desktop shown instead of backglass before launching first table

[luger81]

As the title says, when I first launch PinballX, it shows my desktop instead of backglass before launching the first table. Any suggestions?

(I attached my .ini)

Note: I should mention that the backglass shows up in PBX when I exit the first table.

PinballX.iniFetching info...

log.txt

[Draco1962]

Attach your log.txt file.

[rablack97]

does it do it for all tables when you launch pbx, or is the same table showing up every time you launch pbx.  try loading a different table, then exiting pbx, restart and see if still wont load you backglass

[luger81]

  On 3/23/2018 at 6:49 PM, Draco1962 said:

Attach your log.txt file.

Expand  

It is attached now.

[luger81]

  On 3/24/2018 at 2:12 PM, rablack97 said:

does it do it for all tables when you launch pbx, or is the same table showing up every time you launch pbx.  try loading a different table, then exiting pbx, restart and see if still wont load you backglass

Expand  

It never used to happen but on first launch of PBX it doesn't show a backglass image (png etc.). I have even Alt+Tab to see if the backglass is running (it's not). After I open a table and exit it, the backglass is there when scrolling through tables and when I Alt+Tab after launching a table the backglass shows (on the correct monitor).

[rablack97]

are you using b2s or static images from the images folder?

[luger81]

  On 3/25/2018 at 4:22 AM, rablack97 said:

are you using b2s or static images from the images folder?

Expand  

B2S

[rablack97]

make this false and see if that makes a difference.

 

AutoPositionB2S=True

[rablack97]

also why is your playfield and backglass set to the same monitor?

 

[Display]
Monitor=1
rotate=270
Windowed=False
WindowWidth=480
WindowHeight=720
WindowX=0
WindowY=65
PlayFieldBrightness=230
WheelTextColor=ffffffff
WheelTextOutlineColor=ff000000
InfoTextColor=ffffffff
InfoTextOutlineColor=ff000000
FilterTextColor=ffffffff
FilterTextOutlineColor=ff000000
MenuColor=ffffa500
[BackGlass]
monitor=1

[luger81]

  On 4/1/2018 at 4:14 PM, rablack97 said:

also why is your playfield and backglass set to the same monitor?

 

[Display]
Monitor=1
rotate=270
Windowed=False
WindowWidth=480
WindowHeight=720
WindowX=0
WindowY=65
PlayFieldBrightness=230
WheelTextColor=ffffffff
WheelTextOutlineColor=ff000000
InfoTextColor=ffffffff
InfoTextOutlineColor=ff000000
FilterTextColor=ffffffff
FilterTextOutlineColor=ff000000
MenuColor=ffffa500
[BackGlass]
monitor=1

Expand  

If I move either one then they won't display on the correct ones at all. Monitor 1, Rotate=270 = playfield. I tried to move the backglass to Monitor 2 but it didn't show on the correct one either.

I only have a 2 monitor setup.

[luger81]

With these settings, the playfield is on the correct monitor but the backglass is behind it (in PinballX only) but when loading a table it puts it on the correct screen. This is definitely a PinballX issue but I don't know where to go from here to make it correct on first launch. Also, I tried AutoPositionB2S=False but it didn't make a difference.

 

[Display]
Monitor=1
rotate=270
windowed=False
WindowWidth=1600
WindowHeight=900
WindowX=0
WindowY=65
PlayFieldBrightness=230
WheelTextColor=ffffffff
WheelTextOutlineColor=ff000000
InfoTextColor=ffffffff
InfoTextOutlineColor=ff000000
FilterTextColor=ffffffff
FilterTextOutlineColor=ff000000
MenuColor=ffffa500
WheelAutoCrop=True
FullScreenWindowed=True
[BackGlass]
monitor=0
x=0
y=0
width=1600
height=900
AutoPositionB2S=False

[rablack97]

unplug your backglass, boot into vpx, then shut down, plug it back in and reboot.

registry display settings may be messed up.