Capture Videos to PinballX Media - Table, Backglass, and DMD

[Carny_Priest]

The capture script does work with ffmpeg daily static build from November 1.

FP playfield capture works with the current stable build of Open Broadcaster Software (0.656).

[Rhyno77]

Hey Gtxjoe, first off, I wanted to say thanks for packaging

Carny_priest's utility into a nice little gui option. It works pretty well for me, but I have a few issues that I was wondering if you'd seen in your usage.

Despite checking the option to only capture tables that need media, it goes through all of them. I let it run through completely for a few hours, then tried it again and it captured them all a second time.

For some reason it's not capturing my dmd on monitor 2 of 3, only the backglass and playfield.

Thanks again to both of you!

[allknowing2012]

Yes thanks for taking this to the next level! Now we have somewhere to point people to who are missing their background vids and screenshots.

I ran into issues with those dreaded old b2s.exe backglasses, but with the "only do missing stuff" option, its only a pain the first time thru. The program is redoing many of my vids since the naming didn't match the description. Thanks okay .. again, one time thru pain and suffering.

I have a few vids that come back corrupt from the ffmpeg issues - I havent tracked that down - if its perhaps related to the non "even" x/y resolution settings or what. In any case its pretty simple to see those bad files in file explorerer, delete them and re-run the script again. It usually gets the second time thru.

[Carny_Priest]

Just curious, what issues are you having with B2S?

I haven't had any issues with corrupt output, but my resolutions are fairly standard. Also, the output uses a full color palette. Works perfectly well with LAV filters but may pose issues with other codecs. This can be fixed to output a color palette that will work with anything.

[gtxjoe]

Thanks for trying this out. I need people to try this to work out the bugs

I did have an issue with not recording my DMD when the dmd height defined screenres.txt was an odd value, not an even value. I had dmd height of 305, when I changed it to 300, it worked fine. I can investigate further and maybe have the script subtract 1 pixel from odd values.

@Rhyno, send or post your screenres.txt and pbxrecorder.ini file so we can try to check out the DMD recording on our machines. Try setting the DMD width and height to some even numbers as a test.

If the DMD video is not getting recorded, then every time you run the script, the script will see that the DMD video is missing and re-record all videos for the table (table/backglass/dmd), so the videos are all synchronized. That would explain why it re-records every table everytime, so lets figure out why the DMD is not being recorded. I assume you never saw the pop-up saying skipping table recording...

@allknowing2012 - How were you naming your videos before this? The reasons for the re-recording of videos, could be that the script found media missing for a table. If 1 video or even 1 image, if you enabled that, is missing, it will re-record all media for that table. Next time, it will be skipped. Let me know if table skipping is working for you on subsequent runs.

As for ffmpeg issues, send or post your screenres.txt and pbxrecorder.ini for us to try out.

Also, I am not sure what you mean about B2S.exe issue. Can you explain a little more

[Rhyno77]

You're right about my DMD height; it's set to 315. I'm setting to 310 and we'll see how it runs through the night.

Thanks!

ScreenRes.txt

PBXrecorder.ini

[Jodannar]

Ive just run this across my cab for the first 10-15 tables. VP wasnt being closed between table loads. Subsequently older/previous tables were being recorded as the focus wasnt shifting to the new table. I now have recordings of the same table for multiple tables as the focus was not set to the proper table/old table closed before new opened.

I also have scrambled video for 90% of the recordings. Definately something wrong in my setup.

[gtxjoe]

What table did it stop working with? For me acdc crashes randomly a lot and that caused problems for tables after it. I had to remove that table from my xml. I added it back later and once I got a successful recording. It skips that problematic table

Was the stuck table running correctly or was it stuck on a crash screen or error or maybe the VP editor screen. I can try to add a few kill app commands in between tables so at least subsequent tables record properly

Maybe upload one of the smaller scrambled vids for us to check out to investigate

[allknowing2012]

b2s.exe issue .. those backglasses (ie before directb2s came out) dont stop when you kill vp.exe. I have to use a kill.bat script in pinballx to handle them. Assuming everyone has that issue ???

Any of them .. acdc/rush/abracadabra/surfer/sure shot.

[allknowing2012]

I too have hit or miss on vids .. they dont render. I re-run a number of times to eventually get it .. but havent been able to get thru all of them yet.

"@allknowing2012 - How were you naming your videos before this? The reasons for the re-recording of videos, could be that the script found media missing for a table. If 1 video or even 1 image, if you enabled that, is missing, it will re-record all media for that table. Next time, it will be skipped. Let me know if table skipping is working for you on subsequent runs. "

Skipping does work .. my vids are named (game).avi whereas you are checking for (description).avi

[Rhyno77]

Ive just run this across my cab for the first 10-15 tables. VP wasnt being closed between table loads. Subsequently older/previous tables were being recorded as the focus wasnt shifting to the new table. I now have recordings of the same table for multiple tables as the focus was not set to the proper table/old table closed before new opened.

I also have scrambled video for 90% of the recordings. Definately something wrong in my setup.

You might want to check your vpinball.exe's for "run as administrator". I unchecked the run as admin boxes and now the capture.exe has high enough permissions to kill the vpinball task.

[Rhyno77]

Btw, GTXJoe, I re-ran the exe last night with my screenres dmd values changed to even numbers, but unfortunately it didn't seem to make a difference. All tables were captured again, without dmd.

1920

1080

1366

768

2

0

0

1366

310

1370

240

0

[zanehed]

Hi guys, loving the progress on this, no DMD video for me either. Playfield and backglass are perfect.

GTX660

1920

1080

1680

1050

2

0

0

1280

370

1680

0

0

[Carny_Priest]

b2s.exe issue .. those backglasses (ie before directb2s came out) dont stop when you kill vp.exe. I have to use a kill.bat script in pinballx to handle them. Assuming everyone has that issue ???

Any of them .. acdc/rush/abracadabra/surfer/sure shot.

It would be easy enough to incorporate the rosveClose subroutine from fplaunch when killing the VP process in the script.

[gtxjoe]

Here is a link to

1) PBXrecorder_Beta02: which is for 2 or 3 monitor setup - just has minor fixes, including a bugfix for 2 monitor setup.

2) PBXrecorder_NODMD_Beta02: This is a temporary release- DMD recording is disabled and skipped on 3 monitor setups for those have DMD recording issues. It will let you capture at least the playfield and backglass as intended

About B2S.exe, Yes, Send me the close backglass.exe routine used and I can add it to the script. I dont have any tables using B2S.exe..

Now for DMD troubleshooting:

Download the dmdtest.zip and unzip in the folder with the PBX recording script. Run it and it will create a file called "PBXrecorderDMD.cmd" Double click on that new file and it will try to record a 2 second video of the dmd monitor (VP will not be started). Scroll up and look for errors in the window. and you can see if a dmd.mkv file was created in the same folder, it should be a 2 second video

PBXrecorder_Beta02.zip

PBXrecorder_NODMD_Beta02.zip

dmdtest.zip

[Carny_Priest]

About B2S.exe, Yes, Send me the close backglass.exe routine used and I can add it to the script. I dont have any tables using B2S.exe..

This is taken from my miniDMD script which is my VP Launcher. Instead of killing the VP process you would run the subroutines

; ***********************************************

; CloseVP from FPLaunch

CloseVP:

;toLog("CloseVP Called")

;Hotkey, %exitScriptKey%, Off

GoSub rosveClose

;GoSub bigbossClose ; change loops completely, put all data in xml !!! too slow

;Visual Pinball must be closed this way instead of killing process

;or it wil not save your last game information.i.e score/credtis

;DetectHiddenWindows on ;Or next line will not work

;Loop, 4

;Gui, %A_Index%: Destroy

;This line fixes where the VP Window flashes real quick

;when closing the window for a cleaner exit

; win hide removed cause vp should be minimized, not hidden

;WinHide, ahk_class VPinball

;WinShow, ahk_class VPinball

WinMinimize, ahk_class VPinball

WinClose, ahk_class VPinball

WinWaitClose ahk_class VPinball

; bigbossclose won't get executed cause main thread will exit

;GoSub bigbossClose

; there's no need for exitscript cause main thread will do it

;Goto ExitScript

return

rosveClose:

;toLog("rosveClose Called")

; rosve

; --------------------------------------------------------------

; --- Close the animated backglass -----------------------

; --------------------------------------------------------------

; b2s close bug fix

StringRight, ending, XTable, 3

if (ending = "B2S")

{

WinKill, Form1

}

return

; ***********************************************

#IfWinActive ahk_class VPPlayer

; Interlock Switch

i::

Send {End}

SetTimer, WaitForJoy7, 10

Return

WaitForJoy7:

if GetKeyState("Joy7")

return

Send {End}

SetTimer, WaitForJoy7, off

Return

; Exit Table

e::

Gosub CloseVP

Return

#IfWinActive

[Rhyno77]

Hey Gtxjoe, I don't have too much time tonight, so I'll try some things tomorrow to hopefully resolve.

Here's the output of mine - It runs for just a blip then exits out with the error below:

C:\WINDOWS\system32>"C:\ffmpeg32\bin\ffmpeg" -y -t 2 -rtbufsize 1500M -f gdigrab -framerate 30 -offset_x 3290 -offset_y 240 -video_size 1366x310 -i desktop -vcodec libx264 -preset ultrafast -qp 0 -threads 8 "C:\ffmpeg32\dmd.mkv"

ffmpeg version N-76347-gdd36749 Copyright © 2000-2015 the FFmpeg developers

built with gcc 5.2.0 (GCC)

configuration: --enable-gpl --enable-version3 --disable-w32threads --enable-avisynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libdcadec --enable-libfreetype --enable-libgme --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --enable-librtmp --enable-libschroedinger --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvo-aacenc --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs --enable-libxvid --enable-lzma --enable-decklink --enable-zlib

libavutil 55. 5.100 / 55. 5.100

libavcodec 57. 12.100 / 57. 12.100

libavformat 57. 11.100 / 57. 11.100

libavdevice 57. 0.100 / 57. 0.100

libavfilter 6. 14.101 / 6. 14.101

libswscale 4. 0.100 / 4. 0.100

libswresample 2. 0.100 / 2. 0.100

libpostproc 54. 0.100 / 54. 0.100

[gdigrab @ 04ee36a0] Capture area (3290,240),(4656,550) extends outside window area (0,0),(4646,1080)desktop: Input/output error

C:\WINDOWS\system32>Pause

Press any key to continue . . .

[Rhyno77]

Ok, I couldn't let this sit til tomorrow -

I changed the following:

From:

"C:\ffmpeg32\bin\ffmpeg" -y -t 2 -rtbufsize 1500M -f gdigrab -framerate 30 -offset_x 3290 -offset_y 204 -video_size 1366x310 -i desktop -vcodec

libx264 -preset ultrafast -qp 0 -threads 8 "C:\ffmpeg32\dmd.mkv"

To:

"C:\ffmpeg32\bin\ffmpeg" -y -t 2 -rtbufsize 1500M -f gdigrab -framerate 30 -offset_x 3290 -offset_y 205 -video_size 1356x310 -i desktop -vcodec

libx264 -preset ultrafast -qp 0 -threads 8 "C:\ffmpeg32\dmd.mkv"

Knocking down the output size by 10 pixels has fixed it. Not exactly sure why, since the DMD monitor itself is 1360 wide, and that's the number I'm using in b2s and Pinballfx2. I suspect that my problem lies with my monitors being differently positioned than most (1=pf, 2=dmd, 3=bg ), but i'm not sure.

Thanks for the support GTXJOE!

[Carny_Priest]

The error in the log - the numbers following window area are the X and Y coordinates of your entire desktop with (0,0) the very upper left corner (usually your playfield). And (4646, 1080) means the width of the entire desktop is 4646 px and the height is 1080 px.

Then the capture area defined by the capture instruction starts at position 3290 px and extends out to 4656 px. 4656 > 4646. Ffmpeg does not like it if it is told to capture an area not contained by the desktop, and it will crash.

If the DMD width is really 1360 then you can hard code the instruction to use 1360, and it should run.

Sent from my iPad using Tapatalk

[gtxjoe]

Yep that is it. It looks like you have playfield resolution of 1920x1080, backglass resolution of 1366x768 and then a dmd resolution of 1360x768

1920+1366+1360 = 4646 pixels wide max

If that is true, you should change your screenres.txt to align with your monitor resolutions better. The changes below reduces the width by 10 pixels and it should work now

1920

1080

1366

768

2

0

0

1366--->1360

310

1370--->1366

240

0

If you don't like how that changes your B2S DMD window when playing tables, then do what Carny said and hard code these values in the PBXvideorecorder ahk, so look for this line

DMD_X:=PF_width+XDMD_X ;Reference to Top Left of Playfield screen

and above it add these 2 lines:

DMD_width = 1360

XDMD_X = 1366

[Jodannar]

A flag to only record the back-glass, dmd or play field would be useful if possible. I use the directb2s directly in my front end along with pinmame for the majority of tables.

Also a way to paramater-ise the duration of the recording to a user selection. Personally 15 seconds of attract loop is plenty per table

[Carny_Priest]

Well, that is the deal with the script that I use personally for capturing. I wound up using a custom xml with an added B2S tag so that I could control whether or not I would record the DMD area depending on the table.

Of course, that means I can't use Game Manager. And that may be a dealbreaker for many users. It was OK for me. I'm used to putting together my own media packs and editing the xml by hand in Notepad.

I always record all three screens. These are captured simultaneously, and I like that as a result the video are synced together in PBX attract/preview mode. Best example of the effect would be Mystery Castle. That's why I don't use PBX built-in VPM or dB2S support. But it's cool if you do; it does save disk space for more tables.

[allknowing2012]

Turns out the issue for me was the taskkill lines after the capture

Run, taskkill /IM ffmpeg.exe /F,,UseErrorLevel

It was a bit too eager and it was killing the ffmpeg before it could complete the capture file cleanly. I simply commented them out and it had no problem doing the remaining tables.

The program closes itself under normal circumstances anyways.

Another option might be to increase the sleep, 5000 to say sleep, 10000.

I also added a Beep at the end of each table capture so I can hear it working away :-)

soundbeep, 1000, 700

[gtxjoe]

Glad you got it figured out. I will look at rosve's script for kill the B2S.exe. How do you do it on your setup?

Just above that is a 75 second wait. I guess on my new fast computer is is fine, but yes I should double it or even triple it. It really only intended to kill it if something goes wrong

Process, WaitClose, ffmpeg.exe, 75

To do and possible enhancements:

- Increase ffmpeg waitclose to 2x or 3x record times

- Kill backglass.exe

- Ability to specify which of the 6 possible medias to record: pf video, bg video, dmd video, pf image, bg image, dmd image

- Detect if DMD recording window exceeds windows virtual desktop width

- Drag and drop support of tables

- Maybe allow naming to Table name instead of Description name

[Carny_Priest]

This is my personal capture script. This uses a custom xml, mostly to support my miniDMD project which is a VP launcher, but it may be possible to use a standard xml. If tag 'rom' is populated, the script will pull the correct capture dimensions from the VPM registry. Tag 'exe' stores the correct executable. This would be 'alternateexe' in a standard xml. The new one is the tag 'B2S'. If True, the script will pull the correct capture dimensions from screenres.txt. There are some extras here: custom hard codes for certain roms where I am intentionally overscanning. If I pulled the values from the registry, ffmpeg will crash because the capture area is beyond the defined area of the desktop. I also have a section for AMH, where if the table is selected then the capture parameters are pulled from the UltraDMD key in the registry. I don't have the B2S kill script in here but you would replace line 256 with something involving those rosveClose/CloseVP subroutines from FPLaunch. They have been used for years in HyperPin. They are tried and true; works every time for me in my VPLauncher.

#NoEnv

#SingleInstance force

#WinActivateForce

;http://www.gameex.info/forums/topic/14632-multiple-exe-for-vp/#entry137471 - Thanks horseyhorsey

#Include, %A_ScriptDir%\xpath.ahk

SetTitleMatchMode, 2

DetectHiddenWindows, On

; User inputs

PinballX_Path=c:\PinballX

FFMPEG_Path=c:\ffmpeg\bin

OBS_Path=d:\Eric\VP\OBS_0_656b\64bit

Audio_Device="Stereo Mix (Realtek High Defini"

;Audio_Device=""What U Hear" (Creative SB Audi"

Table=%1% ;Table filename

SplitPath, Table,,, ext, XTable

If ext=fpt

system=FuturePinball

Else system=VisualPinball

; Read PinballX config for paths

If system=VisualPinball

Name=Visual Pinball

Else If system=FuturePinball

Name=Future Pinball

IniRead, WorkingPath, %PinballX_Path%\Config\PinballX.ini, %system%, WorkingPath

IniRead, TablePath, %PinballX_Path%\Config\PinballX.ini, %system%, TablePath

; Read description tag from xml - Thanks horseyhorsey - http://www.gameex.info/forums/topic/14632-multiple-exe-for-vp/#entry129111

databaseFile=%PinballX_Path%\Databases\%Name%\%Name%.xml

xpath_load(dbXML, databaseFile ) ; need to read the existing xml otherwise xpath deletes all existing nodes

description:=XPath(dbXML, "/menu/game[@name= . XTable . ]/description/text()")

exe:= XPath(dbXML, "/menu/game[@name= . XTable . ]/exe/text()")

rom:= XPath(dbXML, "/menu/game[@name= . XTable . ]/rom/text()")

B2S:= XPath(dbXML, "/menu/game[@name= . XTable . ]/B2S/text()")

StringReplace, description, description,,,`,,

StringGetPos, pos, description,\

If ErrorLevel=1

StringGetPos, pos, description,/

If ErrorLevel=1

StringGetPos, pos, description,:

If ErrorLevel=1

StringGetPos, pos, description,*

If ErrorLevel=1

StringGetPos, pos, description,?

If ErrorLevel=1

StringGetPos, pos, description,"

If ErrorLevel=1

StringGetPos, pos, description,>

If ErrorLevel=1

StringGetPos, pos, description,|

If ErrorLevel=0

description=%XTable%

If ext=fpt

{

IniRead, exe, %PinballX_Path%\Config\PinballX.ini, %system%, Executable

RegRead, PF_width, HKCU, Software\Future Pinball\GamePlayer, Width

RegRead, PF_height, HKCU, Software\Future Pinball\GamePlayer, Height

RegRead, BG_width, HKCU, Software\Future Pinball\GamePlayer, SecondMonitorWidth

RegRead, BG_height, HKCU, Software\Future Pinball\GamePlayer, SecondMonitorHeight

IniRead, DMD_width, %WorkingPath%\FutureDMD.ini, default, SizeW

IniRead, DMD_height, %WorkingPath%\FutureDMD.ini, default, SizeH

IniRead, DMD_X, %WorkingPath%\FutureDMD.ini, default, PosX

IniRead, DMD_Y, %WorkingPath%\FutureDMD.ini, default, PosY

IniWrite, %PF_width%, %OBS_Path%\profiles\FuturePinball.ini, Video, BaseWidth

IniWrite, %PF_height%, %OBS_Path%\profiles\FuturePinball.ini, Video, BaseHeight

IniWrite, %A_ScriptDir%\playfield.mp4, %OBS_Path%\profiles\FuturePinball.ini, Publish, SavePath

IniWrite, %A_ScriptDir%\Replay-$T.flv, %OBS_Path%\profiles\FuturePinball.ini, Publish, ReplayBufferSavePath

FileRead, Text, %OBS_Path%\sceneCollection\FuturePinball.xconfig ; Read file and return as var Text

IfNotInString, Text, %PF_width%

IfNotInString, Text, %PF_height%

{

IfInString, Text, 1280

IfInString, Text, 1024

{

StringReplace, Text, Text, 1280, %PF_width%, All

StringReplace, Text, Text, 1024, %PF_height%, All

FileDelete, %OBS_Path%\sceneCollection\FuturePinball.xconfig

FileAppend, %Text%, %OBS_Path%\sceneCollection\FuturePinball.xconfig

init=1

}

If init !=1

{

MsgBox Warning playfield width/height do not match FuturePinball.xconfig

ExitApp

}

}

}

Else

{

StringReplace, WorkingPath, TablePath, \Tables

FileReadLine, PF_width, %TablePath%\ScreenRes.txt, 1

FileReadLine, PF_height, %TablePath%\ScreenRes.txt, 2

FileReadLine, BG_width, %TablePath%\ScreenRes.txt, 3

FileReadLine, BG_height, %TablePath%\ScreenRes.txt, 4

RegRead, XDMD_width, HKCU, Software\Freeware\Visual PinMame\%rom%, dmd_width

RegRead, XDMD_height, HKCU, Software\Freeware\Visual PinMame\%rom%, dmd_height

RegRead, DMD_X, HKCU, Software\Freeware\Visual PinMame\%rom%, dmd_pos_x

RegRead, DMD_Y, HKCU, Software\Freeware\Visual PinMame\%rom%, dmd_pos_y

DMD_width:=XDMD_width-3

DMD_height:=XDMD_height-3

; Hardcode

If rom=hirolcas

{

DMD_width:=768

DMD_height:=294

DMD_X:=3840

DMD_Y:=125

}

If rom=simpprty

{

DMD_width:=768

DMD_height:=294

DMD_X:=3840

DMD_Y:=125

}

If rom=ripleys

{

DMD_width:=768

DMD_height:=294

DMD_X:=3840

DMD_Y:=125

}

If rom=wpt_140a

{

DMD_width:=768

DMD_height:=294

DMD_X:=3840

DMD_Y:=125

}

If rom=taf_l7

{

DMD_width:=768

DMD_height:=238

DMD_X:=3840

DMD_Y:=200

}

If description=America's Most Haunted (Spooky Pinball LLC 2014)

{

RegRead, DMD_width, HKCU, Software\UltraDMD, w

RegRead, DMD_height, HKCU, Software\UltraDMD, h

RegRead, DMD_X, HKCU, Software\UltraDMD, x

RegRead, DMD_Y, HKCU, Software\UltraDMD, y

}

If B2S=True

{

FileReadLine, DMD_width, %TablePath%\ScreenRes.txt, 8

FileReadLine, DMD_height, %TablePath%\ScreenRes.txt, 9

FileReadLine, XDMD_X, %TablePath%\ScreenRes.txt, 10

FileReadLine, DMD_Y, %TablePath%\ScreenRes.txt, 11

DMD_X:=PF_width+XDMD_X ;Reference to Top Left of Playfield screen

}

}

;Disable Aero if Enabled

RegRead, DWMComp, HKCU, Software\Microsoft\Windows\DWM, Composition

Aero=%DWMComp%

If Aero=1

Run, sc stop uxsms,, Hide

If ext=fpt

Run, "%PinballX_Path%\Scripts\dc2.exe" -configure="%PinballX_Path%\Scripts\dc2config\FPSettings.xml",, Hide

Else

Run, "%PinballX_Path%\Scripts\dc2.exe" -configure="%PinballX_Path%\Scripts\dc2config\VPMSettings.xml",, Hide

If ext=fpt

{

Run, %WorkingPath%\%exe% /STAYINRAM /open "%TablePath%\%Table%" /play /exit

Process, Wait, Future Pinball.exe

If DMD_width>0

Run, %WorkingPath%\FutureDMD.exe table="%Table%" close=1

}

Else

{

Run, %WorkingPath%\%exe%.exe -play "%TablePath%\%Table%"

Process, Wait, %exe%.exe

}

Sleep, 30000 ; Allow time for table score display to get well beyond loading and boot images

; Fastest Capture

If ext=fpt

Run, %OBS_Path%\OBS.exe -portable -profiles "FuturePinball" -start,, Hide

Else

; Run, %FFMPEG_Path%\ffmpeg -t 70 -rtbufsize 1500M -f dshow -i audio=%Audio_Device% -f gdigrab -framerate 30 -offset_x 0 -offset_y 0 -video_size %PF_width%x%PF_height% -i desktop -c:v libx264 -preset ultrafast -qp 0 -c:a copy -threads 8 "%A_ScriptDir%\playfield.mkv",, Hide

Run, %FFMPEG_Path%\ffmpeg -t 70 -f gdigrab -framerate 30 -offset_x 0 -offset_y 0 -video_size %PF_width%x%PF_height% -i desktop -c:v libx264 -preset ultrafast -qp 0 -threads 8 "%A_ScriptDir%\playfield.mkv",, Hide

Run, %FFMPEG_Path%\ffmpeg -t 70 -f gdigrab -framerate 30 -offset_x %PF_width% -offset_y 0 -video_size %BG_width%x%BG_height% -i desktop -c:v libx264 -preset ultrafast -qp 0 -threads 8 "%A_ScriptDir%\bg.mkv",, Hide

If DMD_width>0

Run, %FFMPEG_Path%\ffmpeg -t 70 -f gdigrab -framerate 30 -offset_x %DMD_X% -offset_y %DMD_Y% -video_size %DMD_width%x%DMD_height% -i desktop -c:v libx264 -preset ultrafast -qp 0 -threads 8 "%A_ScriptDir%\dmd.mkv",, Hide

If ext=fpt

{

WinHide, ahk_class FuturePinball

WinMinimize, ahk_class FuturePinball

WinActivate, ahk_class FuturePinballOpenGL

WinWaitActive, ahk_class FuturePinballOpenGL

WinHide, ahk_class Button

WinHide, ahk_class Shell_TrayWnd

}

Else

{

WinActivate, Visual Pinball Player

WinWaitActive, Visual Pinball Player

}

Process, WaitClose, ffmpeg.exe, 80

Process, Close, %ErrorLevel%

WinClose, ahk_class OBSWindowClass

If ext=fpt

{

Sleep, 15000

Run, taskkill /im OBS.exe /f,, Hide

; CloseFP from FPLaunch

WinHide, ahk_class FuturePinball

WinMinimize, ahk_class FuturePinball

;Future Pinball must be closed this way instead of killing process

;or it wil not save your last game information.i.e score/credtis

WinActivate, ahk_class FuturePinballOpenGL

WinWaitActive, ahk_class FuturePinballOpenGL

Send {Esc}

WinWaitClose, ahk_class FuturePinballOpenGL

;saving fp table position, black screen hides fp window

; if (saveFPTables = "true") and (saveFPNeeded = "true") {

; ;WinRestore, ahk_class FuturePinball

; WinActivate, ahk_class FuturePinball

; WinWaitActive, ahk_class FuturePinball

; WinMenuSelectItem, ahk_class FuturePinball,,File,Save

; Sleep, 1000

; }

; IfExist %emupath%\FutureDMD.exe

Process, close, FutureDMD.exe

WinClose, ahk_class FuturePinball

WinWaitClose, ahk_class FuturePinball

WinShow, ahk_class Button

WinShow, ahk_class Shell_TrayWnd

}

Else

{

Run, taskkill /im %exe%.exe /f,, Hide

Process, close, UltraDMD.exe

}

Run, "%PinballX_Path%\Scripts\dc2.exe" -configure="%PinballX_Path%\Scripts\dc2config\StandardSettings.xml",, Hide

;Enable Aero if Enabled at the start of script execution

If Aero=1

Run, sc start uxsms,, Hide

; Post Capture Trim and Transcode

If ext=fpt

Run, %FFMPEG_Path%\ffmpeg -y -i "%A_ScriptDir%\playfield.mp4" -ss 5 -to 65 -vf [in]rotate=PI:bilinear=0[middle];[middle]scale=1920:-1[out] -map 0:1 -c:v libx264 -crf 26 "%PinballX_Path%\Media\%Name%\Table Videos\%description%.f4v"

Else

Run, %FFMPEG_Path%\ffmpeg -y -i "%A_ScriptDir%\playfield.mkv" -ss 5 -to 65 -vf [in]rotate=PI:bilinear=0[middle];[middle]scale=1920:-1[out] -map 0:0 -c:v libx264 -crf 26 "%PinballX_Path%\Media\%Name%\Table Videos\%description%.f4v"

Run, %FFMPEG_Path%\ffmpeg -y -i "%A_ScriptDir%\bg.mkv" -ss 5 -to 65 -vf "scale=1920:-1" -c:v libx264 -crf 26 "%PinballX_Path%\Media\%Name%\Backglass Videos\%description%.f4v"

If DMD_width>0

{

; If description=America's Most Haunted (Spooky Pinball LLC 2014)

; Run, %FFMPEG_Path%\ffmpeg -y -i "%A_ScriptDir%\dmd.mkv" -ss 5 -to 65 -vf "vflip" -c:v libx264 -crf 26 "%PinballX_Path%\Media\%Name%\DMD Videos\%description%.f4v"

; Else

Run, %FFMPEG_Path%\ffmpeg -y -i "%A_ScriptDir%\dmd.mkv" -ss 5 -to 65 -c:v libx264 -crf 26 "%PinballX_Path%\Media\%Name%\DMD Videos\%description%.f4v"

}

Process, WaitClose, ffmpeg.exe

; Clean up

FileDelete, %A_ScriptDir%\playfield.mp4

FileDelete, %A_ScriptDir%\playfield.mkv

FileDelete, %A_ScriptDir%\bg.mkv

FileDelete, %A_ScriptDir%\dmd.mkv

ExitApp