Golden Tee 2005 Trackball With GameEx

[zx12rcarl]

hia all

anyone no if i can use a golden tee trackball with gameex and my ipac and a stand-jamma-cab

if so how do i go about doing this.

any help out there or tuts be brill

thanx.

[Jamie]

hia all

anyone no if i can use a golden tee trackball with gameex and my ipac and a stand-jamma-cab

if so how do i go about doing this.

any help out there or tuts be brill

thanx.

Hi, I did this m8,Just bought a Mini-Pac But with a TRACKBALL harness.Don't forget the harness mind,its a separate item.

[zx12rcarl]

thanx for the info jamie

so i need to go buy a mini-pac with a trackball harness.

brill will check out cost an so on

thanx m8

EDIT!!!!

wow forgot to say its a j-pac i have can i not use the j-pac to run the trackball ?

dont no till ya ask

[bkenobi]

You need to interface the trackball to the PC so that it turns into a standard mouse. There are many ways to do it, but the easiest way (arguably) is to use a MiniPac, opti-pac, or an opti-wiz. The minipac doesn't require any soldering although I think the others can be purchased so they don't either. If you are capable of using a soldering iron, I would consider using a mouse hack since it may be cheaper and quicker (although the opti-wiz is only $15 USD).

[zx12rcarl]

thanx for the info bkenobi

just order the Opti-Wizâ?¢ Trackball and Spinner Interface (OPTWIZ01) = $16.95 Connection Method "No-Solder" Version Default Port & Cable Type USB

so just have to hang on now till it gets to the uk and give it a try!

nice one ladz for the help

[Jamie]

thanx for the info bkenobi

just order the Opti-Wizâ?¢ Trackball and Spinner Interface (OPTWIZ01) = $16.95 Connection Method "No-Solder" Version Default Port & Cable Type USB

so just have to hang on now till it gets to the uk and give it a try!

nice one ladz for the help

If you got it from ultimarc,then it wont take long atall m8,There very quick for delivery.Good luck.

P.S. One problem i had was the up and down were the wrong way around.If this happens its the 2 outer wires on the Y axis cable you have to swap around.

[bkenobi]

Opti-Wiz is a product made by RandyT of GroovyGameGear.com. I've purchased from them a couple times and spoken to RandyT a number of times. He's got some great products and I will buy from him again come my next project!