BG jumps to DMD screen with 15" vga monitor...

[Onevox]

Geforce 1060, 39" 4K seiki PF screen via HDMI, 28" element for BG via DVI, 15" Samsung (displayport to vga cable)

I suspect this is an nvidia issue: When I exit a table in PinballX, the BG image jumps to the DMD screen and the BG screen goes black. 

I hooked up a 17" dell via DVI and problem went away. 

I really need a 15" to fit my backbox. Any one report anything like this before? Solution? (besides finding a 15" with dvi or displayport)

 

thanks. pete

[RustyCardores]

If you are using a different port off the GPU, then you may need to change the screen number in your PBX settings.  The order that nvidia activates the display outputs effect screen ordering.  Eg: my backglass screen is #2 in Windows, but I have to set it as #3 in PBX & VPX 

[BamBam963]

  On 3/21/2017 at 11:49 PM, Onevox said:

Geforce 1060, 39" 4K seiki PF screen via HDMI, 28" element for BG via DVI, 15" Samsung (displayport to vga cable)

I suspect this is an nvidia issue: When I exit a table in PinballX, the BG image jumps to the DMD screen and the BG screen goes black. 

I hooked up a 17" dell via DVI and problem went away. 

I really need a 15" to fit my backbox. Any one report anything like this before? Solution? (besides finding a 15" with dvi or displayport)

 

thanks. pete

Expand  

Same thing happens to me and I am about to lose my mind.  I have a three screen cabinet and everything runs great in VPX.  I fire up PBX once and it works great.  I exit PBX and go back in and my backglass is on my DMD screen. Frustrating as hell. I am running two AMD cards. R9 2GB card for the playfield and an R7 for the backglass.  Playfield is on screen 1, backglass is on 2 and DMD is on 3.  It never works conisitently.