BlockABoots

Thanks for the help. So there is no way to stop the auto start table option then?, this is a shame as a fair few Marvel Pinball FX tables have 'intros' at the start and Pinballx always cuts these off as it auto starts the table

Any help with above issues?

Sorry for the delay, i have attached the log and ini files The backglass shifting issue seems to have sorted it self but im still having issues with.... 1. Tables seem to automatically start after about 10 seconds of the table loading, im guessing the 'enter' key is being pressed by PinballX? 2. The auto hide task bar popping up on the blackglass monitor each time i load a table 3. A few tables dont appear to display the backglass image despite the name of the backglass being correct and using this same backglass image that loads up fine when just loading Pinball FX2 (without PinballX), any ideas why a few tables dont display the backglass in PinballX? log.txt PinballX.ini

Well the first problem, when using a resolution of 1440p for the playfield monitor, it seems to shift over the backglass when the Pinball FX2 table actually loads, so the backglass isnt centred anymore

Anyone?

I have just started to use Pinball X for the first time and am having a few issues. I am using a resolution of 1440x2560 for Pinball FX2 and when i loaded up PinballX the backglass image it correctly position but when i load a table then the backglass image disappears and then reappears but now its shifted over to the left, now im guess this is because im not using 1080p resolution how to i get the image to display centred when using 1440p? In windows i have set the task bar to auto hide, when in PinballX it seems to bring the taskbar out of hiding each time i load a table, how do i stop this from happening? A few tables dont appear to display the backglass image despite the name of the backglass being correct and using this same backglass image that loads up fine when just loading Pinball FX2 (without PinballX), any ideas why a few tables dont display the backglass in PinballX? I have noticed for every table that after about 10 seconds of the table loading it seems to auto start a game, im guessing the 'enter' key is being pressed by PinballX, how do i stop this from happening? For the time being i think thats it, thanks for any help given!!

Does anyone have a complete backglass package in on zip file please, as i seem to be able to only download 1 file every 60 minutes

Changing the 'Wait for' value doesn't seem to effect the amount of time it sits on the pinball arcade title screen though

I have a few quires about Pinball Arcade menu.... 1. When selecting a table is it possible to have the backglass of that table for the background image so it changes like the wheel art does when you select a table? 2. Is it possible when selecting a table and Pinball Arcade loads to have the table select menu scroll up as well as down instead of just down, for example if i select Xenon to play instead of just scrolling up 1 to Xenon PinballX scrolls down all the way through the 60 odd tables to get to Xenon?? 3. For some reason im having issues with Black Knight wheel art in PinballX, i load up the Game Manager and select a png file i want for Black Knight but for some reason the art work if not being enabled and it keeps defaulting back to Black Knight 2000 wheel art. I have even tried delecting the info for Black Knight and re-adding it without artwork but as soon as i reload Game Manager it has applied the Black Knight 2000 wheel art itself, any ideas?? 4. Have music files play when select different tables? Thanks

Ok fixed it now. For some reason when i select a Pinball Arcade table to load it sits on the Pinball Arcade title screen for 15 or so seconds before going to the table select screen and selecting the table i chose in PinballX. Any ideas why it sits for so long on the Pinball Arcade title screen?

Ok thanks, I have attached my files. To be fair everything should be at default settings bar the Pinball Arcade settings log.txt PinballX.ini

All i have done so far is install PinballX and go to the Pinball Arcade settings and told PinballX where its installed to, but when i select a table in PinballX it just loads Pinball Arcade and stays on the title screen where it ask you to press start. Is there other steps i need to do then?

Sorry to hijack this thread, but when i load a table from PinballX it just seems to load Pinball Arcade program and doesn't auto load the table i have selected from PinballX!. Any ideas?

Anyone?

Am new to PinballX and am wanting just to use it for displaying Pinball FX 2 tables. I have a standalone install of Pinball FX 2 and have used the setup wizard of PinballX to set the folder locations of Pinball FX 2 and have disabled Visual Pinball and Future Pinball, but when i start pinballX there is not pinball fx 2 tables listed!. Here is my config file [Display]Monitor=0rotate=0Windowed=FalseWindowWidth=480WindowHeight=720WindowX=0WindowY=65PlayFieldBrightness=230WheelTextColor=ffffffffWheelTextOutlineColor=ff000000InfoTextColor=ffffffffInfoTextOutlineColor=ff000000FilterTextColor=ffffffffFilterTextOutlineColor=ff000000MenuColor=ffffa500[BackGlass]monitor=1x=0y=0width=1280height=1024[DMD]Enabled=Falsemonitor=2x=0y=0width=900height=300[FileSystem]EnableFileMatching=True[Interface]DesktopModeEnabled=TrueEnableAdditionalDetail=TrueShowSystem=TrueShowRatings=True[Audio]StreamVolume=90SampleVolume=90PlaySoundInVideos=True[Startup]playsound=Falseplayvideo=FalseStartWithWindows=No[KeyCodes]quit=27left=37right=39select=13rotate=82pageleft=33pageright=34exitemulator=27ingame=80screenshot=83screenshotbackglass=66instructions=73[JoyCodes]quit=10left=0right=1select=2rotate=3pageleft=4pageright=5exitemulator=6ingame=13instructions=14[Text]Line1=Free PlayLine2=Press Start[FuturePinball]Enabled=FalseWorkingPath=h:\-PINBALL-\-FUTURE PINBALL-TablePath=h:\-PINBALL-\-FUTURE PINBALL-\TablesExecutable=Future Pinball.exeParameters=/open "[TABLEPATH]\[TABLEFILE]" /play /exit /arcaderenderLaunchBeforeEnabled=falseLaunchBeforeWorkingPath=LaunchBeforeExecutable=notepad.exeLaunchBeforeHideWindow=FalseLaunchBeforeWaitForExit=TrueLaunchAfterEnabled=FalseLaunchAfterWorkingPath=LaunchAfterExecutable=notepad.exeLaunchAfterHideWindow=FalseLaunchAfterWaitForExit=TrueMouseClickFocus=True[VisualPinball]Enabled=FalseWorkingPath=h:\-PINBALL-\- VISUAL PINBALL -TablePath=h:\-PINBALL-\- VISUAL PINBALL -\TablesExecutable=VPinball_9_0_2.exeParameters=/play -"[TABLEPATH]\[TABLEFILE]"LaunchBeforeEnabled=falseLaunchBeforeWorkingPath=LaunchBeforeExecutable=notepad.exeLaunchBeforeHideWindow=FalseLaunchBeforeWaitForExit=TrueLaunchAfterEnabled=FalseLaunchAfterWorkingPath=LaunchAfterExecutable=notepad.exeLaunchAfterHideWindow=FalseLaunchAfterWaitForExit=True[ExitScreen]Enabled=TrueEnableExit=TrueEnableShutdown=True[StartupProgram]Enabled=falseWorkingPath=Executable=notepad.exeParamaters=HideWindow=trueWaitForExit=false[ExitProgram]Enabled=falseWorkingPath=Executable=notepad.exeParamaters=HideWindow=FalseWaitForExit=[AttractMode]Enabled=TrueTimer=1ShowFor=15[System_1]Name=Pinball FX2Enabled=TrueWorkingPath=D:\Program Files (x86)\PinballFX2TablePath=D:\Program Files (x86)\PinballFX2\data_steamExecutable=Pinball FX2.exeParameters=LaunchBeforeEnabled=TrueLaunchBeforeWorkingPath=D:\PinballX\ScriptsLaunchBeforeExecutable=Pinball FX2.exeLaunchBeforeHideWindow=FalseLaunchBeforeWaitForExit=FalseLaunchAfterEnabled=TrueLaunchAfterWorkingPath=D:\PinballX\ScriptsLaunchAfterExecutable=ledset.batLaunchAfterHideWindow=TrueLaunchAfterWaitForExit=FalseLaunchBeforeParameters=[TABLEFILE]My Pinball FX 2 install is installed to D:\Program Files (x86)\PinballFX2 so does anything look out of place in the config file?, i noticed that i didnt have a script folder in my PinballX install folder what should be added to that script folder to get pinball fx 2 working if anything is needed?? thanks for any help