Jump to content

All my products and services are free. All my costs are met by donations I receive from my users. If you enjoy using any of my products, please donate to support me. My bare hosting costs are currently not met so please consider donating by either clicking this text or the Patreon link on the right.

Patreon

Recommended Posts

Posted

I'm using FP with BAM and have everything setup right in the PBX Settings. It will load tables and play them but will crash to desktop every time I hit ESC Key instead of going back to the PBX Menu. I noticed the log has 2 Errors 19:27:18.8  11/18/2018:  HRESULT: [0x88760868], Module: [SharpDX.Direct3D9], ApiCode: [D3DERR_DEVICELOST/DeviceLost], Message: Unknown
19:27:18.9  11/18/2018:  Error. Exiting

& this Error 19:27:18.9  11/18/2018:  Video_none
19:27:18.9  11/18/2018:  HRESULT: [0x8876086C], Module: [SharpDX.Direct3D9], ApiCode: [D3DERR_INVALIDCALL/InvalidCall], Message: Unknown
19:27:18.9  11/18/2018:     at PinballX.FrmMain.a(Boolean A_0, Boolean A_1, Boolean A_2, Boolean A_3, Boolean A_4, Boolean A_5, Boolean A_6)
19:27:18.9  11/18/2018:     at PinballX.FrmMain.d(Boolean A_0)
19:27:18.9  11/18/2018:     at PinballX.FrmMain.au()
19:27:18.9  11/18/2018:     at PinballX.FrmMain..ctor()

Please let me know what is causing this, thank you.

[SETTINGS].log

log.txt

Posted

Here I have attached my Pinballx.ini file hope this helps and as far as putting /STAYINRAM I'm not sure where you want me to put this command. In the command line of PinballX desktop shortcut or in PinballX setting where it loads future Pinball and has the following comman line /open "[TABLEPATH]\[TABLEFILE]" /play /exit /arcaderender in the parameter for FPLoader.exe as I'm using BAM exe for future pinball. If I use BAM without PinballX it works fine but for some reason When exiting table it crashes to desktop. Check my Log file to see complete error. Thanks for the response both of you acted fast. Will check on this tommorrow after work if you guys have responded.

PinballX.ini

Guest
This topic is now closed to further replies.
×
×
  • Create New...