luger81 Posted March 23, 2018 Share Posted March 23, 2018 As the title says, when I first launch PinballX, it shows my desktop instead of backglass before launching the first table. Any suggestions? (I attached my .ini) Note: I should mention that the backglass shows up in PBX when I exit the first table. PinballX.ini log.txt Link to comment Share on other sites More sharing options...
Draco1962 Posted March 23, 2018 Share Posted March 23, 2018 Attach your log.txt file. Link to comment Share on other sites More sharing options...
rablack97 Posted March 24, 2018 Share Posted March 24, 2018 does it do it for all tables when you launch pbx, or is the same table showing up every time you launch pbx. try loading a different table, then exiting pbx, restart and see if still wont load you backglass Link to comment Share on other sites More sharing options...
luger81 Posted March 25, 2018 Author Share Posted March 25, 2018 On 3/23/2018 at 1:49 PM, Draco1962 said: Attach your log.txt file. It is attached now. Link to comment Share on other sites More sharing options...
luger81 Posted March 25, 2018 Author Share Posted March 25, 2018 14 hours ago, rablack97 said: does it do it for all tables when you launch pbx, or is the same table showing up every time you launch pbx. try loading a different table, then exiting pbx, restart and see if still wont load you backglass It never used to happen but on first launch of PBX it doesn't show a backglass image (png etc.). I have even Alt+Tab to see if the backglass is running (it's not). After I open a table and exit it, the backglass is there when scrolling through tables and when I Alt+Tab after launching a table the backglass shows (on the correct monitor). Link to comment Share on other sites More sharing options...
rablack97 Posted March 25, 2018 Share Posted March 25, 2018 are you using b2s or static images from the images folder? Link to comment Share on other sites More sharing options...
luger81 Posted April 1, 2018 Author Share Posted April 1, 2018 On 3/24/2018 at 11:22 PM, rablack97 said: are you using b2s or static images from the images folder? B2S Link to comment Share on other sites More sharing options...
rablack97 Posted April 1, 2018 Share Posted April 1, 2018 make this false and see if that makes a difference. AutoPositionB2S=True Link to comment Share on other sites More sharing options...
rablack97 Posted April 1, 2018 Share Posted April 1, 2018 also why is your playfield and backglass set to the same monitor? [Display]Monitor=1 rotate=270 Windowed=False WindowWidth=480 WindowHeight=720 WindowX=0 WindowY=65 PlayFieldBrightness=230 WheelTextColor=ffffffff WheelTextOutlineColor=ff000000 InfoTextColor=ffffffff InfoTextOutlineColor=ff000000 FilterTextColor=ffffffff FilterTextOutlineColor=ff000000 MenuColor=ffffa500 [BackGlass]monitor=1 Link to comment Share on other sites More sharing options...
luger81 Posted April 7, 2018 Author Share Posted April 7, 2018 On 4/1/2018 at 11:14 AM, rablack97 said: also why is your playfield and backglass set to the same monitor? [Display]Monitor=1 rotate=270 Windowed=False WindowWidth=480 WindowHeight=720 WindowX=0 WindowY=65 PlayFieldBrightness=230 WheelTextColor=ffffffff WheelTextOutlineColor=ff000000 InfoTextColor=ffffffff InfoTextOutlineColor=ff000000 FilterTextColor=ffffffff FilterTextOutlineColor=ff000000 MenuColor=ffffa500 [BackGlass]monitor=1 If I move either one then they won't display on the correct ones at all. Monitor 1, Rotate=270 = playfield. I tried to move the backglass to Monitor 2 but it didn't show on the correct one either. I only have a 2 monitor setup. Link to comment Share on other sites More sharing options...
luger81 Posted April 7, 2018 Author Share Posted April 7, 2018 With these settings, the playfield is on the correct monitor but the backglass is behind it (in PinballX only) but when loading a table it puts it on the correct screen. This is definitely a PinballX issue but I don't know where to go from here to make it correct on first launch. Also, I tried AutoPositionB2S=False but it didn't make a difference. [Display] Monitor=1 rotate=270 windowed=False WindowWidth=1600 WindowHeight=900 WindowX=0 WindowY=65 PlayFieldBrightness=230 WheelTextColor=ffffffff WheelTextOutlineColor=ff000000 InfoTextColor=ffffffff InfoTextOutlineColor=ff000000 FilterTextColor=ffffffff FilterTextOutlineColor=ff000000 MenuColor=ffffa500 WheelAutoCrop=True FullScreenWindowed=True [BackGlass] monitor=0 x=0 y=0 width=1600 height=900 AutoPositionB2S=False Link to comment Share on other sites More sharing options...
rablack97 Posted April 7, 2018 Share Posted April 7, 2018 unplug your backglass, boot into vpx, then shut down, plug it back in and reboot. registry display settings may be messed up. Link to comment Share on other sites More sharing options...
Recommended Posts