kezza

its strange, yes i did mean save and exit. ahhh im not 100% sure on how to do a log file, and its only going to show a log of my setting with say not led button input setting and the dude and chick turned on! like i was saying the box that holds the settings is full its not cut off, i will try and change res, i hate doing cause if its a res my arcade screen cant handle its a nightmare! lol i will do a log file if it helps! thanks kezza

you know in the screen shot of inside the setting of the led plugin on the mapping part? will on the screen shot down the bottom of the screen it has a save button and cancel! mine does not have that option! i just dont know why?

man, im getting sick of this plugin crap!! lol i have tried my ass off, have updated to the latest gameex, latest plugin , and still IT WONT SAVE MY SETTINGS. i turn off the spazzo saying MAMMEEE, and the stupid chick talking crap. then reload gameex and damm the crap is turned back on and all my mapping for my buttons have been wiped! im going out of my bloody mind! WTF is going on!!!! oh im using pac led.

well just about all sorted with it all apart from the other emulators such as the snes and sega gen. I can get the project64 to boot and run its roms but for some reason i cant boot trough gammex. the workning path is correct. the rom path is correct for the command line i put in the znesw.exe"[ROMpath]\[RomFile]" But for some reason it will 1. go black, and just open the emulator. or with adding the command line znesw.exe"[ROMpath]\[RomFile]" it will go black, the auto exit back to gammex. I have tried hiding desktop, showing desktop. in the set up for gameex it says at the end it is all ok. apart from little things like box art path but that should change anything. like i said the only emulator that works is the n64 one, the sness, gen, and dega dont boot the roms.. WHYYY OH TELL ME WHY???????????? kezza

ahhhh yeah yeah you are the man... now how easy was that.... hahahha i was mucking around with all this other crap going out of my mind... and all i had to do was install this codec pack... does the big boss know he should be using this pack you listed as it works better? Anyway thanks HEAPSSSSSS. kezza

Thanks alot headkaze, i will give that ago for sure. and ill let you know how i go

hey guys. Iam having a bit of trouble getting the game ex to go into videos and use the small snap video. it works then if you go down to the next vid it fully dies and quits gameex and wont leave me a log file worth showing. i have turned off alpha blend videos, that didnt work. I also have the ffdshow installed so its not that. turned off advanced graphics, made not difference. i even deleted some of the video clips that made it crash. I just dont know what else to do???? Any ideas??? kezza

hahaha, yeah the steel legs may cause a bit of damage to the tiles. and i would get shot. what do you think? lcd so it can be stood up like it kinda is... or go for the native real screen?

Well i got the Gameex logo sign made up and fitted in just nice, There will be some flashing to go around it to make it all neat. the sides are painted up and vents in, a cooling fun has been fitted to the inside to get more air flow. neon tube behind the gameex bezel ahhh soon as i get this bullshit 29" arcade screen power problems sorted i can get started on the top and fitting the other screen. Im honestly not too sure if i want to use the 20" screen in the flat top. its just so small.. and i kinda like how i could have a flip up screen so your not looking over the table.. hmmmmm but the lcd has crap res, and i really like true native res what do you think?

hey quys, I finally got my 2nd hand toei 29" arcade screen. i had a good look at the chassis to check it all out.. looks ok, some parts look a little rusty. No idea why, but it was tested b4 it was sent out to me and it was fine. My question is. because i cant find crap all on the net about this screen toei TC-L292 . its power harnes is a 5 pin. they are as follows WHITE, GREY, GREEN, YELLOW, BROWN. I have kinda worked out. WHITE= AC live? GREY= AC NEUTRAL? iS maybe one of them a trigger to turn it on?

lol bkenobi, a few people have said that to me... its got alot more, my wife didnt really show them all but im sure you get the gist of it... i had a look at rope light, tempest. but i kinda think full costom led lighting. i was thinking of maybe neatly run one set of 6 core with a common ground and made chassers to do exactly what the buttons do.. hmm I got the sides all painted up black with sexy sparkles through the 2pac clear. mounted the lock and fitted the chrome air vents... If anyone needs some of the nice little chrome vents i have a heap spare. they are like 70mm wide by 40mm heigh. im still unsure how i am going to attack this top. as in mounting it neatly and making some sort of bezel for it... I shall take some pics.

HAHAHA you know i was thinking about doing that... lol but not 2.1 mil colour led deals. lol was thinking of just clear white or maybe a nice blue led glowing from under the lid onto the floor. ORRRRR even cooler, take longer but make it so the leds will chase and do pattens around the table its self ... hmmmm the cogs are turning.... lol, but tomoros work on it is to paint undercoat and spray the sides, and fit the exhaust fun and grills.. With the leds i would have to use the square 4 pin ones, and not 3mm or 5mm types due to mounting... hmmm ya got me thinking now.. yeah my car is stupid with leds. i should put up a link of it..... CHECK OUT THIS LOL KEZZA

thanks tempest, getting their... just have to cut a few holes for the chrome air vents and mount a decent size extraction fan behind it. and undercoat the sides and base coat them black, an clear coat it with 2pac with prismatic flakes through it! "HAHAHA" may be hard to see for sure. bkenobi

Have done a little more on the arcade machine. mostly waiting on parts... The i-pac new ver came, and i fitted that to the underside of the mbf, and wired it up to the 2 joysticks and the 6 blue light up buttons that have been set up in mortal kombat config just the way i want. The 3 res ones on player 1 side are the escape, tab, and ~ button, The power button on the front side is directly wired into the pc as the power button as well as the led output from the pc. ah, the escape red button it wired to the dard drive light , looks cool when things are loading up and i can keep an eye on how busy it all is.. All the other buttons i have wired up to a scann stick controller, so yeah a few hours of noting each wire to each led nd then wiring it up so it looks sweet and mirrored to the player 2 side. i went with a 50w speaker setup with 8" sub that is mounted inside the machine, I mounted the speakers into the front so its easy to turn up and down the volume with out having to go through windows you know, slow and not instant as you want it! The Video card came, and i installed that one, i went with a ATI radeon M9200 PCI-e but i have a Arcade VGA card, but that one is going into the other machine cause its getting the bigger arcade screen and chassie.. and the sit down machine will get the 20 inch arcade screen thats in the stand up one.

hey guys i have just got my self 3 NAMCO NPC-106 blue light guns. It has a USB male plug and a male av plug! Now my question is this, I plug it into my arcade machine or my laptop and it looks for instalation software. But I do not have any, i search the internet and no one has such a thing. Im sure someone has one of the guns i have and the software and the know how to make this work. I just really want to get on and shoot some stuff, lol Please anyone advice needed badly Thanks kezza

hello, just a strange question, i have put the codex thing on ages ago and have been able to select move and watch the vid clips for ablout 3 months.. but now all of a sudden when i go to watch something it plays then says gameex has had a problem and needs to close!!!!!!! unsure why this is, i have not changed anything at all, and now it doesnt want to be good! any ideas?

hey brian, that sounds like the shot! i got a dosbox ver 0.72 and ya have to do all the old school mount drive files! lol i will try and find this wizard, because i would be very happy if i was able to still run gameex and be able to jump directly into those old games without too much hastle.. thanks heaps for the advise, ill let you know how i go? oh, is their something in the gameex set up for dos box emulation? ta kezza

i just found a great site, that has a lot of the old abandonware games, they are all complete games ziped up! this is the game im trying to get to work, but all seem to give me the same problems Leisure_Suit_Larry_1_In_-_The_Land_Of_The_Lounge_Lizards_(VGA) my stupid question i have vista and i have tryed a few things to get them to work like run in windows 98 mode ect, but it keeps giving me a box titled 16 bit ms-dos subsystem This system does not support fullscreen mode. choose'close' to terminate the application! if i ignore a few times it has an app crash of NTVDM.EXE has stopped working! Problem Event Name: APPCRASH Application Name: ntvdm.exe Application Version: 6.0.6001.18000 Application Timestamp: 47918baf Fault Module Name: StackHash_1703 Fault Module Version: 0.0.0.0 Fault Module Timestamp: 00000000 Exception Code: c0000005 Exception Offset: 00009f1e OS Version: 6.0.6001.2.1.0.256.6 Locale ID: 3081 Additional Information 1: 1703 Additional Information 2: 2264db07e74365624c50317d7b856ae9 Additional Information 3: 1344 Additional Information 4: 875fa2ef9d2bdca96466e8af55d1ae6e any help would be great, it never was hard to play the good old pc games on the 486 back in the day!!!! i hate VISTAAAAA

looking good man, love it!!!!

well, hello guys! i couldnt help my self and had to start another build! I think its something about building them up and its real cool once you have made something like this! Anyway its a table top cab, that ill sneak into the lounge room while the wife is at work,! lol she really didnt want any of my arcade stuff making its way out of my chill out room, what ever ya wanna call it! but gezzzz it would be so much better when i have to sit out in the longe and watch borrrring old tv with her... just flick on the power and ill be having fun in no time. hahhahah ok, so i have decided to build a sub frame out of 3mm alloy box section , just to give it that real strength.. it may get bashed around buy persons un named! haha I have not gone from any original plans for this, so its all measure..... think.... look......measure maybe again! then cut! This is some of the computer thats going to be mounted inside. its a dell pen4 so it will have enough grunt for the normal kind of games i want to have playing! so this is the front side with the controll section, i made a 65mm front flap so you can get to the keyboard and mouse. it has its own compartment so it wont go slipping down into the cab! and thats with the flap down! thays all i can show for the moment, 3 afternoons of work... alot more to come! oh and thats my cat being fully lazy

i went and got a arcade screen and chassie, so no need for the cruddy lcd screen now! Thanks

that is unreal... love it:) should look mad when your finished! like said its like a work of art.... kezza

this is my long lost love, the mk2 dedicated cab! only thing its missing is working coin mecks my build up, never built one b4, but i gave it a go!

hey guys, well i just installed a new better video card and some how.... i dont know how, but the problems with the controll freezing up has gone and every single game now works correctly! YAY, hahaha macines that have so many settings and not just how to say read only are a hand full to keep the way you want... im kinda gugged cause the arcade screen i got is only a 21" and it looks so small to my mortal kombat 2 machine, but hey its heaps better looking at native res than a flat lcd dcreen with yucky pixles and stretching ect ect ect.... thanks for the help tho guys... kezza

i checked the log file, and it all looks ok! i think anyway, i will pasted it over and see what you think.