[APPLICATION] chankast_launch v1.6

[Brian Hoffman]

That is what "J"??? Or the find t be J??? lol Indeed it is super frustrating

L'utilisation XPADDER de faire le joypad boutonner 1 émulent la pression "J" de clavier Configurez NullDC pour employer "J" pour le bouton 1 OUVREZ LE BLOC-NOTES et le vérifiez que Joypad 1 serre "J"

[Nologic]

Start nullDC then click "Options\Maple\Port A\Config keys for Player 1"

Now set these values to those supported by your keyboard

Start Xpadder and match the Gamepad buttons to those you set in the "nullDC Controller Key config"

Save the Xpadder profile, then click "OK" on "nullDC Controller Key config" and close nullDC.

[spoonch1]

L'utilisation XPADDER de faire le joypad boutonner 1 émulent la pression "J" de clavier Configurez NullDC pour employer "J" pour le bouton 1 OUVREZ LE BLOC-NOTES et le vérifiez que Joypad 1 serre "J"

lol, thou doing rather well in French... lol Otherwise what is the name of that block note???

PS: I thee promises that once this problème resolved I create a tuto on my forum has this subject

[Brian Hoffman]

lol, thou doing rather well in French... lol Otherwise what is the name of that block note???

PS: I thee promises that once this problème resolved I create a tuto on my forum has this subject

NOTEPAD.exe

Use this to be sure when you press button 1 on joypad it simulates the J keystroke

Employez ceci pour être sûr quand vous appuyez sur le bouton 1 sur le joypad qu'il simule la frappe de J

[Brian Hoffman]

Xpadder configure le joypad dans le clavier puis NullDC utilise le clavier

[spoonch1]

but I does not understand that must I note on the open file notes pad!! To me notes what it is necessary to mark please and or I must place this file????

Must I go to configure something on NullDC/maple/Port/config Keys to player 1???

[Brian Hoffman]

but I does not understand that must I note on the open file notes pad!! To me notes what it is necessary to mark please and or I must place this file????

Must I go to configure something on NullDC/maple/Port/config Keys to player 1???

Im making a video...

15 minutes will be ready

[spoonch1]

but I does not understand that must I note on the open file notes pad!! To me notes what it is necessary to mark please and or I must place this file????

Must I go to configure something on NullDC/maple/Port/config Keys to player 1???

OK I put J instead of 1 in â??Buffercountâ? of file CFG open under notspad.

BufferCount=J NullDC.cfg

[ndc_hookjoy]

PortA_CONT_C=66

PortA_CONT_B=98

PortA_CONT_A=97

PortA_CONT_START=74

PortA_CONT_DPAD_UP=38

PortA_CONT_DPAD_DOWN=40

PortA_CONT_DPAD_LEFT=37

PortA_CONT_DPAD_RIGHT=39

PortA_CONT_Z=77

PortA_CONT_Y=100

PortA_CONT_X=101

PortA_CONT_DPAD2_UP=0

PortA_CONT_DPAD2_DOWN=0

PortA_CONT_DPAD2_LEFT=0

PortA_CONT_DPAD2_RIGHT=0

PortA_CONT_ANALOG_UP=1

PortA_CONT_ANALOG_DOWN=40

PortA_CONT_ANALOG_LEFT=37

PortA_CONT_ANALOG_RIGHT=39

PortA_CONT_LSLIDER=65

PortA_CONT_RSLIDER=83

[Controllers] Fichier XEPADDER

Controller1Name=Logitech® Precision Gamepad

Controller1ID=4,109,194,26

Controller1File=C:\Documents and Settings\Sylvestre\Mes documents\PAD 1 logitech DC.xpaddercontroller

Controller1Recent1=

Controller1Recent2=

Controller1Recent3=

Controller1Recent4=

Or should I reférencer the button 1 in J on XPADDER or on nullDC???

[Brian Hoffman]

La vidéo est 3 parts. 1. Les expositions configurent le joypad aux keypress. 2. Le bouton de joypad d'essai enfoncent notepad.exe 3. configurent NullDc pour travailler avec les boutons assignés.

http://www.megaupload.com/?d=AD560ROK

[spoonch1]

La vidéo est 3 parts. 1. Les expositions configurent le joypad aux keypress. 2. Le bouton de joypad d'essai enfoncent notepad.exe 3. configurent NullDc pour travailler avec les boutons assignés.

http://www.megaupload.com/?d=AD560ROK

Very Good!!! My PAD and almost loan, rest to success has to blow up the character. When I support on my top perso not jumping!!! I have no PAd analog

PS: T too strong Brian mercy beacoups.

[Brian Hoffman]

Very Good!!! My PAD and almost loan, rest to success has to blow up the character. When I support on my top perso not jumping!!! I have no PAd analog

PS: T too strong Brian mercy beacoups.

Fonctionne-t-cela maintenant ? Si aucun essayez alors remap jusqu'à la clef diffrent.

[spoonch1]

Fonctionne-t-cela maintenant ? Si aucun essayez alors remap jusqu'à la clef diffrent.

Hello brian, made in the game on which I cannot jump that is soul calibur who plays with the analog, for what is of capcom vs snk 2 no problème. otherwise lorsqque I launches nulldc since gameex0 Gameex be person and my office is displayed to launch nulldc????

[Brian Hoffman]

Hello brian, made in the game on which I cannot jump that is soul calibur who plays with the analog, for what is of capcom vs snk 2 no problème. otherwise lorsqque I launches nulldc since gameex0 Gameex be person and my office is displayed to launch nulldc????

Je ne suis pas sûr au sujet du jeu (soul caliber)... Je crois que un bouton est assigné au saut. Pas le DPAD VERS LE HAUT. Ses bruits comme vous comprennent l'installation correctement.

Good job!

[spoonch1]

otherwise lorsqque I launches nulldc since gameex0 Gameex be person and my office is displayed to launch nulldc????

[Brian Hoffman]

otherwise lorsqque I launches nulldc since gameex0 Gameex be person and my office is displayed to launch nulldc????

I do not understand... Lorsqque, Gameex0,Office is displayed to launch nulldc.

This is how it looks if I say this to you.

autrement le lorsqque I lance le nulldc puisque gameex0 Gameex soit personne et mon bureau est montré pour lancer le nulldc ? ? ? ?

[Brian Hoffman]

Dites-vous que gameex/nulldc fonctionne à la maison mais pas au travail ?

[spoonch1]

When I launch plays cd. since Gameex, Gameex me reference puts appart (office) and the play this lance on nullDC as if I had launched it since the emulator and not Gameex!!!

[Brian Hoffman]

When I launch plays cd. since Gameex, Gameex me reference puts appart (office) and the play this lance on nullDC as if I had launched it since the emulator and not Gameex!!!

I dont have a fucking clue...

Je ne comprends toujours pas.

[Brian Hoffman]

I dont have a fucking clue...

Je ne comprends toujours pas.

Wait

Si le NullDc joue seulement le CD le BIOS pourrait être corrompu. Employez l'autre BIOS.

I have seen this in chankast... If the Bios gets corrupt it will only play cd or not go past menu etc or keep asking for date and time etc... Try using a new bios.

[spoonch1]

I excute the game dreamcast on gameex, and gameex this firm to launch the emulator with the game

[spoonch1]

It is not a game but a Rom (cdi)

[Brian Hoffman]

I excute the game dreamcast on gameex, and gameex this firm to launch the emulator with the game

Are you using NULLDC Loader?

Nulldc_loader.exe "[rompath]/[romfile]"

Please export and post your nulldc config.

-----

Employez-vous le chargeur de NULLDC ? Nulldc_loader.exe "[ rompath]/[romfile ]" Exportez et veuillez signalez vos config de nulldc.

[spoonch1]

I have many entry: Nulldc_loader. exe "[rompath]/[romfile] «. has now when I throw my rom on gameex, a window of error named" nullDC 1.0.0b1 "if' opens and on what is written" «/EEâ « falaid à load "

[Brian Hoffman]

I have many entry: Nulldc_loader. exe "[rompath]/[romfile] «. has now when I throw my rom on gameex, a window of error named" nullDC 1.0.0b1 "if' opens and on what is written" «/EEâ « falaid à load "

Please export your config. Post the contents.

Veuillez exporter vos config. Signalez le contenu.

Also post your RUNLASTGAME.bat

Signalez en outre votre RUNLASTGAME.bat

Right click and edit it.

[spoonch1]

I give you the file .ini nullDc like you asked it to me but also an image of my file and the error of which I spoke to you who souvre also when I launch runlastgameâ?¦

[Emulator_1]

Enabled=True

STARTPAGENAME=Sega Dreamcast

TITLETEXT=Dreamcast

StartPageLogo=

ROMFilter=*cdi

RomPath=C:\Program Files\eChanblard\Incoming

SnapPath=

TitlePath=

BoxPath=

CartPath=

ManualPath=

WorkingPath=D:\Arcade\NullDC

MapKeys=True

WaitBeforeKeys=

SendKeys=

ReplaceDash=True

ReplaceUnder=True

Capitals=True

RemoveBrackets=True

ShowDesktop=True

Debug=False

MAPFile=

AlsoLaunch=

Command=nullDC_Loader.exe "[ rompath]/[romfile ]"

OLDatZip=

LaunchBefore=

LaunchAfter=

configFile=

ExcludedFiles=

CustomBackground=

PlayMusic=

DontShowInfo=

PlaySelectionMusic=

SelectionMusicFolder=

PCGame=

DATABASE=

GamesIn7Zips=

PlayInScreenSaver=

ShowMostPlayed=

RandomMostPlayed=

CDCheck=

CDCheckFile=

[GENERAL]

DumbyValue=