UltraVPServer and B2S tables

[mariozeferino]

first off all, PinballX is great, thank for this great frontend. it works perfectly.

I was using GameeX before to launch pinball tables. and i had a problem exiting UltraVPServer and B2S tables, the table exits but the backglass stays in place

now i have the same problem with PinballX , Any ideas?

[R-DUB]

first off all, PinballX is great, thank for this great frontend. it works perfectly.

I was using GameeX before to launch pinball tables. and i had a problem exiting UltraVPServer and B2S tables, the table exits but the backglass stays in place

now i have the same problem with PinballX , Any ideas?

Look here. This may help you out.

http://www.vpforums.org/index.php?showtopic=23167

[mariozeferino]

thanks i ll have a look. but every table exits fine in both visual pinball and hyperpin.

i was hoping to hear from other users about UltraVPServer and B2S tables

[Legtod2]

I have the same issue on my pinball cabinet. Not experiencing the problem when running same tables in hyperpin but am when running in pinballx

[bimbo]

Hi! I had the same issue until I changed the exit key from "ESC" to "e".

That solved it for me.

[bimbo]

Unfortunately changing the exit key from ESC to e just solved the issue with ultravp backglasses. The b2s backglasses still stay on screen.

Now I changed back to ESC as exit key and disabled ESC key in visual pinball.

[nelson]

Go to vp forums and install the direct b2s server found here. http://www.vpforums.org/index.php?app=downloads&showfile=7426 then you can use the new backglasses ,once you got these running you pretty much can dump ultrauvpserver and hyperpin since all the direct b2s files and server files are all stored in your tables folder.

Here's a link to the backglasses and server threads.

http://www.vpforums.org/index.php?showforum=87

Hope this helps