pinballx.ini files. When I attempt to launch a table, I hear what sound like some keypresses in the background, then I get a prompt asking if I really want to exit and no attempt to load a table. Also, Game List Manager only allows for a grid that goes up to row 9. In a portrait display, there are only 4 columns across and, if you have all the tables, 18 rows down (with more to come as they add additional tables). log.txt PinballX.ini Pinball Arcade.xml I am experiencing the same. It is as if the menu goes up one and over left (exit table). Need to take the left out of the script...somewhere Link to comment Share on other sites More sharing options...
andyco Posted July 3, 2016 Share Posted July 3, 2016 got it working just need to do the grid positions then im good to go. will post xml when done. Link to comment Share on other sites More sharing options...
andyco Posted July 3, 2016 Share Posted July 3, 2016 here is the xml all tables plus the new indy 500 and all grid positions this one works for me. my pinball arcade is none steam version latest 1.51.8 The Pinball Arcade.xml Link to comment Share on other sites More sharing options...
Tom Speirs Posted July 3, 2016 Share Posted July 3, 2016 That's great. Ill include that in the install if it is okay with you? 2 Link to comment Share on other sites More sharing options...
andyco Posted July 3, 2016 Share Posted July 3, 2016 no problem mate. 1 Link to comment Share on other sites More sharing options...
uturn007 Posted July 3, 2016 Share Posted July 3, 2016 Thanks Andyco for sharing was about to pull my hair out sitting down to go through setting up the grid again after the change Thanks Tom for the continued updates and support to the software. Link to comment Share on other sites More sharing options...
Carny_Priest Posted July 3, 2016 Share Posted July 3, 2016 4 hours ago, andyco said: here is the xml all tables plus the new indy 500 and all grid positions this one works for me. my pinball arcade is none steam version latest 1.51.8 The Pinball Arcade.xml El Dorado: City of Gold should be grid position 2x6 El Dorado should be grid position 3x6 CFTBL is a Bally table Cyclone year of production is 1988 The Getaway: High Speed II is 1992 Indianapolis 500 year of production is 1995 Starship Troopers is a Sega table Appreciate the attachment because I found some errors in my effort. Link to comment Share on other sites More sharing options...
andyco Posted July 3, 2016 Share Posted July 3, 2016 will take a look. Link to comment Share on other sites More sharing options...
Draco1962 Posted July 3, 2016 Share Posted July 3, 2016 Still can't get this bloody thing to work with the integrated setup. Still hear the selections taking place at the "Click here to start" page, then clicking the exit option. Now Indy 500 shows in the list which is great since I did not purchase it. At least before in the old UI they didn't throw unpurchased content into the menu. So I have to correct the xml to put in a table's position that i haven't purchased. Just lovely. Throwing in the towel on this one for now, just too frustrating at the moment. Link to comment Share on other sites More sharing options...
andyco Posted July 3, 2016 Share Posted July 3, 2016 sorry my bad here is the new one. let us no if anything wrong. The Pinball Arcade.xml Link to comment Share on other sites More sharing options...
andyco Posted July 3, 2016 Share Posted July 3, 2016 i got steam version then changed it to none steam version with all tables. seem to work for me. Link to comment Share on other sites More sharing options...
andyco Posted July 3, 2016 Share Posted July 3, 2016 here are my ini if it helps mate. log.txt PinballX.ini Link to comment Share on other sites More sharing options...
Draco1962 Posted July 3, 2016 Share Posted July 3, 2016 Thanks for the share. I have the Steam version. Unfortunately it does not work with your settings. Link to comment Share on other sites More sharing options...
andyco Posted July 3, 2016 Share Posted July 3, 2016 @Draco1962 sent u message Link to comment Share on other sites More sharing options...
andyco Posted July 3, 2016 Share Posted July 3, 2016 i got the xml from here a few posts back so not my error mate i just added the missing tables. Link to comment Share on other sites More sharing options...
andyco Posted July 3, 2016 Share Posted July 3, 2016 @Carny_Priest all sorted let us no if owt else wrong. The Pinball Arcade.xml Link to comment Share on other sites More sharing options...
Carny_Priest Posted July 3, 2016 Share Posted July 3, 2016 Waiting for an update to TPAFreeCamMod to test out. I did have some errors in my gridposition tags which might have been the cause of my table selection issues. Link to comment Share on other sites More sharing options...
andyco Posted July 5, 2016 Share Posted July 5, 2016 here is a small vid of selation hope this mite help. pin bot selection (1) (2).mp4 Link to comment Share on other sites More sharing options...
Drybonz Posted July 5, 2016 Author Share Posted July 5, 2016 These latest xml's just take me to the main startup screen of TPA. It doesn't take me to the table. Link to comment Share on other sites More sharing options...
tvare Posted July 6, 2016 Share Posted July 6, 2016 On 28.6.2016 at 0:54 AM, Tom Speirs said: Yes, grid positions all new since they are different anyway. Otherwise everything else should be auto unless you are for some reason on the old version with the old interface then change the setting in the setup wizard. I have only 3 columns so need to have 25 rows. Limit seems to be 20 right now. Link to comment Share on other sites More sharing options...
Recommended Posts