kevo420

Yeah, should have tried this before editing and posting the config... Thanks, the 'up' line is what was messing it up, didn't notice it because of the length in comparison to everything else.

Sorry for the delay..been held up, here's the ZSNES V6 Config... I've tried the MapGamepadExit on the configs each emulator is using with no joy # This is an advanced emulator configuration file. It does things such as allow keyboard only emulators to be operated by a gamepad, wait for additional processes to exit and map keys. If this file is used it overrides the MAPKeys setting for the emulator. [GENERAL] # Enabled. Use this. Enabled=True #Make MCE Back button and X-ARCADE Escape and SlikStik Escape to close emulator process MapBack=True #Make Escape key close emulator process MapEscape=True #When exiting an emulator via the above mappings, you can specify keys in the send keys format to send instead of having GameEx close the process to cleanly exit the emulator. Such as the Q Key or ALT F4 which is %{F4} KeysToSendOnExit=q #Wait for keys to be processed by the emulator EmuWaitForKeys=False #Additional processes to wait to exit or close on exit. Dont include the .exe. Leave blank not to use. Process1= Process2= Process3= Process4= [JOYMAPPING] # For mapping a GamePad to keys # Specify a virtual key code to send when the specific joystick control is pressed. Look at vkcodes.htm for codes. JoymappingEnabled=FALSE Left=37 up=38 Right=39 Down=40 Button1=17 Button2=18 Button3=32 Button4=53 Button5=54 Button6=49 Button7= Button8= Button9= Button10= Button11= Button12= [MOUSEMAPPING] # For registered users, the ability to control the mouse with a gamepad and/or directional keys. # For example for PC strategy games. # Apparantly this functionality is similar to the software Pinnacle profiler. Remember you can setup an emulator # as one PC game. Specify enabled, and mousespeed 0-20. 20 Being fastest. This setting overrides the directional # mapping for the above and buttons 1 and 2 Button 1/CTRL becomes left mouse. Button 2/ALT Right mouse MouseMappingEnabled=false MouseSpeed=0 [GAMEPADEXIT] #MAP Gamepad controls to exit and make controls exit process MapGamePadExit=TRUE #Flag the controls that exit a game by placing True next to each control. To not use the control as part of the combination use a 0 Left= Down= Right= Up= Button1=True Button2= Button3=True Button4= Button5=True Button6=True Button7= Button8= Button9= Button10= Button11= Button12= [BLOCKKEYS] # Use this section to disable and block key presses and mouse clicks. # To disable the mouse clicks use code 1 for left mouse button, # 2 for right button and 4 for middle button Enabled=false BlockKey_1=1 BlockKey_2=2 BlockKey_3=4 BlockKey_4= BlockKey_5= [KEYBOARDREMAP] # Remap Keys for the emulator. Specify from the from key, which is the key you wish to replace the to key # This should be good enough for real time gaming. Registered version feature. Look at VKCodes.htm for codes. Enabled=False Remap_1_From_VK= Remap_1_To_VK= Remap_2_From_VK= Remap_2_To_VK= Remap_3_From_VK= Remap_3_To_VK= Remap_4_From_VK= Remap_4_To_VK= Remap_5_From_VK= Remap_5_To_VK=

Hi, When i first started using GameEX i posted about getting a combo of buttons on my gamepad to exit an emulator. I eventually got this to work using the advanced config SNESV6.ini... So some time passed, HTPC got formatted and i never got my emulators setup again until the other night. When i got everything setup i tried to configure this again, i should mention that i'm using a wireless XBox360 controller. Go into the config and tell it to exit when i press A, Y, Left and right bumper (keys 1,3,5,6) But this doesn't work. I configured everything like i did before, and i know that it's using the config since i stopped the ESC key from exiting the EMU and THAT worked no problem. So maybe are my button numbers wrong or am missing something else?

I'm just wondering if there is a good way to figure out exactly what GameEx thinks button 1-10 are on my gamepad? as mentioned before i have (2) Logitech Dual action usb gamepads. The logitech app in control panel>Game controllers just illuminates the button that is being pressed and doesn't give a number. The buttons are numbered on the controller but do not corespond to what i would map in the .ini file. i.e gamepad button #4 = button #1 in the .ini file. Also if i'm using trial and error in an emu to figure out what button is what, is it going to matter what gamepad i use? EDIT: ok so i have my mappings figured out, just wondering if this combination of buttons has to be pressed in unison or if it can be sequential?

good call Thanks again!

Thanks! so is it possible to make a .ini for all other emus?

I'm just wondering if it is possible to configure GameEx to exit emulators when i press a certain sequence of buttons on my gamepad? My initial searches on the forums aren't returning any results, maybe i'm searching for the wrong thing. I have a logitech Dual Action USB gamepad that i'm using with my HTPC. Thanks