Table is hidden by Black Screen

[LahaBo]

Hello,

I have a problem with the Pinball Arcade FreeCamera Mod.

When I start a Table without PinballX everything is fine.

When I open a Table under PinballX the Playfield only shows a Black Screen. I hear the Sound of the Game and the Backglass can be seen on the 2nd Monitor. Pinball FX2 starts without problems.

If I use Alt+Tab and close the Black Screen Window the Table comes to the Top.

If PinballX is started in Windowed Mode everything is displayed correctly.

I have already tried a lot but can not find the error. All programs are up to date.

Maybe someone can help me.

Thanks,

LahaBo

[BrandonLaw]

I had this same issue with FX3.  It was driving me nuts as I had admin set correctly/fresh installs/ect.  As I do not use FX2, I'm not sure if it has cab support, but in FX3, the cab support being turned on cannot have the rotation also enabled from within PBX.  Turn off the rotation in PBX and your focus will return.  I hope this helps!

[LahaBo]

Thank you for your answer.

Unfortunately, that does not work for me.

I deactivated the rotation for FX2, this game does not cause any problems.

For Pinball Arcade you can not adjust the rotation in PinballX.

I have already reinstalled everything, without success.

Admin rights for all programms are assigned.

Maybe someone has an idea.

[Draco1962]

Attach copies of your pinballx.ini and log.txt files in reply to your post. You should do this every time you post an issue with the frontend. You should probably be using fullscreen windowed mode anyway. 

[BrandonLaw]

Also, make sure to grab a focus logger.  Definitely a good tool to have with frontend management.

[jeverds]

I have the same problem since the last update

[Draco1962]

9 minutes ago, jeverds said:

I have the same problem since the last update

Same problem. Attach copies of your pinballx.ini and log.txt please.  It does no good to say you have the same issue (which may or may not be the case) without more information about your setup.

[LahaBo]

Fullscreen Windowed Mode does not work too.

Here are my files.

 

 

log.txt

PinballX.txt

[jeverds]

14 hours ago, Draco1962 said:

El mismo problema. Adjunte copias de su pinballx.ini y log.txt por favor. No sirve decir que tiene el mismo problema (que puede o no ser el caso) sin más información sobre su configuración.

My team has not changed anything and with the previous version my version of TPA FRE CAMERA MOD worked perfectly.
After updating to pinball x 3.01 the problem started.
Sorry for my english

[SETTINGS] VER 3.01.log

log VER 3.01.txt

PinballX VER 3-01.ini

[SETTINGS] EARLIER VERSION.log

log EARLIER VERSION.txt

PinballX EARLIER VERSION.ini

[Tom Speirs]

Plesee try the 32 bit install and report back.

[LahaBo]

Have the same problem with the 32bit version.

Even an older version does not fix the error.

[jeverds]

 

3 hours ago, Tom Speirs said:

Plesee try the 32 bit install and report back.

With 32 bit version the fault also occurs.
My last version with which I worked before updating is 2.91.
Between the 2.91 and the 3.01 I have not tried any more.

[Tom Speirs]

1 hour ago, jeverds said:

 

With 32 bit version the fault also occurs.
My last version with which I worked before updating is 2.91.
Between the 2.91 and the 3.01 I have not tried any more.

Maybe Pinball Arcade got an update?

Please try 2.91 again and see if you still have an issue.

Thanks.

Tom.

[jeverds]

36 minutes ago, Tom Speirs said:

Maybe Pinball Arcade got an update?

Please try 2.91 again and see if you still have an issue.

Thanks.

Tom.

I have the latest version of arcade pinball.
With pinball x 2.91 all OK.

[Tom Speirs]

Should be fixed in 3.03

Now available.

[jeverds]

17 hours ago, Tom Speirs said:

Should be fixed in 3.03

Now available.

Working well with version 3.03.

Thanks for your interest

[LahaBo]

Now it works for me.

Thanks a lot.

[guga_nt]

I also had this problem.
Thanks for the update.