[RESOLVED] PBX Monitor Assignment Changes on Its Own

[BamBam963]

  I have a three screen cabinet and everything runs great in VPX.  I fire up PBX once and it works great.  I exit PBX and go back in and my backglass is on my DMD screen. Frustrating as hell. I am running two AMD cards. R9 2GB card for the playfield and an R7 for the backglass.  Playfield is on screen 1, backglass is on 2 and DMD is on 3.  It never works consistently.

It works consistently in VPX by itself.

I have all of my monitors side by side in Windows.  Monitors 1 and 2 are in landscape mode and Monitor 3 is in portrait mode so it takes up less realestate between the speakers.  All monitors are numbered 1 to 3 from left to right. 

What I have notived is that the AMD catalyst suite has the monitors assigned to different Identity numbers than Windows does.

B2S Setup sees the monitors the same way Windows does.

PBX keeps switching monitor 2 and 3 around regardless of what is programmed into B2SSetup and SetDMD.

 

 

 

[Draco1962]

Are you running the Gaming Evolved client by Raptr? 

 

[BamBam963]

  On 3/27/2017 at 11:28 AM, Draco1962 said:

Are you running the Gaming Evolved client by Raptr? 

 

Expand  

I read that thread, but thought it was too old to be relevant.  Should I totally ditch the catalyst suite and use vanilla drivers in Win 10 instead?

[Draco1962]

I would start with removing Raptr Evolved first if you have that installed and see if that resolves the issue.

[BamBam963]

That did the trick.  I uninstalled the AMD Suite and let Win10 install the vanilla drivers.

Pinball life is good again.  Now I can go back to growing the hair I pulled out all week. ;-)

[Draco1962]

Glad to hear it is working!