rtkiii

I was adding a new table this morning and noticed it recorded the DMD this time. Maybe I needed to do a reboot after the changes I made last night? But just tested 24 and it recorded now as well. So I am good to go. Thanks for the information on doing the setup again...I honestly thought when I was doing that in PBXRecorder it was updating the screenres as well..my mistake 24 PBXrecorder set to record complete media set FYI (FTP not enabled): No Wheel Image - 24.png Launching table: VPinballX.exe -play C:\Program Files (x86)\Visual Pinball\Tables\VPX\24 (Stern 2009)_Bigus(MOD)2.0.vpx Video and screenshot capture (09:10:54) Recording "C:\PBXRecorder_x64\playfield.mkv" Recording "C:\PBXRecorder_x64\bg.mkv" Recording "C:\PBXRecorder_x64\dmd.mkv" Convert Videos to f4v if video was captured (09:12:13) Converting to "C:\PinballX\Media\VPX\Table Videos\24.f4v" Converting to "C:\PinballX\Media\VPX\Backglass Videos\24.f4v" Converting to "C:\PinballX\Media\VPX\DMD Videos\24.f4v" Table done (09:13:00)

Ah, I uploaded .ini instead...dang. Here you go. I see where it sees the DMD stuff now...not sure if that offset at the bottom is causing the issue but I see the DMD playing during the recording. Still updating BG and playfield in my Media/VPX folders. No file being added to DMD Video... PBXrecorder.log

ok I had not ran the b2sdetector since I added the new LCD. I did that and it added the new monitor screenres is updated. But PBXRecorder still not getting DMD... PBXrecorder.ini

I just did the size again and now I see it on the 3rd monitor. Weird...i did that roiginally but it did not take. I dunno but I think this is good now.

sure...attached, PBXrecorder.log

Oh I did not know that was diagnostic mode...i thought you could use it to see where other windows were at. In normal mode it does not show the DMD video. Do I have to set the position? I tried earlier and it did not change anything. I did turn off topper since I do not have that.

I have another post about PBX settings for this new 3rd screen but I am also having issues getting PBXRecorder to record the 3rd screen. I ran through the screenres utility and moved the DMD to the 3rd screen and that all looks fine. Changed my settings for PBXrecorder as well but still only only doing my other 2 monitors. Any assistance would be great...thanks! PBXrecorder.ini

Hey everyone, Been doing some updates to my cabinet and so I added a 7" LCD as a 3rd screen to me cabinet. I was able to get VPX to use it but when I add DMD file to DB manager it looks to be playing on my primary screen. I have tried setting DMD to every screen in PBS setup but the DMD stays in the same spot. I am sure I am missing something dumb but cant seem to figure it out. PinballX.ini

I thought once I updated to Win10 and setup fresh the issue would go away. But still having this issue. Just checked the display settings and see I did have "auto position directb2s" set to yes...changed to no and at first glance looks like it is ok. Will update after some more testing.

ding ding ding!!!!! You are my hero...again! Thank you good sir!

log.txt

Just the AMD Radeon VC The backglass i using DVI and playfield is HDMI. Not sure why that would matter. Verified the videos both show same codec info as well. PinballX.ini

yeah, the next time I fire it up I will. So weird they are the same file format so it baffles my brain

Thanks, i applied the changes as suggested..this got the table videos to load but not the backglasses

Hey all, Decided to put in new HDD with Win10 in my cabinet. Win7 would not upgrade . So I am basically setting up from scratch and was doing from memory of an install I did like 8 years ago. LOL - yeah i am dumb. I installed and tried copying config files but then PBX would not launch. So I uninstalled and started from scratch. My PinballFX3 list seems to work ok but VP and VPX list I have just show black. If I remove the video files from the path below I see the "grey" screen like no media has been loaded. So I am sure PBX is seeing the video files but not playing. They are .f4v file format. Wheel images are fine. The video files are C:\PinballX\Media\VPX. I installed the LAV codecs and took defaults.(I did not have this original and the PinballFX3 tables would only show backglass). Then I remembered I needed some special codecs and found the PBX install instructions online. Once installed the PBFX3 show BG and tables now but VP and VPX tables still show the black screen. I am sure this is an easy fix but I must be missing something. Thanks,