randr Posted March 11, 2014 Share Posted March 11, 2014 running 1.76 but problem started a couple versions earlier... vpinmame is not saving scores, volume or adjustments only when running through pinballx. works fine directly running vp manually. Link to comment Share on other sites More sharing options...
Dna Disturber Posted March 11, 2014 Share Posted March 11, 2014 running 1.76 but problem started a couple versions earlier... vpinmame is not saving scores, volume or adjustments only when running through pinballx. works fine directly running vp manually.So glad you mentioned this....I'm not crazy after allI am testing submitting hiscores from pinballx , using plugin pinemhi leaderboard but every once in a while the score is the same as the previous one.So i kept thinking it was my program that did that......tried it out not using the plugin and indeed....the problem occurs.Maybe the exit method is causing this? Strange thing is it doesn't happen all the time (for me) Link to comment Share on other sites More sharing options...
sjorge Posted March 11, 2014 Share Posted March 11, 2014 This happens to me too.So I hit F3 if I make a highscore, just to be sure it saves. Link to comment Share on other sites More sharing options...
randr Posted March 11, 2014 Author Share Posted March 11, 2014 I can confirm with 100% certainty its a pinballx issue. Tried for hours and is only a problem through frontend. It used to work just fine but couldn't tell you what version broke it...FYI I tried moving vpinmame install, everything is admin rights read write, deleted all nvram files but front end just don't allow saving of nvram. Link to comment Share on other sites More sharing options...
randr Posted March 11, 2014 Author Share Posted March 11, 2014 my juke box also was "broke" around same time I script it to backglass and jukebox is now behind black windowed backglass..again not sure what version broke that either.I should save old versions so I can go back and inform what version works and what version don't so maybe would be easier for tom to find issue. Link to comment Share on other sites More sharing options...
randr Posted March 11, 2014 Author Share Posted March 11, 2014 did some digging around and found version 1.67 and works(50% of time)or less in that version..1.71-1.72 not working.. Link to comment Share on other sites More sharing options...
Draco1962 Posted March 11, 2014 Share Posted March 11, 2014 Please post your pinballx.ini and log.txt files, fellas! Tom will need these. Thanks! Link to comment Share on other sites More sharing options...
randr Posted March 11, 2014 Author Share Posted March 11, 2014 ini file[Display]Monitor=0rotate=270Windowed=FalseWindowWidth=480WindowHeight=720WindowX=0WindowY=65PlayFieldBrightness=230WheelTextColor=ffffffffWheelTextOutlineColor=ff000000InfoTextColor=ffffffffInfoTextOutlineColor=ff000000FilterTextColor=ffffffffFilterTextOutlineColor=ff000000FullScreenWindowed=False[backGlass]monitor=1x=12y=10width=1280height=1024[DMD]Enabled=Falsemonitor=2x=0y=0width=900height=300[interface]DesktopModeEnabled=False[Audio]StreamVolume=10SampleVolume=10PlaySoundInVideos=False[startup]playsound=Falseplayvideo=False[KeyCodes]quit=27left=160right=161select=13rotate=84pageleft=49pageright=53exitemulator=27ingame=80screenshot=83screenshotbackglass=86instructions=73[JoyCodes]quit=10left=0right=1select=2rotate=pageleft=4pageright=5exitemulator=6ingame=13[Text]Line1=You unlock this pinball with the key of imaginationLine2=Press flipper buttons to scroll through games[FuturePinball]Enabled=TrueWorkingPath=C:\Games\Future Pinball\BAMTablePath=C:\Games\Future Pinball\TablesExecutable=FPLoader.exeParameters=/open "[TABLEPATH]\[TABLEFILE]" /play /exit /arcaderender /STAYINRAMLaunchBeforeEnabled=falseLaunchBeforeWorkingPath=LaunchBeforeExecutable=notepad.exeLaunchBeforeHideWindow=FalseLaunchBeforeWaitForExit=TrueLaunchAfterEnabled=FalseLaunchAfterWorkingPath=LaunchAfterExecutable=notepad.exeLaunchAfterHideWindow=FalseLaunchAfterWaitForExit=TrueMouseClickFocus=True[VisualPinball]Enabled=TrueWorkingPath=C:\Program Files (x86)\Visual PinballTablePath=C:\Program Files (x86)\Visual Pinball\TablesExecutable=VPinball.exeParameters=/play -"[TABLEPATH]\[TABLEFILE]"LaunchBeforeEnabled=FalseLaunchBeforeWorkingPath=C:\PinballX\Plugins\QuickLaunchLaunchBeforeExecutable=LaunchBeforeHideWindow=FalseLaunchBeforeWaitForExit=TrueLaunchAfterEnabled=TrueLaunchAfterWorkingPath=C:\PinballXLaunchAfterExecutable=ledclear.batLaunchAfterHideWindow=FalseLaunchAfterWaitForExit=FalseLaunchAfterParameters=NVRAMPath=C:\Program Files (x86)\Visual Pinball\vpinmame\nvram[ExitScreen]Enabled=TrueEnableExit=TrueEnableShutdown=True[startupProgram]Enabled=falseWorkingPath=Executable=notepad.exeParamaters=HideWindow=trueWaitForExit=false[ExitProgram]Enabled=falseWorkingPath=Executable=notepad.exeParamaters=HideWindow=FalseWaitForExit=[AttractMode]Enabled=TrueTimer=2ShowFor=30[system_1]Name=Pinball FX2Enabled=TrueWorkingPath=C:\Program Files (x86)\Microsoft Game Studios\Pinball FX2TablePath=Executable=Pinball FX2.exeParameters=-applaunch 226990LaunchBeforeEnabled=TrueLaunchBeforeWorkingPath=C:\PinballX\ScriptsLaunchBeforeExecutable=PinballFX2.exeLaunchBeforeHideWindow=FalseLaunchBeforeWaitForExit=FalseLaunchAfterEnabled=FalseLaunchAfterWorkingPath=LaunchAfterExecutable=notepad.exeLaunchAfterHideWindow=FalseLaunchAfterWaitForExit=TrueLaunchBeforeParameters=[TABLEFILE]LaunchAfterParameters=[Plugin_1]Enabled=FalseName=PlugInSpeech.dll[setupWizard]EmuPath1=C:\EmulatorsAssetPath1=C:\AssetsRomPath1=C:\RomsDefaultPathPrompt=TrueDownloadDatabasePrompt=TrueDownloadEmulatorPrompt=TrueWizardMode=0CustomArray=SearchArray=SavePosition=FalseSectionIndex=0SearchText=EmulatorIndex=0EmulatorGroupIndex=0DaphneIndex=0HTMLAppsIndex=0ExternalAppsIndex=0RadioStationsIndex=0NewsFeedsIndex=0MappedDrivesIndex=0SystemIndex=1ShowPanel=TrueFontSize=1WindowState=0WindowSize=1183,787WindowLocation=85,103[internal]lastselected=Medieval MadnessMedieval-Madness_VP91x_2.4.3FSVisualPinballfilter_year=filter_company=filter_custom=Visual Pinballfiltername=Visual Pinball Tables[Plugin_2]Enabled=FalseName=QuickLaunch (PinballX Edition).dll[Plugin_3]Enabled=FalseName=Xpadder Plugin.dll[system_2]Name=JukeboxEnabled=TrueWorkingPath=C:\Program Files (x86)\Visual PinballTablePath=C:\Program Files (x86)\Visual Pinball\TablesExecutable=newjuke.exeParameters=LaunchBeforeWorkingPath=C:\PinballXLaunchBeforeExecutable=jukebox.batLaunchBeforeParameters=LaunchAfterExecutable=LEDBlinky.exe 2LaunchBeforeEnabled=TrueLaunchBeforeWaitForExit=FalseLaunchBeforeHideWindow=FalseLaunchAfterWorkingPath=C:\PinballX\LEDBlinkyLaunchAfterParameters=LaunchAfterEnabled=False[system_3]Name=mameWorkingPath=C:\PinballX\mameplusTablePath=C:\PinballX\mameplusExecutable=mamep.exeLaunchBeforeWorkingPath=LaunchBeforeExecutable=Enabled=TrueParameters=[TABLEFILE]LaunchBeforeParameters=LaunchAfterExecutable=LaunchAfterWorkingPath=[system_4]Name=Visualpinball2Enabled=TrueWorkingPath=C:\Program Files (x86)\Visual PinballTablePath=C:\Program Files (x86)\Visual Pinball\TablesExecutable=VPinball.exeParameters=/play -"[TABLEPATH]\[TABLEFILE]"LaunchBeforeWorkingPath=C:\PinballX\Plugins\QuickLaunchLaunchBeforeExecutable=LaunchBeforeParameters=LaunchAfterExecutable=ledclear.batLaunchAfterEnabled=TrueLaunchAfterWorkingPath=C:\PinballX[system_5]Name=laserWorkingPath=c:\DRAGONS LAIRTablePath=c:\DRAGONS LAIRExecutable=Lair.batParameters=[TABLEFILE]Enabled=TrueLaunchBeforeWorkingPath=c:\DRAGONS LAIRLaunchBeforeExecutable=Lair.batLaunchBeforeParameters=LaunchAfterExecutable=LaunchBeforeEnabled=TrueLaunchBeforeWaitForExit=TrueLaunchBeforeHideWindow=FalseLaunchAfterWorkingPath=[Login]Enabled=False[system_6]Name=The Pinball ArcadeWorkingPath=C:\Program Files (x86)\FarSight Studios\The Pinball ArcadeTablePath=Executable=PinballArcade.exeLaunchBeforeWorkingPath=C:\PinballX\ScriptsLaunchBeforeExecutable=The Pinball Arcade.exeParameters=-applaunch 238260LaunchBeforeParameters=[TABLEFILE]LaunchAfterExecutable=The Pinball Arcade.ahkLaunchBeforeEnabled=TrueLaunchBeforeWaitForExit=FalseLaunchBeforeHideWindow=FalseEnabled=TrueLaunchAfterEnabled=FalseLaunchAfterWorkingPath=C:\PinballX\ScriptsLaunchAfterParameters=[TABLEFILE]LaunchAfterWaitForExit=FalseLaunchAfterHideWindow=False[system_7]Name=NEW VP DX9Enabled=TrueWorkingPath=C:\Program Files (x86)\Visual PinballExecutable=VP9DX9.exeParameters=/play -"[TABLEPATH]\[TABLEFILE]"LaunchBeforeWorkingPath=LaunchBeforeExecutable=LaunchBeforeParameters=LaunchAfterWorkingPath=C:\PinballXLaunchAfterExecutable=ledclear.batLaunchAfterParameters=TablePath=C:\Program Files (x86)\Visual Pinball\TablesLaunchAfterEnabled=TrueLaunchAfterWaitForExit=FalseLaunchAfterHideWindow=Falseloglog 01:03:11.4 3/12/2014: PinballX - Version 1.7601:03:11.4 3/12/2014: Loading Settings01:03:11.4 3/12/2014: Initialize Component01:03:11.4 3/12/2014: Initialize Display01:03:11.4 3/12/2014: Loading PlugIns01:03:11.6 3/12/2014: Created DirectX BackGlass Window01:03:11.6 3/12/2014: Hiding Cursor01:03:11.7 3/12/2014: Hiding Taskbar01:03:11.7 3/12/2014: Load Game List01:03:11.7 3/12/2014: Loading Database: Future Pinball01:03:11.7 3/12/2014: Loading Database: Visual Pinball01:03:11.7 3/12/2014: Loading Database: Pinball FX201:03:11.7 3/12/2014: Loading Database: Jukebox01:03:11.7 3/12/2014: Loading Database: mame01:03:11.7 3/12/2014: Loading Database: laser01:03:11.7 3/12/2014: Loading Database: The Pinball Arcade01:03:11.7 3/12/2014: Loading Database: NEW VP DX901:03:11.7 3/12/2014: Loading Custom Database: Visual Pinball 201:03:11.7 3/12/2014: Finding and matching artwork and videos01:03:24.5 3/12/2014: Loading Game Statistics and Scores01:03:24.9 3/12/2014: Initialize Audio01:03:24.9 3/12/2014: Set Keyboard Controls01:03:24.9 3/12/2014: Initialize Joystick01:03:24.9 3/12/2014: 1 Joystick Attached01:03:24.9 3/12/2014: Started01:03:53.8 3/12/2014: Launch System01:03:53.8 3/12/2014: Waiting for threads01:03:53.8 3/12/2014: Disposing display01:03:55.1 3/12/2014: C:\Program Files (x86)\Visual Pinball\VPinball.exe /play -"C:\Program Files (x86)\Visual Pinball\Tables\Medieval-Madness_VP91x_2.4.3FS.vpt"01:03:55.1 3/12/2014: C:\PinballX\vpauto.exe01:04:00.4 3/12/2014: Found PinMAME ROM: mm_10.nv01:04:23.9 3/12/2014: Exit System Control Pressed01:04:26.6 3/12/2014: C:\PinballX\ledclear.bat01:04:26.8 3/12/2014: Created DirectX BackGlass Window01:04:29.4 3/12/2014: Launch System01:04:29.4 3/12/2014: Waiting for threads01:04:29.4 3/12/2014: Disposing display01:04:30.7 3/12/2014: C:\Program Files (x86)\Visual Pinball\VPinball.exe /play -"C:\Program Files (x86)\Visual Pinball\Tables\Medieval-Madness_VP91x_2.4.3FS.vpt"01:04:30.7 3/12/2014: C:\PinballX\vpauto.exe01:04:36.0 3/12/2014: Found PinMAME ROM: mm_10.nv01:04:44.7 3/12/2014: Exit System Control Pressed01:04:47.4 3/12/2014: C:\PinballX\ledclear.bat01:04:47.9 3/12/2014: Created DirectX BackGlass Window01:04:49.8 3/12/2014: Exiting01:04:49.9 3/12/2014: Showing Taskbar01:04:49.9 3/12/2014: Unhiding Mouse Cursor01:04:49.9 3/12/2014: Disposing Plugins01:04:49.9 3/12/2014: Saving Settings Link to comment Share on other sites More sharing options...
sjorge Posted March 11, 2014 Share Posted March 11, 2014 loglog.txtiniPinballX.ini Link to comment Share on other sites More sharing options...
Les73gtx Posted March 14, 2014 Share Posted March 14, 2014 Just to add a comment to this ... I have only been using PinX since 1.74 but the way that it shuts down VP is not working correctly as it does not allow DOF to exit properly meaning that VP was not shut down correctly. This means that the command to kill the LedWiz, that comes from DOF, never happens and so whatever toys were running when you exited the table back to PBX continue to run until the next table is selected. If you run only VP this works correctly by hitting the "Q" 2 times. Not to hijack the thread but these two are linked issues and also after reading this I tested again and only 25% of the time the high score saves. Out of 10 games played and high scores made 2 of them saved. All 5 games only in VP saved just fine. I would like to see this fixed as this is the second time I have posted about VP not exiting correctly even though the Frontend works fine. Link to comment Share on other sites More sharing options...
nullPointer Posted March 14, 2014 Share Posted March 14, 2014 It's basically a forgone conclusion that Tom will see this thread, and followup accordingly with due diligence. In the meantime I would urge patience. I appreciate that this issue may have been reported on more than one occasion, but bear in mind that PinballX is maintained by a single person and that he supports several software projects simultaneously in addition to having a full time job. Tom can only work so quickly no matter how entitled anyone may feel that he respond instantly to bug reports. Link to comment Share on other sites More sharing options...
Les73gtx Posted March 14, 2014 Share Posted March 14, 2014 I was not rushing at all and in fact Tom took time for me a couple weeks ago to figure out a stupid mistake I made. Heck, I am probably wrong about this also but it was related so I wanted to report my findings. Great work and thanks Tom Link to comment Share on other sites More sharing options...
Draco1962 Posted March 14, 2014 Share Posted March 14, 2014 I was not rushing at all and in fact Tom took time for me a couple weeks ago to figure out a stupid mistake I made. Heck, I am probably wrong about this also but it was related so I wanted to report my findings. Great work and thanks TomLes, i f you don't mind, please post your pinballx.ini and log.txt files so Tom can have a more complete sampling. Thanks! Link to comment Share on other sites More sharing options...
Tom Speirs Posted March 14, 2014 Share Posted March 14, 2014 Is this just when exiting via in game? Link to comment Share on other sites More sharing options...
randr Posted March 14, 2014 Author Share Posted March 14, 2014 I never thought about it as I use a clear script but les is correct ledwiZ does leave ports on when exiting in pinballx so maybe VRAM not saving is related! As both nvram and ledwiz clear when running vp direct. Link to comment Share on other sites More sharing options...
Tom Speirs Posted March 14, 2014 Share Posted March 14, 2014 I think it just needs a delay waiting for VP for close but I am not even sure it is possible to close VP without killing it. If it is something that used to work though there is hope!See if the attached is any better,PinballX.zip Link to comment Share on other sites More sharing options...
Dna Disturber Posted March 14, 2014 Share Posted March 14, 2014 Isn't it possible to send the close vp and wait till vpm window has been closed and then go on with the rest of the actions?That would ensure that vpm closes correctly. Link to comment Share on other sites More sharing options...
randr Posted March 14, 2014 Author Share Posted March 14, 2014 I think it just needs a delay waiting for VP for close but I am not even sure it is possible to close VP without killing it. If it is something that used to work though there is hope!See if the attached is any better,no change for me... i tried with and without clear script and still no nvram save. Is odd really....how does hyperpin differ from pinballx when it closes VP? Link to comment Share on other sites More sharing options...
Dna Disturber Posted March 15, 2014 Share Posted March 15, 2014 no change for me... i tried with and without clear script and still no nvram save. Is odd really....how does hyperpin differ from pinballx when it closes VP?I can remember they had problems using the esc button...maybe you could try mapping the exit to another key?For instance the e button... Link to comment Share on other sites More sharing options...
randr Posted March 15, 2014 Author Share Posted March 15, 2014 I am using "e" maybe I should try "esc" instead? Lol heck can't hurt to try Link to comment Share on other sites More sharing options...
Dna Disturber Posted March 15, 2014 Share Posted March 15, 2014 I am using "e" maybe I should try "esc" instead? Lol heck can't hurt to tryWell that can't be it then I am using esc and have the same problemCouldn't test it myself as i was at work... Link to comment Share on other sites More sharing options...
randr Posted March 15, 2014 Author Share Posted March 15, 2014 I tried "e", "esc" both ways and same result nvram just will not save. I wonder if its just a win7 issue? "e" or"esc" running vp direct saved nvram either way Link to comment Share on other sites More sharing options...
Les73gtx Posted March 15, 2014 Share Posted March 15, 2014 sorry this is late but I had a couple of errors with these logs I am postingLog03:13:05.1 3/15/2014: PinballX - Version 1.7603:13:05.1 3/15/2014: Loading Settings03:13:05.2 3/15/2014: Initialize Component03:13:05.3 3/15/2014: Initialize Display03:13:07.5 3/15/2014: Start with windows is set so waiting 5 seconds. Boot Time = 3/15/2014 3:12:55 AM03:13:15.0 3/15/2014: Loading PlugIns03:13:15.9 3/15/2014: Created DirectX BackGlass Window03:13:15.9 3/15/2014: Created DirectX DMD Window03:13:16.0 3/15/2014: Hiding Cursor03:13:16.1 3/15/2014: Hiding Taskbar03:13:16.1 3/15/2014: Start with windows is set so waiting 5 seconds03:13:21.1 3/15/2014: Loading Font03:13:21.1 3/15/2014: Load Game List03:13:21.1 3/15/2014: Loading Database: Visual Pinball03:13:21.2 3/15/2014: Loading Database: Pinball FX203:13:21.2 3/15/2014: Loading Database: Mame6403:13:21.2 3/15/2014: Loading Custom Database: Zen FX203:13:21.2 3/15/2014: Finding and matching artwork and videos03:13:21.4 3/15/2014: Loading Game Statistics and Scores03:13:21.9 3/15/2014: Initialize Audio03:13:22.2 3/15/2014: Set Keyboard Controls03:13:22.2 3/15/2014: Initialize Joystick03:13:22.3 3/15/2014: No Joysticks Attached03:13:22.3 3/15/2014: Started03:14:56.3 3/15/2014: Launch System03:14:56.3 3/15/2014: Waiting for threads03:14:56.3 3/15/2014: Disposing display03:14:58.3 3/15/2014: C:\Program Files (x86)\Visual Pinball\VPinball.exe /play -"C:\Program Files (x86)\Visual Pinball\Tables\Attack from Mars 9.2.vpt"03:14:58.3 3/15/2014: C:\PinballX\vpauto.exe03:15:05.7 3/15/2014: Found PinMAME ROM: afm_113b.nv03:16:12.1 3/15/2014: Created DirectX BackGlass Window03:16:12.2 3/15/2014: Created DirectX DMD Window03:16:13.8 3/15/2014: Exit System Control Pressed03:16:17.7 3/15/2014: C:\LedWiz\Ledwiz87.exe03:16:18.0 3/15/2014: Created DirectX BackGlass Window03:16:18.0 3/15/2014: Created DirectX DMD Window03:16:32.3 3/15/2014: Exiting03:16:32.4 3/15/2014: Showing Taskbar03:16:32.4 3/15/2014: Unhiding Mouse Cursor03:16:32.4 3/15/2014: Disposing Plugins03:16:32.4 3/15/2014: Saving Settings03:16:32.4 3/15/2014: Waiting for Online Thread.ini[Display]Monitor=0rotate=270Windowed=FalseWindowWidth=480WindowHeight=720WindowX=0WindowY=65PlayFieldBrightness=230WheelTextColor=ff2d2dffWheelTextOutlineColor=ff00ff00InfoTextColor=ff400080InfoTextOutlineColor=ff00ff00FilterTextColor=ff0000ffFilterTextOutlineColor=ff00ff00MenuColor=ff0000ff[backGlass]monitor=1x=0y=0width=1360height=768[DMD]Enabled=Truemonitor=2x=25y=115width=750height=375[FileSystem]EnableFileMatching=False[interface]DesktopModeEnabled=FalseEnableAdditionalDetail=TrueShowSystem=TrueShowRatings=True[Audio]StreamVolume=40SampleVolume=50PlaySoundInVideos=True[startup]playsound=Falseplayvideo=TrueStartWithWindows=Yes[KeyCodes]quit=27left=160right=161select=49rotate=82pageleft=90pageright=191exitemulator=81ingame=69screenshot=83screenshotbackglass=66instructions=73[JoyCodes]quit=left=right=select=rotate=pageleft=pageright=exitemulator=ingame=instructions=[Text]Line1=<< Use Flippers to Scroll >>Line2=Press Start to Select Game[FuturePinball]Enabled=FalseWorkingPath=TablePath=Executable=Parameters=LaunchBeforeEnabled=falseLaunchBeforeWorkingPath=LaunchBeforeExecutable=LaunchBeforeHideWindow=FalseLaunchBeforeWaitForExit=FalseLaunchAfterEnabled=FalseLaunchAfterWorkingPath=LaunchAfterExecutable=LaunchAfterHideWindow=FalseLaunchAfterWaitForExit=FalseMouseClickFocus=TrueFPRAMPath=[VisualPinball]Enabled=TrueWorkingPath=C:\Program Files (x86)\Visual PinballTablePath=C:\Program Files (x86)\Visual Pinball\TablesExecutable=VPinball.exeParameters=/play -"[TABLEPATH]\[TABLEFILE]"LaunchBeforeEnabled=falseLaunchBeforeWorkingPath=LaunchBeforeExecutable=LaunchBeforeHideWindow=FalseLaunchBeforeWaitForExit=FalseLaunchAfterEnabled=TrueLaunchAfterWorkingPath=C:\LedWizLaunchAfterExecutable=Ledwiz87.exeLaunchAfterHideWindow=TrueLaunchAfterWaitForExit=FalseNVRAMPath=C:\Program Files (x86)\Visual Pinball\VPinMame\nvram[ExitScreen]Enabled=TrueEnableExit=TrueEnableShutdown=True[startupProgram]Enabled=FalseWorkingPath=Executable=Paramaters=HideWindow=FalseWaitForExit=false[ExitProgram]Enabled=FalseWorkingPath=Executable=Paramaters=HideWindow=FalseWaitForExit=False[AttractMode]Enabled=TrueTimer=1ShowFor=30[system_1]Name=Pinball FX2Enabled=TrueWorkingPath=C:\Program Files (x86)\SteamTablePath=Executable=Steam.exeParameters=-applaunch 226980LaunchAfterEnabled=FalseLaunchAfterWorkingPath=LaunchAfterExecutable=LaunchAfterWaitForExit=FalseLaunchAfterHideWindow=FalseLaunchBeforeEnabled=TrueLaunchBeforeWorkingPath=C:\PinballX\ScriptsLaunchBeforeExecutable=PinballFX2.exeLaunchBeforeParameters=[TABLEFILE]LaunchBeforeWaitForExit=FalseLaunchBeforeHideWindow=False[system_2]Name=Mame64Enabled=TrueWorkingPath=D:\MameTablePath=D:\Mame\romdummyExecutable=mame64.exeParameters=[TABLEFILE]LaunchBeforeWorkingPath=LaunchBeforeExecutable=LaunchBeforeParameters=[AutoExit]Enabled=TrueMinutes=10[internal]lastselected=AvengersAvengersVisualPinballfilter_year=filter_company=filter_custom=filtername=Tables[setupWizard]EmuPath1=C:\EmulatorsAssetPath1=C:\AssetsRomPath1=C:\RomsDefaultPathPrompt=TrueDownloadDatabasePrompt=TrueDownloadEmulatorPrompt=TrueWizardMode=1CustomArray=SearchArray=SavePosition=FalseSectionIndex=18SearchText=EmulatorIndex=0EmulatorGroupIndex=0DaphneIndex=0HTMLAppsIndex=0ExternalAppsIndex=0RadioStationsIndex=0NewsFeedsIndex=0MappedDrivesIndex=0SystemIndex=1ShowPanel=TrueFontSize=1WindowState=0WindowSize=1168,852WindowLocation=543,46Exit is still mapped to esc for me in PinX and VP exits using "Q" I have not tried the new exe you posted Tom ... I will tomorrow ... it is late here. Link to comment Share on other sites More sharing options...
randr Posted March 15, 2014 Author Share Posted March 15, 2014 Interesting. We all have vpinmame in programs folder...while it works fine from vp direct I wonder if pinballx has a problem writing to program folder of windows? Link to comment Share on other sites More sharing options...
Tom Speirs Posted March 15, 2014 Share Posted March 15, 2014 I think I have fixed it and provided a better solution. I also noticed the playfied video freezing up after launching a few tables which hopefully is fixed now too.Please try the attached. As always on some OS's PinballX needs to run as admin.PinballX.zip Link to comment Share on other sites More sharing options...
Recommended Posts