rtkiii

The new version seems to have done it. I have only tested a couple tables but ones I know hung everytime seem to be ok now. I thought I downloaded a new version when switching to new PC but I guess not :0 Thanks again!

Here you golog.txt This last time I was able to close one ok...then the next hung up.

Hey gents, I am having issue where tables are not closing fully or PBX gets stuck at loading when closing VPX 10.8 - I hit escape button while in table the VPX menu shows where you have to manually select quit - When I hit Quit the table closes but PBX gets stuck at loading. I believe this happens because VPX is still running. - Esc and Button 1 are my configure settings in PBX - Q is quit button in VPX I am sure it is an easy fix but I am missing something. thanks as always. Rich PinballX.ini

I typed up a whole response and right before send I see the "DMD enabled" was set to no. DERF! Thanks, I looked at that screen like 5 times....lol

I am moving my VPin to a beefier PC and just setting up PBX. I moved the media files from my old PC to the new one and fired up DB Manager and it sees the BG and Table videos fine. It seems I have DMD videos as well but shows in yellow vs green. If I try to drag the DMD file from the media folder into DB Manager it says "Invalid media, it is not enabled in settings. Copy cancelled." I looked in settings but nothing is jumping out at me to change in DB manager. I am sure I am missing something easy. DMD files are .f4v As always I appreciate any help. Rich

I was adding a new table this morning and noticed it recorded the DMD this time. Maybe I needed to do a reboot after the changes I made last night? But just tested 24 and it recorded now as well. So I am good to go. Thanks for the information on doing the setup again...I honestly thought when I was doing that in PBXRecorder it was updating the screenres as well..my mistake 24 PBXrecorder set to record complete media set FYI (FTP not enabled): No Wheel Image - 24.png Launching table: VPinballX.exe -play C:\Program Files (x86)\Visual Pinball\Tables\VPX\24 (Stern 2009)_Bigus(MOD)2.0.vpx Video and screenshot capture (09:10:54) Recording "C:\PBXRecorder_x64\playfield.mkv" Recording "C:\PBXRecorder_x64\bg.mkv" Recording "C:\PBXRecorder_x64\dmd.mkv" Convert Videos to f4v if video was captured (09:12:13) Converting to "C:\PinballX\Media\VPX\Table Videos\24.f4v" Converting to "C:\PinballX\Media\VPX\Backglass Videos\24.f4v" Converting to "C:\PinballX\Media\VPX\DMD Videos\24.f4v" Table done (09:13:00)

Ah, I uploaded .ini instead...dang. Here you go. I see where it sees the DMD stuff now...not sure if that offset at the bottom is causing the issue but I see the DMD playing during the recording. Still updating BG and playfield in my Media/VPX folders. No file being added to DMD Video... PBXrecorder.log

ok I had not ran the b2sdetector since I added the new LCD. I did that and it added the new monitor screenres is updated. But PBXRecorder still not getting DMD... PBXrecorder.ini

I just did the size again and now I see it on the 3rd monitor. Weird...i did that roiginally but it did not take. I dunno but I think this is good now.

sure...attached, PBXrecorder.log

Oh I did not know that was diagnostic mode...i thought you could use it to see where other windows were at. In normal mode it does not show the DMD video. Do I have to set the position? I tried earlier and it did not change anything. I did turn off topper since I do not have that.

I have another post about PBX settings for this new 3rd screen but I am also having issues getting PBXRecorder to record the 3rd screen. I ran through the screenres utility and moved the DMD to the 3rd screen and that all looks fine. Changed my settings for PBXrecorder as well but still only only doing my other 2 monitors. Any assistance would be great...thanks! PBXrecorder.ini

Hey everyone, Been doing some updates to my cabinet and so I added a 7" LCD as a 3rd screen to me cabinet. I was able to get VPX to use it but when I add DMD file to DB manager it looks to be playing on my primary screen. I have tried setting DMD to every screen in PBS setup but the DMD stays in the same spot. I am sure I am missing something dumb but cant seem to figure it out. PinballX.ini

I thought once I updated to Win10 and setup fresh the issue would go away. But still having this issue. Just checked the display settings and see I did have "auto position directb2s" set to yes...changed to no and at first glance looks like it is ok. Will update after some more testing.

ding ding ding!!!!! You are my hero...again! Thank you good sir!