Tom Speirs Posted April 17, 2017 Share Posted April 17, 2017 You know it would help me quite a bit if you guys posted your logs and configuration files. As for the op perhaps try saying sorry if you find yourself in the situation much with English speakers who think your being an asshole? That's pretty universal and goes a long way in my experience. Link to comment Share on other sites More sharing options...
kds70 Posted April 17, 2017 Share Posted April 17, 2017 Hi Tom, which logs do you need ? only the pinballx/log/log.txt after failing to start a table with it´s backglass and the pinballx configuration or something special else ? Have a good night, greedings Link to comment Share on other sites More sharing options...
Tom Speirs Posted April 17, 2017 Share Posted April 17, 2017 I am really looking for specs of system including storage. It seems this is a timing issue perhaps more adverse on lower end systems. Link to comment Share on other sites More sharing options...
rablack97 Posted April 18, 2017 Share Posted April 18, 2017 I'm running an i5, gtx 960 video card, 16 gb of ram definately not low end 250gb ssd drive. I agree this one will be hard to pinpoint as it could be file based, i've used one version of a backglass and nothing, then use a different download and then it works. On demolition man, had to uncheck hide backglass in the game manager before it appeared. I'm willing to test and help you solve this Tom, let us know what you need as this one part adds hours to configuration of one table when it should take about 15- 20 mins total to get a table going. Link to comment Share on other sites More sharing options...
Tom Speirs Posted April 18, 2017 Share Posted April 18, 2017 I really don't know but the full screen exclusive option in VPX states clearly itself B2S is not supported when used. Just have to put this on the backburner. Link to comment Share on other sites More sharing options...
Tom Speirs Posted April 18, 2017 Share Posted April 18, 2017 Again, its really helpful to have the log and ini. I need to know if you have the Full Screen Exclusive hack enable or not. Link to comment Share on other sites More sharing options...
rablack97 Posted April 18, 2017 Share Posted April 18, 2017 i do have exclusive full screen enabled, had been working with about 85%-90% b2s backglasses. log.txt PinballX.ini Link to comment Share on other sites More sharing options...
Tom Speirs Posted April 18, 2017 Share Posted April 18, 2017 I am talking about the setting in PinballX for the hack. Its not set in your ini so it is definitely on. Try turning it off please. Link to comment Share on other sites More sharing options...
rablack97 Posted April 18, 2017 Share Posted April 18, 2017 nope, disabled the hack, put type back to VP, problem tables not showing backglass. Not sure if it matters, but my vpx tables are under other system which does not have that hack option. Link to comment Share on other sites More sharing options...
Tom Speirs Posted April 18, 2017 Share Posted April 18, 2017 Here is another one. Please try and post the log. Thanks. Tom. PinballX.zip 1 Link to comment Share on other sites More sharing options...
kds70 Posted April 18, 2017 Share Posted April 18, 2017 Hi Tom. It seems you did it with the last patch. Taxi, Nascar and all of my other tables are starting now with D2BS Backglas (excl. fullscreen modus of VPX). Fullscreen Hack is enabled and my VPX / PBX is installed on a HDD. A SSD ist planned for the future. Here is the log / ini after starting PBX with your patch and successfully loading taxi / nascar with backglas. Thank you for your support. log.txt PinballX.ini Link to comment Share on other sites More sharing options...
Tom Speirs Posted April 18, 2017 Share Posted April 18, 2017 Please try attached: PinballX.zip Link to comment Share on other sites More sharing options...
vogliadicane Posted April 18, 2017 Author Share Posted April 18, 2017 14 hours ago, Tom Speirs said: As for the op perhaps try saying sorry if you find yourself in the situation much with English speakers who think your being an asshole? That's pretty universal and goes a long way in my experience. Huh? I thought it was clear now, that it was a misunderstanding (s. my post below) and I had already apologized. And now I should still find myself in a situation others think I'm an asshole? An asshole? Vielleicht solltest Du Deine Einstellung gegenüber Nicht-Muttersprachlern mal ein bisschen korrigieren. On 16.4.2017 at 1:49 PM, vogliadicane said: ....which was obviously not true. That's probably where the confusion started, so apologies. On 15.4.2017 at 5:24 PM, vogliadicane said: @Tom ...So, no bad feelings anymore, ok? 22 hours ago, vogliadicane said: @Draco: completely misunderstod te "beef" part (not a native speaker) Link to comment Share on other sites More sharing options...
rablack97 Posted April 18, 2017 Share Posted April 18, 2017 With or without the hack enabled. Link to comment Share on other sites More sharing options...
Tom Speirs Posted April 18, 2017 Share Posted April 18, 2017 Well if you could test both that would be great. thanks. Link to comment Share on other sites More sharing options...
rablack97 Posted April 18, 2017 Share Posted April 18, 2017 new exe hack enabled No good backglasses not showing up testing without hack now log.txt Link to comment Share on other sites More sharing options...
rablack97 Posted April 18, 2017 Share Posted April 18, 2017 hack disabled no backglasses testing hack enabled , with new exe , system type Custom now log.txt Link to comment Share on other sites More sharing options...
rablack97 Posted April 18, 2017 Share Posted April 18, 2017 new exe hack enabled, custom system type every last table i tried worked, not sure what that type does but it fixes the problem. log.txt Link to comment Share on other sites More sharing options...
Tom Speirs Posted April 18, 2017 Share Posted April 18, 2017 Hey, I don't think you are running the correct exe or I screwed up. You are using Fullscreen exclusive mode in VPX? Please double check with the attached. EXE should be dated around 3:30PM Thanks. Tom. PinballX.zip Link to comment Share on other sites More sharing options...
rablack97 Posted April 18, 2017 Share Posted April 18, 2017 sure thing Tom will check this w/i the hour and provide feedback. Link to comment Share on other sites More sharing options...
Tom Speirs Posted April 18, 2017 Share Posted April 18, 2017 1 minute ago, rablack97 said: sure thing Tom will check this w/i the hour and provide feedback. Thanks, just to be clear you are using fullscreen exclusive mode in VPX? Link to comment Share on other sites More sharing options...
rablack97 Posted April 18, 2017 Share Posted April 18, 2017 yes that is enabled in VPX. I am disabling and enabling the hack in PBX only. Link to comment Share on other sites More sharing options...
Tom Speirs Posted April 18, 2017 Share Posted April 18, 2017 Also check this registry key: HKEY_CURRENT_USER, "Software\Visual Pinball\VP10\Player", "FsWaitTime", It should be 0 or not exist. Link to comment Share on other sites More sharing options...
rablack97 Posted April 18, 2017 Share Posted April 18, 2017 OK Tom, That did it.... New exe, other system type set to visual pinball, hack is on. That Registry key was set to 1388, changed to zero. log.txt Link to comment Share on other sites More sharing options...
rablack97 Posted April 18, 2017 Share Posted April 18, 2017 Works great with Hack off as well. log.txt Link to comment Share on other sites More sharing options...
Recommended Posts