ajcl Posted November 21, 2014 Share Posted November 21, 2014 Check Frodus build post over @ VPForums, you'll need to use XPADDER to get the keys to map properly as NL must use ESC to exit out of PBFX2, Just search for Frodus and you'll find it there,it goes into detail a little more, I'd post the link but for some reason my work blocks that site and not this one.. Quote Link to comment Share on other sites More sharing options...
time299 Posted November 22, 2014 Author Share Posted November 22, 2014 LuukvgLooking at your files the issue you are having is caused by the fact that you are missing the two south park tables from your Pinball FX2.XML and your NukeLauncher.iniThe current release of NukeLauncher was release just prior to the ZEN's release of those two new tables, so you need to add them manually.See the support section, here to fix it.http://www.nukelauncher.com/item.asp?iid=13#AddNewTable Quote Link to comment Share on other sites More sharing options...
time299 Posted November 22, 2014 Author Share Posted November 22, 2014 ajclJust for the record NukeLauncher does not fores or require you use ESC as the exit key. That is just the default key I use, but you can set it to anything you want in the NukeLauncher.INI under KeyBindings / KB_Escape = esc. If you change it to KB_Escape = q then the exit key is set to your q key and if you are using a joystick its a bit more involved figuring out what to enter. But I posted some links previously in this thread on how to do that.I hope that help clear that upJeff / Time299 Quote Link to comment Share on other sites More sharing options...
ajcl Posted November 22, 2014 Share Posted November 22, 2014 Thanks for the clarification Time, I'm having a problem with South Park - Super Sweet Pinball Back glass, It loads fine in PBFX2, but when the game loads it doesn't show, This is the only table this is happening with. Quote Link to comment Share on other sites More sharing options...
frodus Posted November 22, 2014 Share Posted November 22, 2014 Check your pinballx xml file. See if it has backglass off. Several of mine were set to off. You can use gamemanager to easily sort through them. Quote Link to comment Share on other sites More sharing options...
ajcl Posted November 23, 2014 Share Posted November 23, 2014 Thanks Frodus, That was it, Quote Link to comment Share on other sites More sharing options...
Luukvg Posted November 23, 2014 Share Posted November 23, 2014 Omg, why didn't I see that... Thanks for your help.Jeff, I will start from scratch again and manually input all the tables in the nukelauncher.ini, in the correct order. I will post my results here.@ajcl I am using joy2key at the moment and tried switching keybinds. That didn't help. But tnx for your reply. Quote Link to comment Share on other sites More sharing options...
chosen_s Posted November 23, 2014 Share Posted November 23, 2014 ... I had an issue at first... The auto lister when nukelauncher first launches messed up the order of names... The order has to be perfect or else the correct game does not load... Just a little help for those that run into that Quote Link to comment Share on other sites More sharing options...
noiseprisoner Posted November 24, 2014 Share Posted November 24, 2014 After a bit of trial and error, I got this working with the few PBFX2 tables I own. Setting the table order manually in the nukelauncher.ini file was the big hurdle that solved my main issue. Cool launcher...I need to check out these PBFX2 tables now and see what they're like! Quote Link to comment Share on other sites More sharing options...
Luukvg Posted November 24, 2014 Share Posted November 24, 2014 Allright, I uninstalled Pinball FX2 and installed a fresh copy of everything. Manually edited the files, in the correct order, double checked everything. but no luck .Grid = 9x6. Southpark left top.Pinball FX2.xmlNukeLauncher.ini Quote Link to comment Share on other sites More sharing options...
time299 Posted November 24, 2014 Author Share Posted November 24, 2014 LuukvgLooking at your files I see a few issues. You have your StartLocation set to 14 are you sure that's correct? Most people have reported that after Zen released the south park tables they changed the default start location. The first SouthPark table is the new default starting location. Please check that by opening Pinball FX2 not NukeLauncher and not using PinballX and see what table is highlighted by default.Here is a link to the support page where this is discussed http://www.nukelauncher.com/item.asp?iid=13#StartLocationThe other issue I see is you have your rows and columns switched. 9x6 would be a grid 9 rows tall and each row would have 6 tables in it. I have never seen any screen configuration that would make Pinball FX2 layout that way. You said you are using landscape mode, so your GridDimensions should be set to 6x9. I just switched from Portrait 7x7 to landscape 6x9 and tested 8 tables all selected perfectly.Here is a link to the support page where this is discussed http://www.nukelauncher.com/item.asp?iid=13#GridDimensionsI hope this helps, and let us know.Jeff / Time299 Quote Link to comment Share on other sites More sharing options...
frodus Posted November 24, 2014 Share Posted November 24, 2014 I had to Name them exactly how they show in the xml under description/game name. Mine match for both entries in the xml. Quote Link to comment Share on other sites More sharing options...
Luukvg Posted November 25, 2014 Share Posted November 25, 2014 LuukvgLooking at your files I see a few issues. You have your StartLocation set to 14 are you sure that's correct? Most people have reported that after Zen released the south park tables they changed the default start location. The first SouthPark table is the new default starting location. Please check that by opening Pinball FX2 not NukeLauncher and not using PinballX and see what table is highlighted by default.Here is a link to the support page where this is discussed http://www.nukelauncher.com/item.asp?iid=13#StartLocationThe other issue I see is you have your rows and columns switched. 9x6 would be a grid 9 rows tall and each row would have 6 tables in it. I have never seen any screen configuration that would make Pinball FX2 layout that way. You said you are using landscape mode, so your GridDimensions should be set to 6x9. I just switched from Portrait 7x7 to landscape 6x9 and tested 8 tables all selected perfectly.Here is a link to the support page where this is discussed http://www.nukelauncher.com/item.asp?iid=13#GridDimensionsI hope this helps, and let us know.Jeff / Time299I see your point. I guess I can't read haha.I just tried your tips and it is working better now. Thanks all for the tips. Quote Link to comment Share on other sites More sharing options...
frodus Posted November 25, 2014 Share Posted November 25, 2014 Question for Jeff, I tried to set 2 player and it will get to the 2 player screen, but won't hit enter to execute the game. Ideas? Quote Link to comment Share on other sites More sharing options...
time299 Posted November 25, 2014 Author Share Posted November 25, 2014 Been working like mad on the Pinball Arcade NukeLauncher, I will look into that asap. Quote Link to comment Share on other sites More sharing options...
frodus Posted November 25, 2014 Share Posted November 25, 2014 It's a Low priority for me, so no rush. I have the delays pretty long to give the computer time to make page and key presses. Quote Link to comment Share on other sites More sharing options...
Les73gtx Posted November 26, 2014 Share Posted November 26, 2014 First off this is awesome software and I donated right away ... Thank you for your hard work and sharing your programming skills. I do have a problem and I am sure it is me but after 5 hours, no combinations of settings seem to work for me. I have read this thread complete and tried all suggestions. I think I need some fresh eyes on it.I can not get the table selection to work properly. It never picks the correct table inside PinballX. If I use the CMD example it will go to the walking dead just fine. I have changed the .xml file name to Zen FX2 but I am consistent with that naming throughout, I did this because I already had the PFX2 installed and working until the last 3 tables ... it is just to much to change every time ... for me anyways. I like the Zen FX2 naming as it is eaier for me and others to distinguish. Thank you for your timeNukeLauncher.iniZen FX2.xmlPinballX.inilog.txt Quote Link to comment Share on other sites More sharing options...
Les73gtx Posted November 26, 2014 Share Posted November 26, 2014 Well I figured it out after another 20 minutes .... testing every table confirmed works inside PinballX ... I had to change my Grid to; GridDimensions = 7x8 I guess that has to do with the Venom to be released soon. Thank you for this great software. Quote Link to comment Share on other sites More sharing options...
time299 Posted November 26, 2014 Author Share Posted November 26, 2014 Yep, looks like a new table is coming out so most people will need to update the NukeLauncher.ini and changeGridDimensions = 7x7to GridDimensions = 7x8This has already changed 3 times and will again in the future.So always check on the NukeLauncher Documentation / Support page for the most current information. Quote Link to comment Share on other sites More sharing options...
ajcl Posted November 26, 2014 Share Posted November 26, 2014 Hi Jeff,Once the new table is released where do we obtain the backglass/Table images DMD vid, if we want to buy the table and use it in PBX/NL? Did you create all the ones you offered in your package? Quote Link to comment Share on other sites More sharing options...
time299 Posted November 27, 2014 Author Share Posted November 27, 2014 Hi Jeff,Once the new table is released where do we obtain the backglass/Table images DMD vid, if we want to buy the table and use it in PBX/NL? Did you create all the ones you offered in your package?Good question.When I get the table I will update the media pack, but that may not be very fast. So for the quickest updates you should look here (http://www.pinsimdb.org/pinball/index-60-pinball_fx2) or on the forum FTP servers.As for the source for the media pack most of it is my own creation, but some of it is originally from the site above and then edited by me.Jeff / Time299 Quote Link to comment Share on other sites More sharing options...
chosen_s Posted November 27, 2014 Share Posted November 27, 2014 Jeff, your stuff is the best, I'd like to have my setup consistent [emoji41] Quote Link to comment Share on other sites More sharing options...
ajcl Posted November 27, 2014 Share Posted November 27, 2014 I agree Chosen, I'd rather wait as well, I'm in no hurry, What I have now is working AWESOME!! Quote Link to comment Share on other sites More sharing options...
ruebsy Posted November 30, 2014 Share Posted November 30, 2014 Hello!Just found nuke launcher today and am totally impressed. I made quite a few mistakes when setting it up and then finally got it picking the correct tables. I too ran into the good news window coming up everytime. After running as admin, and turning windows notifications off it works as it should. There are some tables that load, but somehow move to the choose number of players screen(infinity gauntlet) to name one. Any suggestions as to what may be causing this? It's really the only issue I have. Jeff I will be donating on my next payday...this is too sweet! Quote Link to comment Share on other sites More sharing options...
time299 Posted November 30, 2014 Author Share Posted November 30, 2014 RuebsyCan you attach your files, so I can help. also can you describe your issue with a little more detail? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.