Just a short notice if you have a pinDMD3  and a Teensy 3.2 with an octo28 adaptor. When installing both in your cab, the pinDMD3 didn't show anything in PBX All tables worked fine, but not in PBX. Both are Teensy boards, but my DMD was on com5 and the Teensy 3.2 on com3 the pinDMD_log.txt in the pinballX fodlers shows : dll version: REV-pinDMD3-01006 locating device: PASS (COM3) creating connection: FAIL (COM3) pinDMD3 enabled: FALSE This should