graf

OP PA . It worked .thanks mate

Cool. I will test it out tonight and let you know.

Sorry fat fingers. it is "FPLoader.exe"

I have the same issue. FDloader is both in the bam folder an also the future pinball folder. I can scroll through the tables and when I select a table the loading screen appear and then it goes back to the pinball pinball selection. I only use futurepinball. I have a 3 screen setup. The DMD is a usb monitor. Everything works find to load the games from Future Pinball itself. I have FDloader as Run as Admin always. My OS is windows 7. I am also running BAM. [FuturePinball] Enabled=True WorkingPath=C:\Games\Future Pinball\BAM TablePath=C:\Games\Future Pinball\Tables Executable=Future Pinball.exe Parameters=/STAYINRAM /open "[TABLEPATH]\[TABLEFILE]" /play /exit /arcaderender LaunchBeforeEnabled=True LaunchBeforeWorkingPath=C:\Games\Future Pinball LaunchBeforeExecutable=FutureDMD.exe LaunchBeforeHideWindow=False LaunchBeforeWaitForExit=False LaunchAfterEnabled=False LaunchAfterWorkingPath= LaunchAfterExecutable=notepad.exe LaunchAfterHideWindow=False LaunchAfterWaitForExit=True MouseClickFocus=True LaunchBeforeParameters=table="[TABLEFILE]" close=1 Here is the message from the log file locating device: FAIL () creating connection: FAIL () I have uploaded both the config file and the log file. PinballX.ini pinDMD_log.txt

ok it is the beta bam.dll that is causing the error. I went back to the old bam.dll and it worked

I updated my PinballX. When I start pinballX it is all ok. I am able to go through my tables (I only use FuturePinball tables and BAM). When I select a table and try to start it. I get the following Problem signature: Problem Event Name: APPCRASH Application Name: Future Pinball.exe Application Version: 1.9.2008.1225 Application Timestamp: 4d1d68d3 Fault Module Name: BAM.dll_unloaded Fault Module Version: 0.0.0.0 Fault Module Timestamp: 581baf5f Exception Code: c0000005 Exception Offset: 65bc1d32 OS Version: 6.1.7601.2.1.0.256.4 Locale ID: 3081 Additional Information 1: 0a9e Additional Information 2: 0a9e372d3b4ad19135b953a78882e789 Additional Information 3: 0a9e Additional Information 4: 0a9e372d3b4ad19135b953a78882e789 I have updated updated BAM to try and fix the issue. no good. I made sure that the futurepinball.exe and the BALL.dll are "unblock" and run as administrator. Also if I run BAM by itself it works fine. Any ideas >

Thanks Guys. it was a stupid mistake in the xml file. I should of looked at that first but it has been such a long time Thanks once again

Ok i think u guys r right. Cause when i built the new pc i used the original pinballx folder

Btw i have the following morherboard asus p8h61-mle/usb3. I did another test on the new Windows pc. Where i unplugged the usb x2 cables for the usb monitor. Then triee to start pinballx. But it crashed again. I even checked the windows event log but i cant see any errors. Is there another place where i can get more of a detail logs which can ooint me to why is it crashing. One other thing is the win10 is rhe july 2016 version . I am thinking of going to try another old iso for win8 . Its just strange that i can get future pinball running the tabels on the three monitor set up but pinballx dies. Also i just run future pinball tabels. I hope soneone can point me in the righr direction

Ok i found a spare hard disk and install win 10 on it. I get the same issue when i try to start pinballx. The system was working fine a cou0ke of weeks ago. Maybe i should go back to win 7 32bit or xp. Anybody else having the same issue???

i have reinstall futuredmd 1.8.1 and the same issue . PinballX crashes. i am going to try an d install .net framework 4.6

Hello, Dont know what is going on but when I start Pinballx it says "Welcome" then it crashes. i am running win 7 64bit. I have a NVIDIA GeForce GTX 560. I was running the latest nvidia drive for this but all of a sudden I was getting the following error " \??\C:\Users\XXX\AppData\LOcal\NVIDA\NvBackend\ApplicationOntology/NvOAWrapperCache.exe - cannot start due to incompatibility with 64-Bit versions of Windows.'" So I uninstalled and went to a earlier version and this fix that issue.gone. I run a 2nd monitor 21 inch via DVI . 3rd monitor USB running DisplayLink USB Graphics Software for Windows 8.0 M1. When I run future pinball (BAM) and FutureDMD it works the pinball games are running. But as soon as I try Pinballx. It crashes. I have reinstalled PinballX and the same issue occurs again. Here is the Log file 11:38:08.7 14/08/2016: PinballX - Version 2.22 11:38:08.8 14/08/2016: Windows 7 Enterprise Service Pack 1 64-bit (7.9GB) 11:38:08.8 14/08/2016: Loading Settings 11:38:08.8 14/08/2016: Initialize Component 11:38:08.8 14/08/2016: Initialize Display 11:38:10.0 14/08/2016: Loading PlugIns 11:38:10.0 14/08/2016: Loaded Plugin:"Speak Game Names" Version 1 By Tom Speirs 11:38:10.1 14/08/2016: PlugIn: "Speak Game Names" Initialized OK 11:38:10.1 14/08/2016: Using Plugin System Version: 1 11:38:10.2 14/08/2016: Created DirectX BackGlass Window 11:38:10.3 14/08/2016: Created DirectX DMD Window 11:38:10.3 14/08/2016: Hiding Cursor 11:38:10.3 14/08/2016: Hiding Taskbar 11:38:10.4 14/08/2016: CPU: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz 11:38:10.4 14/08/2016: GPU 1: NVIDIA GeForce GTX 560 11:38:10.4 14/08/2016: Displays: 3 11:38:10.4 14/08/2016: Load Game List 11:38:10.4 14/08/2016: Loading Database: Future Pinball 11:38:10.4 14/08/2016: Error. Exiting 11:38:10.4 14/08/2016: Argument 'Length' must be greater or equal to zero. 11:38:10.4 14/08/2016: at Microsoft.VisualBasic.Strings.Mid(String str, Int32 Start, Int32 Length) 11:38:10.4 14/08/2016: at PinballX.Main.a(String A_0, String A_1, String A_2, Boolean A_3, String A_4, String A_5) 11:38:10.4 14/08/2016: at PinballX.Main.b(String A_0, String A_1, String A_2) 11:38:10.4 14/08/2016: at PinballX.Main.b(Boolean A_0, Boolean A_1, Boolean A_2, Boolean A_3) 11:38:10.4 14/08/2016: at PinballX.Main..ctor() 11:38:10.4 14/08/2016: Disposing Plugins 11:38:10.4 14/08/2016: Showing Taskbar 11:38:10.4 14/08/2016: Unhiding Mouse Cursor 11:38:10.4 14/08/2016: Bye Any help please !!

Hi Guys, Just a quick question. I am staring up my Pinball x cabinet. I have the old version 1.75. Should and can I just install the new version on top. The only tables I use are future pinball tables/BAM and i am using 3 monitors (DMD is a USB monitor)

Hi tetrafred, I had this issue a long time ago and i posted it here about pinballx minimize after u quit a table. However I see something that might help Executable=FPLoader.exe rename FPLoader.exe to FuturePinball.exe.

Fix the issue I used the standard version of shark007 codec anf use the recommended settings. So far so good