PInballX playfield on secondary monitor ?

[leprinco]

Can pinballX main screen (playfield) runs on a secondary monitor in full screen mode ?

I setup my two monitors as standard (playfield then backglass top aligned), but put the backglass monitor as primary.
As the playfield is rotated, I setup backglass primary intentionally

playfield is /Display0 and backglass is /Display1

When I run pinballX in Full screen mode, despite monitor=0 in pinballX.ini, playfield goes on backglass monitor over backglass and dmd
When I run in windowed mode, I can move it on secondary monitor with windowx=-1920 but I cannot remove the title bar and the backglass + dmd are then no more correctmy displayed

I run on version 6.58 of pinballX

PinballX.iniFetching info...

[Tom Speirs]

it should do, but note the monitor layout does not always match windows.

Forget completely about windowed mode. it is purely for testing only.

[leprinco]

Thanks for the windowed mode, I forget it

Then I tested all monitor=[0, 5], no way to push on th eother screen

I also forgot to mention I have two GPUs 
00:15:18.62  29/01/2025:  GPU 1: Intel(R) HD Graphics 4600   => backglass
00:15:18.62  29/01/2025:  GPU 2: NVIDIA GeForce GT 1030     => playfield
00:15:18.62  29/01/2025:  Displays: 2

This may be the cause ? 

[Tom Speirs]

It might be. i have not tested using two gpu's since Windows 8.

[leprinco]

then would be awesome to support two GPUs as I have exhausted all possibilities and cannot manage to move the pinballX playfield on my rotated screen

Or have another way to reference monitor such as =0 (screen index) or @0 (pixel x coord) like in screenres.txt

Thanks a lot

Edited January 28 by leprinco

[Tom Speirs]

its more of a problem with newer windows iterations. Not much i can do easily. Two gpus for Pinball was definitely a thing but back in the windows 7 days.